Isbah ESTATEYIEH, Semra ARSLAN SELÇUK

12455

INTEGRATED DIGITAL DESIGN AND FABRICATION STRATEGIES FOR COMPLEX STRUCTURES: RE-EXPERIENCING WOOD JOINERY IN ARCHITECTURE

INTEGRATED DIGITAL DESIGN AND FABRICATION STRATEGIES FOR COMPLEX STRUCTURES: RE-EXPERIENCING WOOD JOINERY IN ARCHITECTURE

Throughout the history of architecture, the developments in material technologies and related fabrica=on techniques have played important roles in the design and construc=on process of a building. Human being has aoempted to create spaces to meet sheltering needs and while crea=ng spaces he has used and formed materials around him. Wood was one of the appropriate materials that was not only economic and aesthe=c, but also strong in tension, compression and bending, allowing triangulated space-frames or trusses and can=levered structures, etc. In this context, this research aoempts to understand the rela=onship between complex wooden structures in architecture and digital fabrica=on of wood joinery. By studying and analyzing selected case studies, the ar=cle will address the following ques=ons: What are the changes that have occurred in architectural design and fabrica=on of wood joinery due to the use of computa=onal design and digital fabrica=on technologies? How can wood serve architects in “materializing the complexity” of this era? Furthermore, the importance of re-searching new tectonics and materializa=on technologies while re-thinking of wood as a “new material” in architecture is discussed through the selected examples.
Keywords:

