A numerical study of mixed convection heat transfer in a lid-driven cavity using Al2O3-water nanofluid

A numerical study of mixed convection heat transfer in a lid-driven cavity using Al2O3-water nanofluid

This study aims a numerical investigation of steady, laminar mixed convection heat transfer in a two-dimensional cavity by employing a finite volume method with a fourth-order approximation of convective terms, when nanoparticles are present. With the aim of solving two-dimensional momentum and energy conservation equations, a finite volume method on a non-uniform staggered grid is utilized. Second-order central differences are utilized to approximate diffusion terms in momentum and energy equations, while the development of a non-uniform four-point fourth-order interpolation (FPFOI) scheme is performed for the convective terms. Continuity and momentum equations are solved using the SIMPLE (Semi-Implicit Method for Pressure-Linked Equation) algorithm. In order to evaluate heat transfer enhancement, various viscosity and thermal conductivity models were employed. Numerical solution results were obtained in different models in cases where Gr number is between 103 and 105, Re number is 10-100-1000 and nanoparticle volumetric fraction is 0-5%.

___

  • 1. Esfe, M. H.; Saedodin, S.; Malekshah, E. H.; Babaie, A.; Rostamian, H. J. Therm. Anal. and Calorim. 2019, 135 (1), 813-859.
  • 2. Tiwari, R. K.; Das, M. K. Int. J. Heat Mass Transf. 2007, 50, 2002-2018.
  • 3. Talebi, F.; Mahmoudi, A. H.; Shahi, M. Int. Commun. Heat Mass Tran. 2010, 37 (1), 79-90.
  • 4. Arefmanesh, A.; Mahmoodi, M. Int. J. Therm. Sci. 2011, 50 (9), 1706-1719.
  • 5. Brinkman, H. C. J. Chem. Phys. 1952, 20 (4), 571-582.
  • 6. Maiga, S. E. B.; Nguyen, C. T.; Galanis, N.; Roy, G. Heat transfer enhancement in forced convection laminar tube flow by using nanofluids, Proceedings of the International Symposium on Advances in Computational Heat Transfer III, Paper CHT-040101, p. 24, Begell House Publishers, 2004.
  • 7. Chamkha, A. J.; Rashad, A. M.; Armaghani, T.; Mansour, M. A. J. Therm. Anal. Calorim. 2018, 132 (2), 1291-1306.
  • 8. Kapil, M.; Roy, D., Sharma, B., Rana, S. C., Pramanik, S., Barman, R. N. Mater. Today-Proc. 2019, 11, 700-707.
  • 9. Abu-Nada, E.; Masoud, Z.; Hijazi, A. Int. Commun. Heat Mass Tran. 2008, 35 (5), 657-665.
  • 10. Kim, C. S.; Okuyama, K.; Fernández de la Mora, J. Aerosol Sci. Tech. 2003, 37 (10), 791-803.
  • 11. Yapici, K.; Obut, S. Int. J. Numer. Method H. 2015, 25 (5), 998-1029.
  • 12. Einstein, A. Investigations on the theory of the Brownian movement, Dover Books, 1956.
  • 13. Maxwell, J.C. A Treatise on Electricity and Magnetism. Third ed Clarendon Press, Oxford, 1904.
  • 14. Chandrasekar, M.; Suresh, S.; Chandra Bose, A. Exp. Therm. Fluid Sci. 2010, 34 (2), 210-216.
  • 15. Öğüt, E. B.; Kahveci, K. J. Mol. Liq. 2016, 224, 338-345.
  • 16. Yapici, K.; Obut, S. Heat Transfer Eng. 2015, 36 (3), 303-314.
  • 17. Heydari, M. R.; Esfe, M. H.; Hajmohammad, M. H.; Akbari, M.; Esforjani, S. S. M. Heat Transf. Res. 2014, 45 (1), 75-95.
  • 18. Taamneh, Y.; Bataineh, K., Stroj. Vestn-J. Mech. E. 2017, 63 (6), 383-393.
  • 19. Lauriat, G. Appl. Therm. Eng. 2018, 129, 1039-1057.
International Journal of Chemistry and Technology-Cover
  • Yayın Aralığı: Yılda 2 Sayı
  • Başlangıç: 2017
  • Yayıncı: İbrahim DEMİRTAŞ
Sayıdaki Diğer Makaleler

A numerical study of mixed convection heat transfer in a lid-driven cavity using Al2O3-water nanofluid

Neşe KEKLİKCİOĞLU ÇAKMAK, Hasan Hüseyin DURMAZUÇAR, Kerim YAPICI

Statistical analysis of the effect of melt flow index and weight changes on strength properties of polypropylene spunbond fabrics

İsmail TİYEK, Emrah KAÇMAZ, Mustafa YAZICI, Mahmut KILINÇKIRAN

The synthesizing of different hydrogel nanocarriers for oral insulin delivery

Pelin PEKER, Burcu OKUTUCU

Dynamic mechanical properties of epoxy resin matrix reinforced with sugarcane bagasse

Mustapha ABDULLAHİ

3,4-dimetoksifentoksi sübstitüenti taĢıyan periferik olmayan metaloftalosiyaninlerin fotovoltaik, termal, floresans ve agregasyon özellikleri

Derya GÜNGÖRDÜ SOLĞUN, Mehmet Salih AĞIRTAŞ, Sabit HOROZ

Effect of bleaching treatment on element content of enamel

Derya SURMELİOGLU, Zeyneb Merve OZDEMIR, Sevim ATILAN YAVUZ, Halime KOLSUZ

Phase transition of GeO2 crystal at high pressure: An ab initio molecular dynamics study

Sebahaddin ALPTEKİN

Theoretical B3LYP study of contrast agent metrizoate

Sedat Giray KANDEMİRLİ, M. İzzettin YILMAZER, Murat SARAÇOĞLU, Fatma KANDEMİRLİ

Use of peanut shell-based polyurethane type rigid foam in removing remazol orange RGB dye from aqueous solution

Bilal ACEMİOĞLU

Eco-friendly synthesis of nano copper and its use in fenton-like reactions for methylene blue degradation

Demet Demirci GÜLTEKİN, Azize ALAYLI, Hayrunnisa NADAROGLU