A.emre CENGİZ, Yücel GÜNEY

7178

Yapı Projelerinin Yönetiminde Coğrafi Bilgi Sistemleri (CBS) Uygulamaları

Günümüz modern kentlerinin inşasında önemli bir rol üstlenen inşaat mühendisliği birçok anabilim dalını bünyesinde barındırmaktadır. Bu anabilim dallarından biri olan yapı yönetimi; inşaat projelerinin uygulama aşamalarında yürütülen faaliyetler arasındaki koordinasyon ve kontrolün sağlanmasını kapsamaktadır. Bu faaliyetlerin yürütülmesi bir inşaat projesinde görev alan birimler ve bireyler arasındaki bilgi akışı ile birebir ilişkilidir. Bu nedenle inşaat projelerinin yönetim sürecinde bilgi teknolojilerinin kullanılması son derece önemlidir. Bilgi teknolojilerinin bir parçası olan Coğrafi Bilgi Sistemleri (CBS), inşaat projelerinin özellikle konumsal problemlerine etkin çözümler sunmaktadır. CBS'nin bu yönünün keşfedilmesi yapı yönetimi alanında kullanım olanaklarının araştırılmasına neden olmuştur. Bu çalışmada, dünyanın çeşitli ülkelerinde gerçekleştirilen CBS tabanlı yapı yönetimi uygulamaları ve bu çalışmaların yapı yönetim sürecine sağladığı katkılar konu alınmıştır. Çalışmanın amacı, ülkemizde hala geleneksel yöntemlerin kullanıldığı yapı yönetimine CBS'nin kullanımını önererek yenilikçi bir bakış açısı getirmektir. Yapı yönetimi alanında yapılan CBS uygulamalarının derlendiği bu çalışma, ileriki çalışmalara bir başlangıç niteliği taşımaktadır.
Anahtar Kelimeler:

Yapı Yönetimi, Bilgi Teknolojileri, CBS

Geographic Information System (GIS) Applications in Management of Construction Projects

Civil engineering that has a significant role on construction of today's modern cities contains several sub-specializations. Construction management, one of these sub-specializations, includes coordination and control of operations that are conducted during the construction projects. Conducting these operations is related to the data flow between units and individuals that are involved a construction project. Thus, it is significant to use of information technologies during the construction project management. Geographic Information System (GIS) that is one part of the information technologies can offer efficient solutions to mostly spatial problems of construction projects. Coming to light of this feature of GIS caused researches about utilization possibilities of GIS in construction management. In this study, GIS based construction management applications that were performed in the several country of the world and contributions of these studies to the construction management process were discussed. The goal of the study that is offered the use of GIS in construction management is bringing a new perspective to construction management that is still applied with the traditional methodologies in our country. This study that is a review of GIS based construction management applications has the characteristics of an inception for the further studies.
Keywords:

