___

• Miller, W.S., Zhuang, L., Bottema, J.,
• Wittebrood, A.J., Smet, P. De, Harsler, A.,
• Vieregge, A., “Recent Development in
• Aluminium Alloys for the Automotive
• Industry”, Mater. Sci. Eng. A 280, 37–49, 2000.
• Mondolfo L.F., Aluminum Alloys: Structure
• and Properties, Boston 7 Butterworths; 1976.
• Smith, W.E., Mühendislik Alaşımlarının Yapı
• ve Özellikleri, Demir Dışı Alaşımlar, Cilt 2,
• çeviri M. Erdoğan, Nobel Dağıtım, 2001.
• Rendigs K H. “Aluminium Structures Used in
• Aerospace-Status and Prospects”, J. Mater. Sci.
• Forum, 242: 11-24, 1997.
• Heinz, A., Haszler, A., Keidel, C., Moldenhauer,
• S., Benedictus, R., Miller, W S., “Recent
• Development in Aluminium Alloys for
• Aerospace Applications”, Mat. Sci. Eng. A.,
• , 102-107, 2000.
• Yurdakul, M., Özbay, O., İç, Y. T., “Selection
• of Aerospace Alumınum Alloys, Journal of the
• Faculty of Engineering Architecture of Gazi
• University, Vol. 17, No 2, 1-23, 2002.
• Wu, Y.L., Froes, F. H, Alvarez A., Li C.G,, Liu
• J., Microstructure and Properties of a New
• Super-High-Strength Al–Zn–Mg–Cu alloy
• C912, Mater. Design, 18, 211–215. 1997.
• Dumont, D., Deschamps, A., Brechet, Y., 2003.
• “On the Relationship between Microstructure,
• Strength and Toughness in AA7050 Aluminum
• Alloy”. Mater. Sci. Eng. A, 356, 326–336.
• Ferrer, C. P., “Optimizing the Strength and SCC
• Resistance of Aluminium Alloys Used for
• Refurbishing Aging Aircraft”, U.S.N.A Trident
• Scholar project report, 2001.
• ASM Handbook, Heat Treating, ASM.
• International Materials Park, Ohio” vol. 4, 1990.
• Ferrer, C.P., Koul, M.G., Connolly, B.J., Moran,
• A.L., “Improvements in Strength and Stress
• Corrosion Cracking Properties in Aluminum
• Alloy 7075 via Low-Temperature Retrogression
• and Re-Ageing Heat Treatments”, Corrosion 6,
• –528, 2003.
• Cina, B.M., “Reducing the Susceptibility of
• Alloys, Alloys Particularly Aluminium to Stress
• Corrosion Cracking”, U.S. Patent, No: 3, 856,
• , Dec. 24, 1974.
• Park, J.K, Ardell, A.J., “Effect of Retrogression
• and Reaging Treatments on the Microstructure
• of Al-7075-T651”. Mater. Trans. A, 15, 1531–
• 1984.
• Park J K. “Influence of Retrogression and Re-
• Ageing on the Strength and Stress Corrosion
• Resistance of Aluminium Alloy 7075-T6”,
• Mater. Sci. Eng. A 103 (2): 223-231, 1988
• Viana F, Pinto AMP, Santos HMC, Lopes AB.,
• “Retrogression, Re-Aging of 7075 Aluminium
• Alloy: Microstructural Characterization”, J.
• Mater. Process. Tech. 92–93, 54–59, 1999.
• Holt, R.T., Raizenne, M. D., and Wallace, W.,
• “RRA Heat Treatment of Large Al 7075-T6
• Components”, Technical Report No:
• ADP010412, 1999.
• Kibar, E., 7075 Alüminyum Alaşımlarına
• Uygulanan RRA Isıl İşlemlerinin Mikroyapı
• ve Mekanik Özelliklerine Etkisi”, Sakarya
• Üniversitesi, Fen Bilimleri Enstitüsü, Yüksek
• Lisans Tezi, Sakarya, 2010.
• Yılmaz, R., Özyürek, D., Kibar, E., “The
• Effects of Retrogression Parameters on Hardness
• and Wear Behaviours of 7075 Aluminium
• Alloys”, Journal of the Faculty of Engineering
• Architecture of Gazi University in press 2012.
• Baydogan, M., Cimenoglu, H., Kayalı, E.S.,
• RRA Işleminin 7075 Alaşımının Mekanik
• Özelliklerine Etkisi, ITÜ Dergisi/d,
• Mühendislik, Cilt: 3, Sayı: 6, 108-116, 2004.
• Islam M.U., Wallace W., “Stress Corrosion-
• Crack Growth Behaviour of 7475 T6
• Retrogressed and Re-aged Aluminium Alloy”,
• Metals Technology, 11, 320-322., 1984
• Danh, N.C., Rajan, K., and Wallace, W., “A
• TEM Study of Microstructural Changes During
• Retrogression and Reaging in 7075 Aluminum”,
• Metall.Mater.Trans. A14, 9, 1843-1850., 1983.
