Bending Strength of Screwed Corner Joints with Different Materials
Tests were carried out in order to determine the bending strength with compression and tension force with and without glue in addition to screws on furniture corner joints in a construction case. The specimens were prepared with particleboard and medium density fiberboard (MDF) surfaced with a synthetic resin sheet. In the connection, two types of screws which have dimensions of 4/50 mm and 5/60 mm were used. For the glued joints, polyurethane Desmodur-VTKA adhesive was used. As a result of these tests it has been determined that the joints with glue are better than the ones without glue and the strength of fiberboard is better than particleboard. Keywords: Bending strength, compression test, tension test, particleboard, wood testing, screws.
Keywords:
Bending strength, compression test tension test, particleboard, wood testing, screws,
___
- Hill, M.D., Eckelman, C.A., “Flexibility and bending strength of mortise and tenon joints”, Furniture Design & Manufacturing magazine, 25- 33 (1973).
- Eckelman, C.A., “Which screw holds best?” Furniture Design & Manufacturing, magazine 25- 26 (1974).
- Zhang, J.L., Eckelman, C.A., “The bending moment resistance of single-dowel corner joints in case construction”, Forest Products J, 43(6): 19-24 (1993).
- Zhang, J.L., Eckelman, C.A., “Rational design of multi-dowel corner joints in case construction”, Forest Products J, 43(11/12): 52-58 (1993).
- Eckelman, C.A., Lin, F.C., “Bending strength of corner joints constructed with injection-molded splines”, Forest Product J , 47(4): 89-92 (1997).
- Efe, H., “Withdrawal strength of screws on woods plates were using funiture industry”, Master thesis, Gazi University, Journal of Scienece Knowledge Institute, Ankara, 12-16 (1992).
- Efe, H., Kasal, A., Tension strength of case construction with and without demontable corner joints. Industrial Architecture Journal of Faculty of Education Ankara, 8(8): 61-74 (2000).
- Daudeville, L., Davenne, L., Yasumura, M., “Prediction of the load carrying capacity of bolted timber joints”, Wood Science and Technology, 33: 15-29 (1999).
- Jensen, J.L., Koizumi, A., Sasaki, T., Tamura, Y., Iijima, Y., “Axially loaded glued-in hardwood dowels”, Wood Science and Technology, 35: 73- 83 (2001).
- Barr, B.I.G., Abusiaf, H.F., Şener, S., “Size effect and fracture energy studies using compact compression specimens”, RILEM Materials and Structures, 31: 36-41 (1998).
- Fibre building boards-hard and medium boards (1982) Turkish Code of Practice TS 64.
- Fiberboards and particleboards surfaced with synthetic resin (1974) Turkish Code of Practice TS 1770.
- Yayın Aralığı: Yılda 4 Sayı
- Başlangıç: 1988
- Yayıncı: Gazi Üniversitesi, Fen Bilimleri Enstitüsü