___

• Hens, K. F. Lee D. and German, M., “ Processing
• Conditions and Tooling for Powder Injection
• Molding”, APMI, 27(2), 141-153,1991.
• Shankar, A. ve Paul, F. W., “A Mathematical
• Model for the Evaluation of Injection Molding
• Machine Control”, J.of Dyn. Sys. Meas. and
• Control, 104, 86-92, 1982.
• Sanschagrin, B., “Process Control of Injection
• Molding “,Polymer Engineering and Science,
• (8), 431-438, 1983.
• Kamal, M.R, Patterson, W.I.., Fara, D.A. and
• Haber, A., “A study in Injection Molding
• Dynamics “, Polymer Engineering and Science,
• (9), 686-691, 1984.
• Fara, D.A., Kamal, M. R. and Patterson, W.I.,
• “Evaluation of Simple Dynamic Models and
• Controllers for Hydraulic and Nozzle Pressure in
• Injection Molding”, Polymer Engineering and
• Science, 25 (11), 714-723, 1985.
• Hens K. F., D. Lee, S. T. Lin ve R. M. German,
• , “ Modeling and Testing of Powder Injection
• Molding Process”, Modern Developments in
• PM, APMI,18, 417-429, 1988.
• Hens, K. F., Lee, D., Lin S. T. and German, R. M.,
• “ Integrity of Complex Shape Products by Powder
• Injectıon Molding “, PMI , 23(1), 15-21, 1991.
• Gaspervich, J. R., “ Practical Application of Flow
• Analysis in Metal Inj. Molding “, APMI, 27(2), p.
• -139, 1991.
• L. A. Najmi ve D. Lee, “ Modeling of the Mold
• Filling Process for Powder Injection Molding “,
• Polymer Engineering and Science, 31(15), 1137-
• , 1991.
• Chiu C.P., Shih M.C. ve Wei J.H., “Dynamic
• Modeling of the Mold Filling Process in an
• Injection Molding Machine”, Polymer
• Engineering and Science, 31(19), 1417-1425,
• -
• Aksit, M.F. ve Lee, D., “A Lumped arameter
• Analysis of Powder Injection Molding”, The Int.
• J. of Powder Metallurgy, 31(4), 351-363, 1995.
• Aksit, M. F., 1993, A Lumped Parameter
• Analysis of Powder Injection Molding, Master
• Thesis, Rensselaer Polytechnic Institute, New
• York, 1993.
• Ercan, Y., Akışkan Gücü Kontrolu Teorisi, Gazi
• Üniv. Yayın No: 206, 1995.
• Yiğit, İ., Toz Enjeksiyon Kalıplama Makinalarında
• Enjeksiyon Hızı ve Kalıp İçi Basıncı Kontrolünün
• Teorik Ve Deneysel Olarak İncelenmesi, Ph.D.
• Doktora Tezi, Gazi Üniversitesi Fen Bilimleri
• Enstitüsü, Ankara, 2000.
• Yiğit, İ., Ercan Y. ve Sarıtaş S., “Cavity Pressure
• Control of Powder Injection Molding Machines”,
• Transactions of The Instıtute Of Measurement
• And Control, 393-415, Belfast, England, 2004.