Investigation of Microstructure and Tribological behavior of WE43/nano B4C Composites Produced by Spark Plasma Sintering

Investigation of Microstructure and Tribological behavior of WE43/nano B4C Composites Produced by Spark Plasma Sintering

In this study, composite samples of WE43 (Mg-4Y-3RE-Zr) reinforced with nano-B4C particles in different ratios (0.5 and 2 wt.%) were prepared by spark plasma sintering (SPS). The powders were mixed in a 3-dimensional ball mill at 300 rpm. The mixed powders were then hot pressed under 35 MPa pressure at 525 °C for 6 min. XRD and FESEM-EDS instruments were used to characterize the composite samples. Microhardness and wear tests were performed to designate the mechanical properties. It was found that the highest hardness occurred in the composite sample with 2% nano-B4C composites. It was also found that tribological properties improved with the increase of nano-B4C content.

___

  • Banijamali, S. M., Palizdar, Y., Nekouee, K. A., Najafi, S., & Shariat Razavi, M. (2022). Effect of B4C reinforcement and hot rolling on microstructure and mechanical properties of WE43 magnesium matrix composite. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 236(9), 1854-1868. doi:10.1177/14644207221085939
  • Ghasali, E., Alizadeh, M., Niazmand, M., & Ebadzadeh, T. (2017a). Fabrication of magnesium-boron carbide metal matrix composite by powder metallurgy route: comparison between microwave and spark plasma sintering. Journal of Alloys and Compounds, 697, 200-207. doi:10.1016/j.jallcom.2016.12.146
  • Ghasali, E., Yazdani-rad, R., Asadian, K., & Ebadzadeh, T. (2017b). Production of Al-SiC-TiC hybrid composites using pure and 1056 aluminum powders prepared through microwave and conventional heating methods. Journal of Alloys and Compounds, 690, 512-518. doi:10.1016/j.jallcom.2016.08.145
  • Moheimani, S. K., Keshtgar, A., Khademzadeh, S., Tayebi, M., Rajaee, A., & Saboori, A. (2021). Tribological behaviour of AZ31 magnesium alloy reinforced by bimodal size B4C after precipitation hardening. Journal of Magnesium and Alloys, 10(11), 3267-3280. doi:10.1016/j.jma.2021.05.016
  • Nimityongskul, S., Jones, M., Choi, H., Lakes, R., Kou, S., & Li, X. (2010). Grain refining mechanisms in Mg–Al alloys with Al4C3 microparticles. Materials Science and Engineering: A, 527(7-8), 2104-2111. doi:10.1016/j.msea.2009.12.030
  • Saheb, N., Iqbal, Z., Khalil, A., Hakeem, A. S., Al Aqeeli, N., Laoui, T., Al-Qutub, A., & Kirchner, R. (2012). Spark plasma sintering of metals and metal matrix nanocomposites: a review. Journal of Nanomaterials, 2012, 983470. doi:10.1155/2012/983470
  • Shuai, C., He, C., Peng, S., Qi, F., Wang, G., Min, A., Yang, W., & Wang, W. (2021). Mechanical alloying of immiscible metallic systems: process, microstructure, and mechanism. Advanced Engineering Materials, 23(4), 2001098. doi:10.1002/adem.202001098
  • Tang, B., Li, J., Wang, Y., Luo, H., Ye, J., Chen, X., Chen, X., Zheng, K., & Pan, F. (2022). Mechanical properties and microstructural characteristics of Ti/WE43 composites. Vacuum, 206, 111534. doi:10.1016/j.vacuum.2022.111534
  • Taşcı, U., Gökmeşe, H., & Bostan, B (2013). AA 2014 Al Matrisli B4C Parçacık Takviyeli Kompozitlerin Mikro Yapı ve Aşınma Davranışının İncelenmesi. Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji, 1(4), 161-168.
  • Yadav, M., Kumaraswamidhas, L. A., & Singh, S. K. (2022). Investigation of solid particle erosion behavior of Al-Al2O3 and Al-ZrO2 metal matrix composites fabricated through powder metallurgy technique. Tribology International, 172, 107636. doi:10.1016/j.triboint.2022.107636
Gazi University Journal of Science Part A: Engineering and Innovation-Cover
  • Yayın Aralığı: 4
  • Başlangıç: 2013
  • Yayıncı: Gazi Üniversitesi, Fen Bilimleri Enstitüsü
Sayıdaki Diğer Makaleler

Engineering Properties of Lightweight Mortars Containing Wood Waste Particles

Niyazi Uğur KOÇKAL, Erdem ÇAMURLU

A Computational Study of the Adsorptive Separation of Methane and Hydrogen in Zeolite Templated Carbons

Celal Utku DENİZ

Effects of Different Culture Media Compositions on In Vitro Micropropagation from Paradox Walnut Rootstock Nodes

Cem DİRLİK, Hacer KANDEMİR, Nurberat ÇETİN, Senem ŞEN, Begüm GÜLER, Aynur GÜREL

Discretization of Fractional Order Operator in Delta Domain

Sujay Kumar DOLAİ, Arındam MONDAL, Prasanta SARKAR

Sample Size Estimation of Nonparametric Tests with Ordered Alternatives for Longitudinal Data in Randomized Complete Block Designs

Melike BAHÇECİTAPAR, Hatice Tül Kübra AKDUR

Investigation of Microstructure and Tribological behavior of WE43/nano B4C Composites Produced by Spark Plasma Sintering

Ufuk TAŞCI, Bulent BOSTAN

Investigation and Development of Polarographic Method for Pb (II) and Cd (II) Analyses in Oils

Şükrü KALAYCI, Sinan Mithat MUHAMMET, Bekir Sıtkı CEVRİMLİ

Comparison of Experimental and Monte Carlo Efficiencies of 0.5g/cc Epoxy Matrix Marinelli Source with Multiple Radioactive Nuclides

Gülper AKSOY, Hasan ÜNLÜ, Nilgün ORHAN, Mustafa Hicabi BÖLÜKDEMİR

Machine Learning Techniques for the Classification of IoT-Enabled Smart Irrigation Data for Agricultural Purposes

Aamo IORLİAM, Sylvester BUM, Iember S. AONDOAKAA, Iveren Blessing IORLIAM, Yahaya SHEHU

Experimental Investigation of Hydro-Mechanical Soil Properties of a Slope Failure

Seda DURUKAN, Ender BAŞARI