Coupled Thermal and Structural Finite Element Solution of Dental Crown Structures
The objective of this study is to calculate the temperature and thermal stress distributions related to time as a result of hot/cold liquid intake to the mouth utilizing finite element analysis (FEA). The crown models were developed and analyzed using ANSYS software. In the first step of the study, the temperature changes under thermal loading as a result of hot/cold liquid in the mouth were obtained depending on time. In the second step, the thermal stresses produced by temperature changes were calculated. The distributions of temperatures and thermal stresses were drawn for some critical nodes. The effect of different metal and ceramic substrates on thermal response was considered. In the research, Ni-Cr alloy (NC) substrate experienced the highest values of thermal stresses; comparatively the lowest stresses were calculated for Alumina core (AL) substrate. The values of the maximum thermal stresses for Zirconia core (ZrO2) and IPS Empress 2 (IE 2) were very close, but the values of it used IE 2 was smaller that ZrO2.
___
- Mackerle, J. Finite element modeling of ceramics and glass: a bibliography. Engineering computations, 16, 510-571, 1999.
- Mackerle, J. Finite element analyses and simulations in biomedicine: a bibliography. Engineering Computations, 17, 813-856, 2000.
- Thompson, V.P., Rekow, D.E. Dental ceramics and the molar crown testing ground. J Appl Oral Sci., 12, 26-36, 2004.
- Cattell, M.J., Palumbo, R.P., Knowles, J.C., Clarke, R.L., Samarawickrama, D.Y., The effect of veneering and heat treatment on the flexural strength of Empress 2 ceramics. J Dent., 30, 161-169, 2002.
- Aykul, H., Toparlı, M., Dalkız, M.A. A calculation of stress distribution in metalporcelain crowns by using three-dimensional finite element method. J Oral Rehabil., 29, 381-386, 2002.
- Qualtrough, A.J., Piddock, V., Ceramics update. J. Dent. 25, 91-95, 1997.
- Toparlı, M., Sasaki, S. Finite element analysis of the temperature and thermal stress in a post restored tooth. J. Oral Rehabil., 30, 921-926, 2003.
- Isgrò, G., Kleverlaan, C.J., Wang, H., Feilzer, A.J., Thermal dimensional behavior of dental ceramics. Biomaterials., 25, 2447-2453, 2004.
- Toparlı, M, Gokay, N., Aksoy, T., Analysis of a restored maxillary second premolar tooth by using three-dimensional finite element method., J. Oral Rehabil., 26, 157-164, 1999.
- DeHoff, P.H., Anusavice, K.J., Shear stress relaxation of dental ceramics determined from creep behavior. Dent Mater., 20, 717-725, 2004.
- Ho, M.H., Lee, S.Y., Chen, H.H., Lee, M.C. Three-dimensional finite element analysis of the effects of posts on stress distribution in dentin. J. Prosthet Dent. 72, 367-372, 1994.
- Verdonschot, N., Fennis, W.M., Kuijs, R.H., Stolk, J., Kreulen, C.M., Creuqers, N.H. Generation of 3-D finite element models of restored human teeth using micro-ct techniques. I. J. Prosthodont., 14, 310-315, 2001.
- Sorensen, J.A., Martinoff, J.T. Clinically significant factors in dowel design, J. Prosthet Dent., 52, 28-35, 1984.
- Ukon, S., Moroi, H., Okimoto, K., Fujita, M., Ishikawa, M., Terada, Y., Satoh, H. Influence of different elastic moduli of dowel and core on stress distribution in root. Dent Mater J., 19, 50-64, 2000.
- Combe, E.C., Shaqlouf, A.M., Watts, D.C., Wilson, N.H., Mechanical properties of direct core build-up materials. Dent. Mater. 15, 158-65, 1999.
- Güngör, M.A., Kücük, M., Dündar, M., Karaoğlu, Ç., Artunç, C., Effect of temperature and stress distribution on all-ceramic restorations by using a three-dimensional finite element analysis, J. Oral Rehabil., 31, 172-178, 2004.
- Toparlı, M., Sasaki, S., Finite element analysis of the temperature and thermal stress in a post restored tooth. J. Oral Rehabil., 30, 921-926, 2003.
- Dai, K., Shaw, L., Thermal and mechanical finite element modeling of laser forming from metal and ceramic powders. Acta Mater., 52, 69-80, 2004.
- Çelik, E., Avcı, E., Hasçiçek, Y.S., Synthesis and characterization of high temperature compatible ZrO2 insulation coatings on Ag/AgMg sheathed Bi-2212 wires and tapes. Surf. Coat. Tech., 161, 179-187, 2002.
- Delfosse, D., Cherradi. N., Ilschner, B., Numerical and experimental determination of residual stresses in graded materials. Compos. Part B-Eng. 28, 127-141, 1997.
- ANSYS Procedures. Engineering analysis system verification manual, vol. 1, Swanson Analysis System Inc., Houston, PA, USA, 1993.
- Moaveni, S., Finite element analysis: Theory and application with ANSYS, Pearson Education, New Jersey, USA, 2003.
- Dieter, G.E., Mechanical Metallurgy, McCraw-Hill Book Company; London, UK, 1988.
- Braden, M., Heat conduction in teeth and the effect of lining materials. J. Dent Res. 43, 315-322, 1964.
- Hood, J.A.A., Biomechanics of intact, prepared and restored tooth: some clinical implications., I. Dent. J. 41, 25-32, 1991.
- Farah, J.W., Craig, R.G. Finite element stress analysis of a restored axisymmetric first molar., J. Dent. Res., 53, 859-866, 1974.
- Magne, P., Versluis, A., Douglas, W.H. Effect of luting composite shrinkage and thermal loads on the stress distribution in porcelain laminate veneers, J. Prosthet. Dent. 81, 335-344, 1999.
- Başlangıç: 2009
- Yayıncı: Akdeniz Üniversitesi
Sayıdaki Diğer Makaleler
S.S. Malihi, A.Behravan Rad, F. Nazari
M. Mashud, Md. Nizam Uddin, T. Waliullah, A. Umemura
A. K. Baltacıoğlu, B. Öztürk, Ö. Civalek, B. Akgöz
B. Gutti, A. A. Susu, O. A. Fasanmade
M.A. Gungor, S. Mammadzada, F. Sen, C. Artunc
Mohammad Mashud, Imtiaz Ahmed Faride, Mohammad Rizwen Ur Rahman