___

• Gedikli, H. The Investigation of Flat Shell Elements by Using The Refined Finite Element Method, Ph.D. Thesis, Karadeniz Technical University, Turkey, 2005 (in Turkish).
• Zhang, X.Y, Cheung Y.K., Chen, W.J. Two refined non-conforming quadrilateral flat shell elements, Int J Num Meth Engng, 49, 355-382, 2000.
• Batoz, J.L., Hammadi, Zheng, F., Zhong, C. On the linear analysis of plates and shells using a new-16 degrees of fredom flat shell element, Computers and Structures, 78, 1120, 2000.
• Dawe, D.J. Shell analysis using a simple facet element, J Strain Analysis, 7, 266-270, 1972.
• Morley, L.S.D. The constant moment plate bending element, J Strain Analysis, 6, 2024, 1971.
• Batoz, J.L, Zheng, C.L, Hammadi, F. Formulation and evaluation of new triangular, quadrilateral, pentagonal and hexagonal discrete Kirchhoff plate/shell elements, Int J Num Meth Engng, 52, 615-630, 2000.
• Batoz, J,L, Dhatt, G., Development of two simple shell elements. American Institute of Aeronautics and Astronautics, 10, 237-238, 1972.
• Bathe, K,J, Ho, L.W. A simple and effective element for the analysis of general shell structures”, Computers and Structures, 13, 673-681, 1981.
• Carpenter, N., Stolarski, H., Belytschko, T. A flat triagular shell element with improved membrane interpolation”, Computer Methods in Applied Mechanics and Engineering, 1, 161-168, 1985.
• 0] Dhatt, G., Marcotte, L., Matte, Y., Talbot M. Two new discrete Kirchhoff plate shell elements, 4th Symposium on Numerical Methods in Engineering, Atlanta, Georgia, 599604, 1986.
• 1] Fafard, M., Dhatt, G., Batoz, J.L. A new discrete Kirchhoff plate/shell element with updated procedures, Computers and Structures, 31, 591-606, 1989.
• 2] Talbot, M., Dhatt, G. Three discrete Kirchhoff elements for shell analysis, with large geometrical non linearities and bifurcations, Engineering Computations, 4,415-22, 1987.
• 3] Poulsen, P.N, Damkilde, L. A flat triangular shell element with loof modes, Int J Num Meth Engng, 39, 3867-3887, 1996.
• 4] Samuelson, A. The global constant strain condition and the patch test, Energy Methods in Finite Element Analysis, Wiley: New York, 47-52, 1979.
• 5] Felippa, C.A, Haugen, B. Militello, C. From the individual element test to finite element templates: evolution of patch test, Int J Num Meth Engng, 38, 199-229, 1995.
• 6] Noor, A.K. Bibliography of monographs and surveys on shells, Applied Mechanics Review, 43, 223-224, 1990.
• 7] Argyris, J.H, Papadrakkakis, M, Apostolopoulou, C., Koutsourelakis, S. The TRIC shell element: theoretical and numerical investication”, Computer Methods in Applied Mechanics and Engineering, 182, 217-245, 2000.
• 8] Zhong, W.X., Zeng, J. Rotational finite elements, J Comp Struct Mech Appl, 13, 1-8, 1996.
• 9] Zienkiewicz, O.C, Taylor, R.L. The Finite Element Method, Vol.1-3, 5.ed. ButterworthHeinemann, Oxford, 2000.
• 0] MacNeal, R.H., Harder, R.L. A proposed standard set of problems to test finite element accuracy, Finite Element Analysis and Design, 1, 3-20, 1985.
• 1] Green, S, Turkiyyah, G. Second Order Accurate Constraint Formulation for Subdivision Finite Element Simulation of Thin Shells, Int J Num Meth Engng, 61(3), 380-405, 2004.
• 2] Huges, T.J.R., Liu, W.K. Nonlinear finite element analysis of shells, part II: twodimensional shells, Comp Meth Appl Mech Eng, 27, 167-182, 1981.
• 3] Bathe, K.J., Dvorkin, E.N. A formulation of general shell elements-the use of mixed interpolation of tensorial components, Num Meth Eng, 22, 697-722, 1986.
• 4] Simo, J.C, Fox D.D. On a Stress Resultant Geometrically Exact Shell Model. Part II, The linear theory; computational aspects, Comp Meth Appl Mech Eng, 73, 53-92, 1989.
• 5] Belytschko, T., Leviathan, I. Physical stabilization of the 4-node shell element with one point quadrature, Comp Meth Appl Mech Eng, 113, 321-350, 1994.