Examination of Zinc Electrode Performance in Microbial Fuel Cells
Microbial fuel cells are one of the systems of renewable and clean energy generating. One of the most important things in microbial fuel cells is bacterial growth. Composts rich in organic substances are commonly used in microbial fuel cells because they positively affect bacterial growth. In addition, in recent years, studies on the use of non-inert (metal etc.) electrodes have increased; while inert (usually carbon based etc.) electrodes are generally used in microbial fuel cells. The objective of this study is to evaluate zinc anode performance by using microbial fuel cells mixed with compost. Experiments were carried out in microbial fuel cell equipped with zinc anode electrode and graphite cathode electrode. According to experiments, zinc is a suitable anode electrode of that utilizes electrochemical and biochemical reactions and therefore the microbial fuel cell produces high power density (5.33 W/m2). Zinc, which has a good electrochemical and biochemical performance, undergoes corrosion. But, according to measurements and calculations made on the basis of literature the anode zinc electrode used in this study is located in the category of corrosion-resistant material. The zinc anode for microbial fuel cells is the promising electrode technology. The experiments; the microbial fuel cell in this study, electrolyte, electrode, biofuel source, biocatalyst, etc. shows that the parameters work in harmony.
___
- Ersan, K., Ar, I., Tukek, S. “Effect of Humidification of Gases on First Home Constructed PEM Fuel Cell Stack Potential”, Gazi University Journal of Science, 23(1), 61-69, (2010).
- Çek, N. “Parçacıklar ve Enerji Kaynakları”, Lambert Academic Publishing, Saarbrucken, Germany, (2016).
- Çek, N. “Biofuel cell design with moss”, 10th International Clean Energy Symposium, Istanbul, Turkey, pp. 182-193, (2016).
- Zhao, Y., Collum, S., Phelan, M., Goodbody, T., Doherty, L., Hu, Y. “Preliminary investigation of constructed wetland incorporating microbial fuel cell: Batch and continuous flow trials”, Chemical Engineering Journal. 229, 364-370, (2013).
- Das, M.P. “Bioelectricity production using algae in microbial fuel cell”. Der Pharma Chemica, 7(11), 8-10, (2015).
- Khudzari, J.M., Tartakovsky, B., Raghavan, G.S.V. “Effect of C/N ratio and salinity on power generation in compost microbial fuel cells”, Waste Management, 48, 135-142, (2016).
- Moqsud, M.A., Yoshitake, J., Bushra, Q.S., Hyodo, M., Omine, K., Strik, D. “Compost in plant microbial fuel cell for bioelectricity generation”, Waste Management, 36, 63-69, (2015).
- Madan, G. “S.Chands Success Guide (Q&A) Inorganic Chemistry”, S. Chand Publishing, Delhi, India, (2005).
- Chu, H., Lin, X., Fujii, T., Morimoto, S., Yagi, K., Hu, J., Zhang, J. “Soil microbial biomass, dehydrogenase activity, bacterial community structure in response to long-term fertilizer management”, Soil Biology&Biochemistry, 39, 2971-2976, (2007).
- Khan, N., Clark, I., Bolan, N., Meier, S., Saint, C.P., Sánchez-Monedero, M.A., Shea, S., Lehmann, J., Qiu, R. “Development of a buried bag technique to study biochars incorporated in a compost or composting medium” Journal of Soils Sediments. 17:656-664, (2017).
- Karra, U., Manickam, S. S., McCutcheon, J. R., Patel, N., Li, B. “Power generation and organics removal from wastewater using activated carbon nanofiber (ACNF) microbial fuel cells (MFCs)”, International Journal of Hydrogen Energy, 38, 1588-1597, (2013).
- Zuo, R. “Biofilms: strategies for metal corrosion inhibition employing microorganisms”, Applied Microbiology and Biotechnology, 76, 1245-1253, (2007).
- Yu, Z., Zhang, J., Zhao, X., Zhao, X., Duan, J., Song, X. “Effects of Microorganism on Corrosion Performance of Zinc in Natural Seawater”, International Journal of Electrochemical Science, 9, 7587-7595, (2014).
- Juzeliunas, E., Ramanauskas, R., Lugauskas, A., Leinartas, K., Samulevicene, M., Sudavicius, A. “Influence of wild strain Bacillus mycoides on metals: From corrosion acceleration to environmentally friendly protection”, Electrochimica Acta, 51, 6085-6090, (2006).
- Maruthamuthu, S., Nagendran, T., Anandkumar, B., Karthikeyan, M.S., Palaniswamy, N., Narayanan, G. “Microbiologically influenced corrosion on rails”, Current Science, 100, 870-881, (2011).
- Ammal, P.R., Prajila, M., Joseph, A. “Physicochemical studies on the inhibitive properties of a 1,2,4-triazole Schiff’s base, HMATD, on the corrosion of mild steel in hydrochloric acid”, Egyptian Journal of Petroleum, (2017) (in press).
- Tribak, Z., Haoudi, A., Skalli, M.K., Rodi, Y.K., El Azzouzi, M., Aouniti, A., Hammouti, B., Senhaji, O. “5-Chloro-1H-indole-2,3-dione derivative as corrosion inhibitor for mild steel in 1M H3PO4: weight loss, electrochemical and SEM studies”, Journal of Materials and Environmental Sciences, 8, 298-309, (2017).
- Ghantous, R.M., Poyet, S., L'Hostis, V., Tran, N-C., François, R. “Effect of crack openings on carbonation-induced Corrosion”, Cement and Concrete Research, 95, 257-269, (2017).
- Biyikoğlu, A. and Alpat, C.Ö. “Parametric Study of A Single Cell Proton Exchange Membrane Fuel Cell For A Bundle of Straight Gas Channels”, Gazi University Journal of Science, 24(4), 883-899, (2011).
- Marcus, A.K., Torres, C.I., Rittmann, B.E. “Conduction-Based Modeling of the Biofilm Anode of a Microbial Fuel Cell”, Biotechnology and Bioengineering, 98(6), 1171-1182, (2007).
- Yang, J., Yang, H., Yu, H., Wang, W., Zeng, X. “Corrosion Behavior of Additive Manufactured Ti-6Al-4V Alloy in NaCl Solution”, Metallurgical and Materials Transactions A. 48:3583-3593, (2017).
- Chen, C-Y., Chen, T-Y., Chung, Y-C. “A comparison of bioelectricity in microbial fuel cells with aerobic and anaerobic anodes”, Environmental Technology, 35, 286-293, (2014).
- Du, H., Fusheng, L. “Enhancement of solid potato waste treatment by microbial fuel cell with mixed feeding of waste activated sludge”, Journal of Cleaner Production, 143, 336-344, (2017).
- Yayın Aralığı: Yılda 4 Sayı
- Başlangıç: 1988
- Yayıncı: Gazi Üniversitesi, Fen Bilimleri Enstitüsü