Experimental investigation of coating in a diesel engine for improved exhaust emissions and performance
Experimental investigation of coating in a diesel engine for improved exhaust emissions and performance
In this study, adiabatic property was brought to a 4-cylinder natural aspirated, direct injection diesel engine. For this purpose, cylinder liner, piston upper surface and valves were coated with powder with boron. Solid-boronizing method and plasma spray method were used as coating method. While cylinder liner and valves were coated with the layer of Fe2B in the thickness of 150 micron by using solid boronizing method, piston upper surface was coated with the layer of CoNiCrAlYttra +NiCrBSi in the thickness of 300 micron by using plasma spray method. After the coating process, the engine was subject to performance and emission tests. ASTM-D-2 fuel was used as test fuel. As a result of tests, while BSFC value of coated engine decreased at the rate of 7.5% and BSEC value decreased at the rate of 7% and at the rate of 15% in EGT value. While a decrease was observed at the rate of 10% in CO value, 47% in HC value, and 14% in Smoke value, an increase was observed at the rate of 35% in NOx value.
___
- Miyairi Y. "Computer simulation of an LHR DI Diesel engine." SAE Paper No, 880187, 1989.
- Schwarz E, Reid M, Bryzik W, E. Danielson. "Combustion and Performance Characteristics of a Low Heat Rejection Engine", SAE Paper No, 930988, 1993.
- Hazar H, Ozturk U. "The effects of Al2O3-TiO2 coating in a diesel engine on performance and emission of corn oilmethyl ester." Renewable Energy 2010;35:2211-6.
- Mohamed Musthafa M, Sivapirakasam S, Udayakumar M. "Comparative studies on fly ash coated low heat rejection diesel engine on performance and emission characteristics fuel edbyricebran and pongamia methyl ester and their blend with diesel. Energy 2011;36:2343-51.
- Rajendra Prasath B, Tamilporai P, Shabir MF. "Analysis of combustion, performance and emission characteristics of low heat rejection engine using biodiesel". Internatıonal Journal of Thermal Scıences. 2010;49:2483-90.
- Karthikeyan B, Srithar K. "Performance characteristics of a glowplugassisted low heat rejection diesel engine using ethanol"Applied Energy. 2011;88:323- 329.
- Hazar H. "Cotton methyl ester usage in a diesel engine equipped with insulated combustion chamber." Applied Energy 2010;87:134 -40.
- Mohamedmusthafa M, Sivapirakasam S, Udayakumar M, Balasubramanian K. "Effects of Al2O3 coating on diesel engine performance, combustion, and emission characteristics fuel edbypongamia methyl ester and its blends with diesel." Environmental Progress&SustainableEnergy. 2012;31:147-56.
- Haşimoğlu C, Ciniviz M, Ozsert İ, İçingur Y, Parlak A, Salman MC. "Performance characteristics of a low heat rejection diesel engine operating with biodiesel." Renewable Energy. 2008;33:1709-15.
- Parlak A, Sahin B, Yasar H. "Perfornance optimisation of an irreversible dual cycle with respect to pressure ratio and temperatureratio - experimentalresults of a ceramic coated IDI Diesel engine." Energy Conversion &Management. 2004;45:1219 -32.
- Karabektas M. " The effects of turbocharger on the performance and exhaust emissions of a diesel engine fuelled with biodiesel". Renewable Energy 2009;34:989 -93.
- Modi A, Gosai D. "Experimental study on thermal barrier coated diesel engine performance with blends of diesel and palm biodiesel". SAE Int J Fuel Lubricants 2010;3:246-59.
- Raheman H, Ghade SV. "Performance of compression ignition engine with Mahua (Madhucaindica) biodiesel. Fuel 2007;86:2568 -73.
- Sukumar Puhana, N. Vedaramana, Boppana V.B. Rama, G. Sankarnarayananb, K. Jeychandranb "Mahuaoil (MadhucaIndicaseedoil) methyl ester as biodiesel-preparation and emission characterstics" Biomassand Bioenergy. 28;2005:87-93.
- Başlangıç: 2012
- Yayıncı: Murat CİNİVİZ