___

• REFERENCES [1] Baek, S.M., Yu, S.H., Namc, J. H. (2011). A Numerical Study on Uniform Cooling of Large-Scale PEMFCs with Different Coolant Flow Field Designs, Applied Thermal Engineering, 31, 1427-1434. [2] Derby, M., Lee, H. J., Peles, Y., Jensen, M. K. (2012). Condensation heat transfer in square, triangular, and semicircular mini-channels, International Journal of Heat and Mass Transfer, 55, 187–197. [3] Ye, L., Tong, M.W., Zeng, X. (2009). Design and analysis of multiple parallel-pass condensers, International Journal of Refrigeration, 32, 1153 – 1161. [4] Jarrett, A., II Yong, K. (2011). Design optimization of electric vehicle battery cooling plates for thermal performance, Journal of Power Sources, 196,10359-10368. [5] Panchal, S., Khasow, R., Dincer I., Agelin-Chaab M., Fraser R., Fowler M. (2017). Thermal Design and Simulation of Mini-channel Cold Plate for Water Cooled Large Sized Prismatic Lithium-ion Battery, Applied Thermal Engineering, 122, 80–90. [6] Yenigün, O., Çetkin, E. (2016). Experimental and Numerical Investigation of Constructal Vascular Channels for Self-cooling: Parallel Channels, Tree-shaped and Hybrid designs, International Journal of Heat and Mass Transfer, 103,1155–1165. [7] Kurnia, J.C., Sasmito, A.P. (2011). Numerical Investigation of Laminar Heat Transfer Performance of Various Cooling Channel Design, Applied Thermal Engineering, 31, 1293-1304. [8] Yutao, H., Zhonghao, R., Xinjian, L., Jiateng Z. (2015). Investigation of Power Battery Thermal Management by Using Mini-channel Cold Plate, Energy Conversion and Management, 89, 387–395.