___

• [1] Çoşkun, G., 2013. Karbonat Kökenli Bazı Doğal Taşlarda Yüzey İşleme Tekniklerinin ve Pürüzlülüğün Kayma Direncine Etkileri. Doktora Tezi., Eskişehir Osmangazi Üniversitesi,Fen Bilimleri Enstitüsü, 293,2013.[2] Grönqvist, R., 1995. Mechanisms of friction and assessment of slip resistance of new and used footwear sales on contaminated metals. Ergonomics, 38, 224–41.[3] Kim, I.J., 1996. Microscopic investigation to analyze the slip resistance of shoes. Proceedings of the Fourth Pan Pacific Conference on Occupational Ergonomics, November. Taiwan, ROC, 68–73.[4] Rowland, F. J., Jones, C., Manning, D. P., 1996. Surface roughness of footwear soling materials: Relevance to slip resistance. Journal of Testing and Evaluation, 24 (6), 368–376. http://dx.doi.org/ 10.1520/JTE11459J.[5] Manning, D.P., Jones, C., Rowland, F.J., Roff, M., 1998. The surface roughness of a rubber soling material determines the coefficient of friction on water lubricated surfaces. Journal of Safety Research, 29, 275–283.[6] Chang, W.R., 1999. The effect of surface roughness on the measurement of slip resistance”, International Journal of Industrial Ergonomics, 24, 299-313. [7] Kim, I.J., 2001. Microscopic observations of the progressive wear on shoe surfaces that affect the slip resistance characteristics. International Journal of Industrial Ergonomics, 28, 17‐29.[8] Grönqvist R., Hirvonen M., Tohv A., 1999. Evaluation of three portable floor slipperiness testers. International Journal of Industrial Ergonomics 25, 85–95.[9] Leclercq S., 1999. The prevention of slipping accidents: a review and discussion of work related to the methodology of measuring slip resistance. Safety Science, 31, 95–125. http://dx.doi.org/ 10.1016/S0925‐7535(98)00064‐2 [10] Powers, C. M., Kulig, K., Flynn, J., Brault, J. R., 1999. Repeatability and bias of two walkway safety tribometers. Journal of Testing and Evaluation 27(6): 368–374.[11] Chang, WR., Matz, S., 2001. The slip resistance of common footwear materials measured with two slipmeters. Applied Ergonomics 32(6): 540–558.[12] Sarıışık, A., 2009. Safety analysis of slipping barefoot on marble covered wet areas. Safety Science 47(10): 417–1428. [13] Sarıışık, A, Sarıışık, G., 2010. Analysis of the parameters affecting the slip angle of surface‐processed natural stones. Mining Journal 49(1): 17–30 (in Turkish).[14] Sarıışık, A., Akdaş, H., Sarıışık, G., Çoşkun, G., 2011. Slip Safety Analysis of Differently Surface Processed Dimension Marbles. Journal of Testing and Evaluation, Vol. 39, No. 5.[15] Sarıışık, A., Sarıışık, G., Akdaş, H., 2012. Slip Analysis of Surface Processed Limestones, Proceedings of the Institution of Civil Engineers ‐ Construction Materials, Volume: 165, Issue: 5, 279 –296.[16] Bowman, R., 2003; “Slip Resistance Ignorance: A Recipe for Costly Falls”, www.infotile.com/tiletoday/issues/pdf/40article.pdf[17] Carpenter J, Lazarus D and Perkins C (2006) Safer Surfaces to Walk on Reducing the Risk of Slipping. Construction Industry Research and Information Association, London, UK, pp. 45–57.