AN OPTIMIZE SYSTEM OF USING CUTTING FLUID IN MACHINING OPERATION FOR LIGHT WORK MACHINE SHOP
Cutting fluid is essential for the better performance in any machining operation; it is desirable for the cutting tool life and degree of accuracy of the operation to supply proper cutting fluid. The quality of the finish product largely depends on it. But in light machine shop the aspect of cutting fluid are ignored. Though there is high energy consumption, huge maintenance works, and complicated system used by machine shop but there is little use of any lubrication system. In such situation a work force need to develop an optimize system for the proper supply of cutting fluid during operation. In this research the system is used mainly mechanical energy of air pressure through foot pumper use to supply the adequate amount of cutting fluid in to the cutting area. The system developed in this research is handy and portable so it is useable for any machine in the machine shop and provides the flexibility of use with low maintenance and also very much cost effective
Keywords:
Cutting fluid Machining operation, Foot pumper, Maintenance,
___
- D. P. Adler, W. W-S Hii, D. J. Michalek, and J. W. Sutherland, “Examining the Role of Cutting Fluids in Machining and Efforts to Address Associated Environmental/Health Concerns”. Department of Mechanical Engineering – Engineering Mechanics. Sustainable Futures Institute, Michigan Technological University.
- O. Çakīr, A. Yardimeden, T. Ozben, E. Kilickap, “Selection of cutting fluids in machining processes”. Department of Mechanical Engineering, Dicle University, 21280 Diyarbakir, Turkey.
- Wisley Falco Sales, Anselmo Eduardo Diniz, Álisson Rocha Machado, “Application of Cutting Fluids in Machining Processes”. J. Braz. Soc. Mech. Sci. vol.23 no.2 Rio de Janeiro, 2001.
- Cost-Effective Manufacturing Machining Brass, Copper and its Alloys, Copper Development Association, Publication TN44, 1992.
- E. Kuram, B. Ozcelik, E. Demirbas, and E. Şık, “Effects of the Cutting Fluid Types and Cutting Parameters on Surface Roughness and Thrust Force”. Proceedings of the World Congress on Engineering 2010 Vol II WCE 2010, June 30 - July 2, 2010, London, U.K.
- Jeffrey B. Dahmus and Timothy G. Gutowski, “An environmental analysis of machining”. Massachusetts Institute of Technology, Department of Mechanical Engineering, 77 Massachusetts Avenue, Room 35-234, Cambridge, Massachusetts 02139 USA.
- Patrick Adebisi Olusegun Adegbuyi, Ganiyu Lawal, Oluwatoyin Oluseye, Ganiyu Odunaiya, “Analyzing the effect of cutting fluids on the mechanical properties of mild steel in a turning operation”. American journal of scientific and industrial research 2010.
- J. W. Sutherland, A. Gandhi, V. N. Kulur, W. K. Chan, Y. K. Siow, “Cutting Fluids in Machining: Heat Transfer and Mist Formation Issues”. Department of Mechanical Engineering - Engineering Mechanics, Michigan Technological University, Houghton, MI 49931-1295.
- X.C. Tana,*, F. Liua, H.J. Caoa, H. Zhangb, “A decision-making framework model of cutting fluid selection for green manufacturing and a case study”. Journal of Materials Processing Technology 129 (2002) 467-4706.
- Jain R.K. 2003, 6th edition, Production technology.
- Kalpakjian, 1996, Manufacturing process & technology.
- Başlangıç: 2009
- Yayıncı: Akdeniz Üniversitesi