• Rajan, J.K., Wallace, W., Beddoes, J.C.,
• “Microstructural Study of A High-Strength
• Stress-Corrosion Resistant 7075 Aluminum
• Alloy”, J. Mater. Sci. 17, 10, 2817-2824, 1982.
• Li, G. F., Zhang, X. M., Lı, P. H., You J. H.,
• “Effects of Retrogression Heating Rate on
• Microstructures and Mechanical Properties of
• Aluminium Alloy 7050”, Trans. Nonferrous
• Met. Soc. China, 20, 935-941, 2010.
• Marlaud T., Deschamps A., Bley F., Lefebvre
• W., Baroux B., “Evolution of Precipitate
• Microstructures during the Retrogression, Re-
• Aging Heat Treatment of an Al– Zn–Mg–Cu.
• Alloy”, Acta Mater. 58, 4814–4826, 2010.
• Kamp, N., Sinclair, I., Starink, M.J., Toughness-
• Strength Relations in the Overaged 7449 Al-
• Based Alloy, Metall. Mater. Trans. A, 33, 4,
• -1136, 2002.
• Abolhasani, A., Zarei-Hanzaki, H.R., Abedi,
• M.R. Rokni, The room temperature mechanical
• properties of hot rolled 7075 aluminum alloy,
• Mater. Design, 34, 631-636, 2012.
• Fang, S.F., Wang, M.P., Song, M., “An
• Approach for the Aging Process Optimization of
• Al–Zn–Mg–Cu Series Alloys”, Mater. Design,
• , 2460–2467, 2009.
• Oliveira A.F., Barros M.C., Cardoso K.R.,
• Travessa D.N., “The Effect of RRA on the
• Strength and SCC Resistance on AA7050 and
• AA7150 Aluminium Alloys”, Mater. Sci. Eng.
• A 379, 321-326, 2004.
• Delasi R., Adler, P.N., “Calorimetric Studies of
• Series Aluminum Alloys: I. Matrix
• Precipitation Characterization of 7075”, Metall.
• Trans. A, vol. 8A, 1177-1183, 1977.
• Reda, Y. Abdel-Karim, R., Elmahallawi, I.,
• “Improvements in Mechanical and Stress
• Corrosion Cracking Properties in Al-Alloy 7075
• via Retrogression and Re-aging”, Mater. Sci.
• Eng. A 485, 468–475, 2008.
• Buha J, Lumley RN, Crosky AG. “Secondary
• Ageing in an Aluminum Alloy 7050”, Mater.
• Sci. Eng. A, 492 1–10, 2008.
• Meng, C, Long H, Zheng Y. “Study of the
• Mechanism of Hardness Change of Al–Zn–Mg
• Alloy during Retrogression Re-Aging
• Treatments by Small Angle X-Ray Scattering
• (SAXS)”, Metall. Mater. Trans. A 28:2067–
• , 1997.
• Papazian, J.M., “Differential Scanning
• Calorimetry Evaluation of Retrogressed and Re-
• Aged Microstructures in Aluminum Alloy
• ”, Mater. Sci. Eng. A 79, 1, 97–104, 1986.
• Ning, A., Liu, Z., Peng, B., Zeng, S.,
• “Redistribution and Re-Precipitation of Solute
• Atom During Retrogression and Reaging of Al-
• Zn-Mg-Cu Alloys”, Trans. Nonferrous Met.
• Soc. China, 17, 1005-1011, 2007.
• Feng, C., Lui, Z.Y., Ning, A.L., Lui, Y. B., Zeng,
• S.M., “Retrogression and Re-Aging Treatment of
• A1-9.99YoZn- 1.72% Cu-2.5% Mg-O. 13% Zr
• aluminum Alloy”, Trans. Nonferrous Met. Soc.
• China, 16, 1163-1170, 2006.
• Baldantoni, A., “On the Microstructural Changes
• during the Retrogression and Re-aging of 7075
• Type Aluminum Alloys", Mater. Sci. Eng. 72,
• L5-L8, 1985.
• Li, Z. H , Xiong, B., Zhang, Y., Zhu, B.H.,
• Wang, F., Liu, H., “Ageing Behavior of an Al-
• Zn-Mg-Cu Alloy Pre-Stretched Thick Plate”, J.
• Uni. Sci. and Techn. Beijing, 14, 3, 246-250,
• -
• Talianker, M., Cina B., “Retrogression and Re-
• Aging and the Role of Dislocations in the Stress
• Corrosion of 7000-Type Aluminum Alloys”,
• Metall. Mater. Trans. A, 20, 2087-2092, 1989.
• Li, Z., Xiong, B., Zhang, Y., Zhu, B., Wang, F.,
• Liu, H., “Investigation on Strength, Toughness
• and Microstructure of an Al–Zn–Mg–Cu Alloy
• Pre-Stretched Thick Plates in Various Ageing
• Tempers”, J. Mater. Process. Tech., 209, 2021–
• , 2009.