Computa=onal Design and Fabrica=on Wooden architecture, Wood joinery,

PDF

___

  • AMERICAN INSTITUTE OF TIMBER, C. 2012. Timber Construc=on Manual (6), Somerset, US, Wiley.
  • ANTEMANN, M. 2014. Seven Storey Office Building in Zurich. Detail Magazine, 2, 174-178.
  • BEORKREM, C. 2013. Material strategies in digital fabrica=on, New York, Routledge.
  • BLUMER-LEHMANN AG. 2014. Available: hop://www.detail-online.com/inspira=on/technology-seven-storey- wood-office-building-in-zurich-108958.html [Accessed 14 March 2016].
  • BOCANEGRA, A. J. L., VENA, A. R., BLANCA, I. D. S. D. L. & LAMA, J. P. D. 2014. Innova=on in Timber Architectural Structures and Digital Fabrica=on: A Cartography. Paper presented at the Fab10, Barcelona. hops:// www.fab10.org/en/papers/115
  • BOOTH, P. 2009. Digital Materiality: emergent computa=onal fabrica=on. Paper presented at the ANZAScA 2009: Performa=ve Ecologies in the Built Environment: Sustainability Research across Disciplines, School of Architecture and Design, University of Tasmania, Launceston, Australia.
  • CABRINHA, M. 2012. SG2012 GRIDSHELL [Online]. Available: hop://matsysdesign.com/2012/04/13/sg2012- gridshell/ [Accessed 18 April 2016].
  • ERMAN, E. 1999. A Survey on Structural Timber Joint ClassiŞca=ons and a Proposal Taxonomy. Architectural Science Review, 42, 169-180.
  • GERNER, M. 1992. Handwerkliche Holzverbindungen der Zimmerer, Dt. Verlag-Anst.
  • GRAUBNER, W. 1992. Encyclopedia of wood joints, Newtown, CT, Taunton Press.
  • HARDING, J., PEARSON, W., LEWIS, H. & MELVILLE, S. 2015. The Ongreening Pavilion. In: BLOCK, P., KNIPPERS, J., MITRA, J. N. & WANG, W. (eds.) Advances in Architectural Geometry 2014. Cham: Springer Interna=onal Publishing.
  • INSTITUTE FOR COMPUTATIONAL DESIGN. 2011. ICD/ITKE Research Pavilion 2011 [Online]. Available: hop:// icd.uni-stuogart.de/?p=6553 [Accessed 5 April 2015.
  • JESKA, S., PASCHA, K. S. & HASCHER, R. 2014. Emergent Timber Technologies, Boston Birkhäuser.
  • KENGO KUMA AND ASSOCIATES. n.d. Available: hop://kkaa.co.jp/works/architecture/cidori/ [Accessed 25 April 2016].
  • KESKISARJA , E., TYNKKYNEN , P., CROLLA , K. & DELAGRANGE , S. 2012. Dragon Skin Pavilion [Online]. Available: hop://www.archdaily.com/215249/dragon-skin-pavilion-emmi-keskisarja-pekka-tynkkynen-lead.
  • KOLB, J., LIGNUM & DEUTSCHE GESELLSCHAFT FÜR, H. 2008. Systems in =mber engineering : loadbearing structures and component layers, Basel; Boston, Birkhäuser.
  • KRIEG, O. D., DIERICHS, K., REICHERT, S., SCHWINN, T. & MENGES, A. Performa=ve Architectural Morphology: Robo=cally manufactured biomime=c Şnger-joined plate structures. In: CONFERENCE ON EDUCATION IN COMPUTER AIDED ARCHITECTURAL DESIGN IN, E., ZUPANCóICó-STROJAN, T., JUVANCóICó, M., VEROVSóEK, S. P. & JUTRAZó, A., eds. Respec=ng Fragile Places 29th eCAADe Conference, 2011 University of Ljubljana, Faculty of Architecture (Slovenia). eCAADe, Educa=on and Research in Computer Aided Architectural Design in Europe, 573-580.
  • LABORATORY FOR TIMBER CONSTRUCTION IBOIS. 2012. Modular Timber Structure [Online]. Available: hop:// ibois.epfl.ch/page-105527-en.html [Accessed 12 December 2015].
  • LARSEN, O. P. 2008. Reciprocal frame architecture, Oxford, Architectural Press.
  • MANAHL, M., STAVRIC, M. & WILTSCHE, A. 2012. Ornamental discre=sa=on of free-form surfaces: Developing digital tools to integrate design ra=onalisa=on with the form Şnding process. Interna=onal Journal of Architectural Compu=ng, 10, 595-612.
  • MARGARETHA, E. 2013. Stylised Silhoueoe: Motorway Church Siegerland [Online]. Available: hop:// www.detail-online.com/ar=cle/stylised-silhoueoe-motorway-church-siegerland-16553/ [Accessed April 19 2016].
  • MATSYS DESIGN. 2012. SG2012 Gridshell [Online]. Available: hop://matsysdesign.com/2012/04/13/sg2012- gridshell/ [Accessed April 2016.
  • MENGES, A. 2010. Kerf-based complex wood system [Online]. Available: hop://www.achimmenges.net/? p=5006 [Accessed 19 April 2016].
  • MENGES, A. 2014. Landesgartenschau Exhibi=on Hall [Online]. Available: hop://www.achimmenges.net/? p=5731 [Accessed 13 December 2015].
