___

• Goeuriot F. P., Thevenot, J., Driver, H., “Surface
• Treatment of Steels: Boridif, a New Boriding
• Process”, Thin Solid Films, 78, 67-76, 1981.
• Bozkurt, N., Bor Yayınımı ile Çeliklerde Yüzey
• Sertleştirme, Doktora tezi, İstanbul Teknik
• Üniversitesi, Fen Bilimleri Enstitüsü, 1984.
• Ozbek I., Akbulut H., Zeytin S., Bindal C., Ucısık
• A.H., “The Characterization of Borided %99,5
• Purity Nickel”, Surface and Coatings
• Technology, 126:166-170, 2000.
• Sinha, A.K., 1991, Boriding, ASM Handbook,
• :437-447.
• Ozbek, I., Konduk, B. A., Bindal, C., Ucısık,
• A.H., “Characterization of Borided AISI 316 L
• Stainless Steel Implant”, Vacuum, 65, 521-525,
• -
• Yoon, J. H., Jee, Y. K., Lee, S. Y., “Plasma Paste
• Boronizing Treatment of the Stainless Steel AISI
• ”, Surface and Coatings Technology, 112,
• -75, 1995.
• Pertek, A., Kukla, M., “Characterization of
• Complex (B+C) Diffusion Layers Formed on
• Chromium and Nickel-Based Low Carbon Steel”,
• Applied Surface Science, 202, 252-260, 2002.
• Küper A., Qiao, X., Stock, H.R., Mayr, P., “A
• Novel Approach to Gas Boronizing”, Surface and
• Coatings Technology, 130, 87-94, 2000.
• Nam, K. S., Lee, K. H., Lee, S. R., Kwon, S. C.,
• “A Study on Plasma-Assited Boriding of Steels”,
• Surface and Coatings Technology, 98, 886-890,
• -
• Hunger, H. J., Löbig, G., “Generation of Boride
• Layers on Steel and Nickel Alloys by Plasma
• Activation of Boron Trifluoride, Thin Solid
• Films, 310, 244-250, 1997.
• Filep, E., Farkas, S., “Kinetics of plasma-assisted
• boriding”, Surface and Coatings Technology,
• , 1-6, 2005.
• Cabeo, E. R., Laudien, G., Biemer, S., Rie, K.-T.,
• Hoppe, S., “Plasma-Assisted Boriding of
• Industrial Components in a Pulsed d.c. Glow
• Discharge”, Surface and Coatings Technology,
• -119, 229-233, 1999.
• Bartsch, K., Leonhardt, A., “Formation of Iron
• Boride Layers on Steel by d.c.-Plasma Boriding
• and Deposition Processes”, Surface and
• Coatings Technology, 116-119, 386-390, 1999.
• Gunes, I., Ulker, U., Taktak, S., “Plasma Paste
• Boronizing of AISI 8620, 52100 and 440C steels”
• Materials and Design, Inpress.
• Kulka, M., Pertek, A., “The Importance of
• Carbon Content Beneath Ironborides After
• Boriding Of Chromium and Nickel-based Lowcarbon
• Steel”, Applied Surface Science, 214,
• -171, 2003.
• Tabur, M., İzciler, M., Gul, F., Karacan, I.,
• “Abrasive Wear Behavior of Boronized AISI
• Steel”, Wear, 266, 1106-1112, 2009.
• Oliveria, C. K. N., Casteletti, L. C., Lombardin,
• A., Totten, G. E., Heck, S. C., “Production and
• Characterization of Boride Layers on AISI D2
• Tool Steel”, Vacuum, 84, 792-796, 2010.
• Lou, D. C., Akselsen, O. M., Solberg, J. K.,
• Onsoien, M. I., Berget, J., Dahl, N., “Silicon-
• Boronising of Nimonic 90 Superalloy”, Surface
• and Coatings Technology, 200, 3582-3589,
• -
• Sahin, S., “Effects of Boronizing Process on the
• Surface Roughness and Dimensions of AISI
• , AISI 1040 and AISI 2714”, Journal of
• Materials Processing Technology, 209, 1736-
• , 2009.
