Analysis of the Model Predictive Current Control of the Two Level Three Phase Inverter
Analysis of the Model Predictive Current Control of the Two Level Three Phase Inverter
Model Predictive Control (MPC) Algorithms have been very popular and used widely in industrial applications of power converters and drives. Major advantage of MPC is the flexibility to control different variables, with constraints and additional system requirements. Also, it has been an alternative to the classical control techniques without need of additional modulation techniques, MPC needs the proper system model in order to calculate optimum values of the controlled variables. This paper gives an introduction about the Model Predictive Current Algorithm. Model Predictive Current Control Algorithm is implemented for a two phase three level drive system. After the system is modelled, the control algorithm is verified for different load condition of an induction machine.
___
- Morari, M., Lee, J.H., 1999. Model predictive control: past,present and future, Comp.Chem.Eng., 23, p.667-682. Lee, J.H., 2011. Model Predictive Control: Review of the three decades of development, Int.J.Cont.Autom.Syst, 9(3), p. 415-42 Linder, A., Kennel R., "Model Predictive Control for Electric Drives", 36th Power Electronics Specialists Conference, 2005, 1793-1799. Kazmierkowski M.P., Krishnan R., ve Blaab erg, “Control in Power electronics, NewYork:Academic Press, 2002. Wang F., Li S., Mei X., Xie W., Rodriguez J., Kennel, R.M.,“Model-Based Predictive Direct Control Strategies for Electrical Drives: An Experimental Evaluation of PTC and PCC Methods”, IEEE Trans. On Ind. Informations, 11,3, 2015. Cortes,P.,Kazmierkowski, M.P., Kennel, R.M., Quevedo, D.E. ve Rodriguez, J., “Predictive Control in Power Electronics and Drives”, IEEE Trans. Ind. Electron., 55, 12, 4312-4324, Dec.2008. Kennel, R., Rodriguez, J., Espinoza, J., Trincado, M., 2010. High Performance Speed Control Methods for Electrical Machines: An Assessment, IEEE Int. Conf. On Industrial Technology, p.1793-1799. Buja, G.S., Kazmierkowski, M.P., Direct Torque Control of PWM Inverter-Fed AC motors- a Survey, IEEE Trans. on Industial Electronics.,1793-1799. Geyer, T., Papafotiou, G. And Morari, M., “Model Predictive Direct Torque Control-Part1: Concept, algorithm and Analsis”, IEEE Trans. Ind. Electron, 56, 6, 2009, 1894-1905. Papafotiou, G., Kley, J., Papadopolus, K.G., Bohnen, P., and Morari, M., “Model Predictive Direct Torque Control –Part II: Implementation and E perimental Evaluation”, IEEE Trans. Ind. Electron, 56, 6, 2009, 1906-1915 Geyer, T., 2014. Quevedo, D.E., "Multistep Finite Control Set Model Predictive Control for Power Electronics", IEE Trans. On Power Electronics, 29, 12. Scoltock, J., Geyer, T., Madawana, U., 2013. A Comparison of Model Predictive Control Schemes for MV Induction Motor Drives, IEEE Trans.of Industrial Informatics, 9(2), p.909-919. Rodríguez J., Pontt J., Silva C., Correa P., Lezana P., Cortes P., Amman U., “Predictive Current Control of a Voltage Source Inverter IEEE Trans. On Industrial Electronics, 54, 1, February 2007. Karamanakos, P., Stolze P., Kennel R.M., Manias S., Mouton H.T., “Variable Switching Point Predictive Torque Control of Induction Machines”, IEEE Journal of Emerging and Selected Topics in Power Electronics, 2,2, 2014. Stolze, P., Karamanakos, P., Moiton, T., Manias, S.N., 2013. Heuristic Variable Switching Point Predictive Current Control for the Three-Level Neutral Point Clamped Inverter", SLED
- ISSN: 2651-5199
- Başlangıç: 2018
- Yayıncı: İstanbul Gedik Üniversitesi
Sayıdaki Diğer Makaleler
Some Curvature Properties of Generalized Complex Space Forms
Analysis of the Model Predictive Current Control of the Two Level Three Phase Inverter
Kinetic Investigation of Bronized 34CrAlNi7 Nitriding Steel
Polat TOPUZ, Tuna AYDOĞMUŞ, Özlem AYDIN