  • MESSLER, R. W. 2011. Integral Mechanical Aoachment, Burlington, US, Buoerworth-Heinemann.
  • MILLER, H. 2015. Japanese Wood Cravmanship. Available: hop://www.wcmt.org.uk/sites/default/Şles/report- documents/Miller%20H%20Report%202015%20Final.pdf.
  • MIT ARCHITECTURE. 2012. MIT Kerf Pavilion [Online]. Available: hops://architecture.mit.edu/architectural- design/project/kerf-pavilion [Accessed April 2016].
  • MOòNCK, W. 1985. Holzbau, Berlin, Verlag für Bauwesen.
  • NABAEI, S. S. & WEINAND, Y. 2011. Geometrical Descrip=on and Structural Analysis of a Modular Timber Structure. Interna=onal Journal of Space Structures, 26, 321-330.
  • O’BRIEN, M. 2000. The Five Ages of Wood.
  • RAMBOLL COMPUTATIONAL DESIGN. 2014. Ongreening Pavilion [Online]. Available: hop:// formatengineers.com/projects/on-greening-pavilion.html.
  • REICHERT, S., SCHWINN, T., LA MAGNA, R., WAIMER, F., KNIPPERS, J. & MENGES, A. 2014. Fibrous structures: an integra=ve approach to design computa=on, simula=on and fabrica=on for lightweight, glass and carbon Şbre composite structures in architecture based on biomime=c design principles. Computer-Aided Design, 52, 27-39. ROBELLER, C. & WEINAND, Y. 2015. Interlocking Folded Plate–Integral Mechanical Aoachment for Structural Wood Panels. Interna=onal Journal of Space Structures, 30, 111-122.
  • SAHU, S. & WANG, Y. 2015. AA Design & Make Biomass Boiler House [Online]. Available: hop://issuu.com/ aaschool/docs/aa_design___make_-_biomass_boiler_h.
  • SCHIFFER, H. 2013. Motorway Church Siegerland [Online]. Available: hop://www.detail-online.com/ar=cle/ stylised-silhoueoe-motorway-church-siegerland-16553/ [Accessed 19 April 2016].
  • SHIGERU BAN ARCHITECTS. 2013. Tamedia Office Building [Online]. Available: hop://www.archdaily.com/ 478633/tamedia-office-building-shigeru-ban-architects [Accessed 15 April 2016].
  • SHIMEK, H., DOMINGUEZ, E., WILTSCHE, A. & MANAHL, M. Sewing Timber Panels: An Innova=ve Digitally Supported Joint System for Self-supported Timber Plate Structures. In: FISCHER, T., DE BISWAS, K., HAM, J., NAKA, R. & HUANG, W., eds. Proceedings of the 17th Interna=onal Conference on Computer-Aided Architectural Design Research in Asia, 2012 Hong Kong. Associa=on for Computer-Aided Architectural Design Research in Asia (CAADRIA), 213–222.
  • TAMKE, M., RIIBER, J. & JUNGJOHANN, H. Generated Lamella. In: SPRECHER, A., YESHAYAHU, S. & LORENZO- EIROA, P., eds. LIFE in:forma=on, On Responsive Informa=on and Varia=ons in Architecture: Proceedings of the 30th Annual Conference of the Associa=on for Computer Aided Design in Architecture (ACADIA), 10/2010 2010 New York. Cooper Union, Prao Ins=tute, 340-347.
  • TAMKE, M. & THOMSEN, M. R. Digital wood crav. In: TIDAFI, T. & DORTA, T., eds. Joining Languages, Cultures and Visions: Proceedings of the 13th Interna=onal CAAD Futures Conference, 2009 Montréal, Canada. Les Presses de l'Université de Montréal, 673-686.
  • TYNKKYNEN, P. 2012. Dragon Skin Pavilion [Online]. Available: hop://www.archdaily.com/215249/dragon-skin- pavilion-emmi-keskisarja-pekka-tynkkynen-lead [Accessed 12 December 2015].
  • ZWERGER, K. 2012. Wood and Wood Joints : Building Tradi=ons of Europe, Japan and China, Basel, Birkhäuser
International Journal of Architecture and Urban Studies-Cover
  • ISSN: 2147-9836
  • Başlangıç: 2016
  • Yayıncı: Bilsas Bilim Sanat Spor Yapım
Arşiv
Sayıdaki Diğer Makaleler

BIOMIMETIC DESIGN PRINCIPLES AS AN INSPIRATIONAL MODEL: CASE STUDY ON URBAN FURNITURE

Ujal ABBASLI, Semra ARSLAN SELCUK

A PROPOSAL FOR THE NEW SCIENCE CENTRE IN NAPLES: A “GREENHOUSE” IN THE LANDSCAPE

Pasquale MIANO, Adrıana BERNIERI

THE DESIGN OF ARCHITECTURAL SPACE THROUGH SYSTEMS OF NATURE

Lılıana Eneıda Sánchez PLATAS, Jesús Sánchez LUQUEÑO

TREE METAPHOR IN ARCHITECTURAL DESIGN

Nur Banu ÖZDEMİR, Semra Arslan SELÇUK

INTEGRATED DIGITAL DESIGN AND FABRICATION STRATEGIES FOR COMPLEX STRUCTURES: RE-EXPERIENCING WOOD JOINERY IN ARCHITECTURE

Isbah ESTATEYIEH, Semra ARSLAN SELÇUK

THE POWER AND NATURE: THE RESISTANT SUBVERSIONS

Serdar ERİŞEN