___

• Dhir, D. K., “Thermo-mechanical performance of automotive disc brakes”, Materials Today:Proceedings, 5, 1, 1864–1871, 2018.
• Nathi, G.M., Charyulu, T.N., Gowtham, K., Reddy, P.S., “Coupled structural/ thermal analysis of disc brake”. International Journal of Research in Engineering and Technology, 1, 4, 539-553, 2012.
• Borawski, A., “Conventional and unconventional materials used in the production of brake pads – review”. Journal Science and Engineering of Composite Materials, 27, 1, 374-396, 2020.
• Kumar, V., Kumaran, S., “Friction material composite: types of brake friction material formulations and effects of various ingredients on brake performance–a review”. Materials Research Express, 6, 8, 082005, 2019.
• Xiao, X., Yin, Y., Feng, X., Lu, L., Feng, X., “Review on the friction and wear of brake materials”. Advances in Mechanical Engineering, 8, 5, 1-10, 2016.
• Sundarkrishnaa, K., L., “Friction material composites copper-/metal-free material design perspective”, Springer Series in Material Science, 2015.
• Dante, R., C., “Handbook of friction material”, Woodhead Publishing, 2016.
• Yusubov, F., “Optimum design of brake friction composites”, Jurnal Tribologi 30, 133-148, 2021.
• Boz, M., Kurt, A., “The effect of Al2O3 on the friction performance of automotive brake friction materials”, Tribology International, 40, 7, 1161-1169, 2007.
• Boz, M., Kurt, A., “The influence of zinc on frıctıon-wear performance of powder metal brake frıctıon materials”, Journal of the Faculty of Engineering and Architecture of Gazi University, 21, 1, pp. 115-121, 2006.
• Almomani, M.A., Shatnawi, A.M., Alrashdan, M.K., “Effect of sintering time on the density, porosity content and microstructure of copper – 1 wt. % silicon carbide composites”, Advanced Materials Research, 1064, pp 32-37, 2015.
• Akkurt, O., Altıntaş, A., Çavdar, P.S, Çavdar, U., “Effect on the mechanical properties of sintering process of aluminium alloys”, International Scientific and Vocational Journal, 3, 2, 85-91, 2019.
• Aliuzzaman, M., Haque, M.M., Ferdous, M.J., Hoque, S.M., Hakim, M.A., “Effect of sintering time on the structural, magnetic and electrical transport properties of Mg0.35Cu0.20Zn0.45Fe1.94O4 ferrites”, World Journal of Condensed Matter Physics, 4, 1, 13-23, 2014.
• Boz, M., Kurt, A., “The influence of zinc on friction-wear performance of powder metal brake friction materials”, Journal of the Faculty of Engineering and Architecture of Gazi University, 21, 1, 115-121, 2006.
• Berek, S., “Effects of quartz and diatomite contributions on the bronze linings wear properties”, Master's thesis, Sakarya University Institute of Science and Technology, Sakarya, 2010.
• Albayrak, B., “Production of bronze linings and performance tests”, Master's thesis, Sakarya University Institute of Science and Technology, Sakarya, 2009.
• Singaravelu, L., “Development of frıctıon materıals through powder metallurgy”, Doctoral Thesis, Indian Instıtute of Technology Roorke, 2007.
• Leonardi, M., Alemani, M., Straffelini, G., Gialanella, S., “A pin-on-disc study on the dry sliding behavior of a Cu-free friction material containing different types of natural graphite”, Wear, 442-443, 2020.
• Wahlström, J., Söderberg, A., Olander, L., Jansson, A., Olofsson, U., “A pin-on-disc simulation of airborne wear particles from disc brakes”, Wear, 268, 5-6, pp. 769-769, 2010.
• Wojciechowski, A., Gołowicz, A., Michalski, R., “Influence of the form of copper in the friction material of disc brakes on the coefficient of friction and wear in rig tests”, The Archives of Automotive Engineering – Archiwum Motoryzacji, 62, 4, 77–88, 2013.