-,

PDF

___

  • Walker, A., “Project Management in Construction”, Blackwell Publishing, Fifth Edition, İngiltere, 2007.
  • McGeorge, D., Palmar, A., “Construction Management New Directions”, Blackwell Publishing, Second Edition, İngiltere, 2007. 3. ESRI, 2005. “ArcGIS solutions for civil engineering.” http://www.esri.com/library/brochures/pdfs/arcgis-civil engineering.pdf (15.09.2011)
  • Cheng, M.Y., Yang, C.Y., 2001, “GIS-based cost estimates integrated with material layout planning.” Journal of Construction Engineering and Management, 127(4), 291-299.
  • Sun, W., Hasell, M.J., 2002, “Exploring a GIS prototype to improve the management of the architectural design, engineering and construction building product process.” Proc. Environment Science http://proceedings.esri.com/library/userconf/proc02/pap0212/p0212.htm (18.09.2011). Research Institute (ESRI) Conference,
  • Oloufa, A.R., Eltahan, A.A., Papacostas, C.S., 1994, “Integrated GIS for construction site investigation.” Journal of Construction Engineering and Management, 120 (1), 211-222.
  • Varghese, K., O‟Connor, J.T., 1995, “Routing large vehicles on industrial construction site.” Journal of Construction Engineering and Management, 121(1), 1-12.
  • Sebt, M.H., Karan, E.P., Delavar, M.R., 2008, “Potential Application of GIS to Layout of Construction Temporary Facilities”, International Journal of Civil Engineering, 6, 235-245.
  • Cheng, M.Y., O‟Connor, J.T., 1996, “ArcSite: Enhanced GIS for construction site layout.” Journal of Construction Engineering and Management, 122 (4), 329-336.
  • Li, H., Kong, C.W., Pang, Y.C., Shi, W.Z., Yu, L., 2003, “Internet-based geographic information systems system for E-commerce application in construction material procurement.” Journal of Construction Engineering and Management, 129 (6), 689-697.
  • Bansal, V.K., Pal, M., 2008, “Generating, evaluating, and visualizing construction schedule with Geographic Information Systems.” Journal of Computing in Civil Engineering, ASCE, 22(4). 233- 242.
  • Bansal, V.K., Pal, M., 2009, “Extended GIS for construction engineering by adding direct sunlight visualisations on buildings.” Construction Innovation, 9(4), 406-419.
  • Bansal, V.K., Pal, M., 2009, “Construction schedule review in GIS with a navigable 3D animation of project activities.” International Journal of Project Management, 27, 532–54.
  • Li, H., Chen, Z., Yong, L., Kong, S.C.W., 2005, “Application of integrated GPS and GIS technology for reducing construction waste and improving construction efficiency.” Automation in Construction, 14(3), 323-331.
  • Bansal, V.K., Pal, M., 2007, “Potential of geographic information systems in building cost estimation and visualization”, Automation in Construction, 16, 311–322.
  • Bansal, V.K., 2011, “Application of Geographic Information Systems in Construction Safety Planning”, International Journal of Project Management, 29(1), 66-77.
  • Bansal, V.K., Pal, M., 2006, “GIS based projects information system for construction management.” Asian Journal of Civil Engineering (Building and Housing), 7(2), 115-124.
  • Driscoll, F.G., 1986, “Groundwater and Wells”, İkinci baskı, Johnson Division, St.Paul, Minnesota.
  • Cheng, M.Y., Chang, G.L., 2001, “Automating utility route design and planning through GIS” Automation in Construction, 10(4), 507-516
  • Cheng, M.Y., O‟Connor, J.T., 1994, “Site layout of construction temporary facility using enhanced- Geographic Information System (GIS)” Automation in Construction, 3, 11-19.
  • Hegazy, T., Elbeltagi, E., 1999, „„EvoSite: Evolution-based model for site layout planning‟‟, Journal of Computing in Civil Engineering, ASCE, 13(3), 198–206.
  • Rahman, A.A., Pilouk, M., “Spatial Data Modelling for 3D GIS”, Springer, New York, ABD, 2008.
  • Ford, A., 2004, “The visualisation of integrated 3D petroleum datasets in ArcGIS.” 24th ESRI User Cconference, San Diego, 1-11.
  • Ekberg, F., 2007, “An approach for representing complex 3D objects in GIS applied to 3D properties.” Thesis for Master of Geomatics, Department of Technology and Built Environment, University of Gävle, Sweden. 25. ESRI, 2008, “The Multipatch Geometry Type”, White Paper, http://www.esri.com/library/whitepapers/pdfs/multipatch-geometry-type.pdf (06.10.2011).
  • Bansal, V.K., Pal, M., 2006, “Geographic Information Systems for Construction Industry: A methodology to generate 3-D view of buildings”, Geoenseñanza, 11, 17-28.
  • Zhong, D., Li, J., Zhu, H., Song, L. 2004, “Geographic information system based visual simulation methodology and its application in concrete dam construction processes.” Journal of Construction Engineering and Management, 130 (5), 742-750.
  • Poku, S.E., Arditi, D., 2006, “Construction scheduling and process control using geographic information systems.” Journal of Computing in Civil Engineering, 20 (5), 351-360
  • Bansal, V.K., (2008), “Geographic Information System in Construction Management”, Doctor of Philosophy, Department of Civil Engineering, India
  • Kolagotla, V., 2009, “Geographical Information System And Its Application To Project Management In Construction Industry”, Symposium of Map Asia, India.
  • Cheng, M.Y., Chen, J.C., 2002, “Integrating barcode and GIS for monitoring construction progress.” Automation in Construction, 11(1), 23-33.
  • Li, H., Chen, Z., Yong, L., Kong, S.C.W., 2005, “Application of integrated GPS and GIS technology for reducing construction waste and improving construction efficiency.” Automation in Construction, 14(3), 323-331.
  • Salminen, S., 1995, “Serious occupational accidents in the construction industry”, Construction Management Economics, 13, 299-306.
  • Jia, N., Xie, M., Chai, X., “Development and Implementation of a GIS-Based Safety Monitoring System for Hydropower Station Construction”, Journal of Computing in Civil Engineering, kabul tarihi: 12.01.2011, ASCE.
  • Bansal, V.K., 2011, “Application of Geographic Information Systems in Construction Safety Planning”, International Journal of Project Management, 29(1), 66-77.
  • Atay, H., Ergen, E., Toz, G., 2010, “GIS based decision support system for health and safety management in linear projects”, Proceedings of the International Conference on Computing in Civil and Building Engineering, UK.
  • Manase, D., Heesom, D., Oloke, D., Proverbs, D., Young, C., Luckhurst, D., 2011, “A GIS analytical approach for exploiting construction health and safety information”, Journal of Information Technology in Construction, 16, 335-356.
Harita Teknolojileri Elektronik Dergisi-Cover
  • Başlangıç: 2009
  • Yayıncı: Prof.Dr. Süleyman TAŞGETİREN
Arşiv
Sayıdaki Diğer Makaleler

Yapı Projelerinin Yönetiminde Coğrafi Bilgi Sistemleri (CBS) Uygulamaları

A.emre CENGİZ, Yücel GÜNEY

Vakıf Bilgi Sisteminin Tasarlanması ve Gerçekleştirimi: Samsun Örneği

Faik Ahmet SESLİ, Halil AKINCI, Halit FAZLA

Dijital Fotogrametri Teknikleri İle Kişi Tanıma

Abdullah VARLIK, Özşen ÇORUMLUOĞLU