• Er, U., Par, B., “Wear of Plowshare Components
• in SAE 950C Steel Surface Hardened by Powder
• Boriding”, Wear, 261, 251-255, 2006.
• Meriç, C., Şahin, S. ve Yılmaz, S. S.,
• “Investigation of The Effect on Boride Layer of
• Powder Particle Size Used in Boronizing with
• Solid Boron-Yielding Substances”, Materials
• Research Bulletin, 35, 2165-2172, 2000.
• Atik, E., Yunker, U., Meric, C., “The Effects of
• Conventional Heat Treatment and Boronizing on
• Abrasive Wear and Corrosion of SAE 1010, SAE
• , D2 and 304 Steels”, Tribology
• International, 36, 155-161, 2003.
• Bejar, M. A., Henríquez, R., “Surface Hardening
• of Steel by Plasma-Electrolysis Boronizing”,
• Materials and Design, 30, 1726-1728, 2009.
• Chen, X. J., Yu, L. G., Khor, K. A., Sundararajan,
• G., “The Effect of Boron-Pack Refreshment on
• the Boriding of Mild Steel by the Spark Plasma
• Sintering (SPS) Process”, Surface and Coatings
• Technology, 202, 2830-2836, 2008.
• Yu, L. G., Chen, X. J., Khor, K. A., Sundararajan,
• G., “FeB/Fe2B Phase Transformation During SPS
• Pack-Boriding: Boride Layer Growth Kinetics”,
• Acta Materialia, 53, 2361-2368, 2005.
• Bindal, C., Ticari Karbon Çelikleri ve Düşük
• Alaşımlı Çeliklerin Yüzeyine Borlamayla
• Seramik Kompozit Kaplama ve Bazı Malzeme
• Özelliklerine Etkileri, Doktora Tezi, İstanbul
• Teknik Üniversitesi, Fen Bilimleri Enstitüsü,
• İstanbul, 1991.
• Sen, S., Ozbek, I., Sen, U., Bindal, C.,
• “Mechanical Behavior of Borides Formed on
• Borided Cold Work Tool Steel”, Surface and
• Coatings Technology, 135, 173-177, 2001.
• Ozbek, I., Bindal, C., “Mechanical Properties of
• Boronized AISI W4 Steel”, Surface and
• Coatings Technology, 154, 14-20, 2002.
• Sen, S., Sen, U., Bindal, C., “The Growth Kinetics
• of Borides Formed on Boronized AISI 4140
• Steel”, Vacuum, 77, 195-202, 2005.
• Culha, O., Toparli, M., Sahin, S., Aksoy, T.,
• “Characterization and Determination of FexB
• Layers’ Mechanical Properties”, Journal of
• Materials Processing Technology, 206, 231-
• , 2008.
• Sahin, S., Meriç, C., Saritas, S., “Production of
• Ferroboron Powders by Solid Boronizing
• Method”, Advanced Powder Technology, 21,
• -487, 2010.
• Baştürk, S., Erten, M., “Borlama ile Yüzey
• Sertleştirme Çalışmaları”, Mühendis Makine
• Dergisi, Cilt 47, Sayı 563, 2006.
• Çelebi, F. G., 31CrMoV9 ve 34CrAlNi7
• Çeliklerinin Borlama Kinetiklerinin
• İncelenmesi, Yüksek Lisans Tezi, Sakarya
• Üniversitesi, Fen Bilimleri Enstitüsü, Sakarya,
• -
• Şen, Ş., Termokimyasal Borlama İşlemi ile
• AISI 5140, AISI 4140 ve AISI 4340
• Çeliklerinin Yüzey Performanslarının
• Geliştirilmesi, Doktora Tezi, Sakarya
• Üniversitesi, Fen Bilimleri Enstitüsü, Sakarya,
• -
• Bindal, C., Üçışık, A. H., “Characterization of
• Boriding of 0.3% C, 0.02% P Plain Carbon
• Steel”, Vacuum, 82, 90-94, 2008.
• Ozdemir, Ö., Omar, M. A., Usta, M., Zeytin, S.,
• Bindal, C., Ücisik, A. H., “An Investigation on
• Boriding Kinetics of AISI 316 Stainless Steel”,
• Vacuum, 83, 175-179, 2008.