KLİMALAR İÇİN YENİ BİR KONTROL SİSTEMİ

İklimlendirme üzerine yapılan çalışmalar günümüzde, enerji tasarrufu sağlamak ve ortam sıcaklıkkonforunu daha üst düzeyde temin etmek konularında yoğunlaşmıştır. Mevcut iklimlendirme sistemleriortam sıcaklığını klima üzerindeki sıcaklık algılayıcısı ile tespit etmektedir. Bir noktadan yapılan ölçüm ilebütün bir iklimlendirme bölgesinde eşit bir konfor temini mümkün olmamaktadır. Bu çalışmada,iklimlendirmede ortam sıcaklık konforunu artırmaya yönelik “Çok Noktadan Sıcaklık Ölçümü” olarakadlandırılan bir yaklaşım sunulmaktadır. Klimada denetleyici olarak PIC18F452 işlemcisi kullanılmış olup,uzak noktalardan sıcaklık ölçümü yapan modüllerle radyo frekansında (RF) haberleşmektedir.Programlanabilme, uyku, otomatik çalışma, fan hızı ve üfleme açısı kontrolü gibi fonksiyonlar kızılötesi (IR)haberleşen bir uzaktan kumanda üzerinden yapılabilmekte, ayrıca durum bilgileri klima üzerindeki likitkristal göstergeden (LCD) izlenebilmektedir.

___

  • Khalid, M., Omatu, S., “A Neural Network
  • Controller for a Temperature Control System”,
  • IEEE, 12 (3), 58-64 (1992).
  • Serrano, B. A., Reyes, M. V., “Design of a
  • Nonlinear HVAC Control System with Thermal
  • Load Estimation”, Proceedings of the 4th IEEE
  • Conference on Control Applications, 33–39,
  • (1995).
  • Groff, G. C., “Air Conditioning System Design
  • for Buildings”, Sherratt, A. F. C., McGRAWHILL,
  • England, 192-197 (1983).
  • Esbri, J. N., Cabello, R., Torrella, E.,
  • “Experimental evaluation of the internal heat
  • exchanger influence on a vapour compression
  • plant energy efficiency working with R22, R134a
  • and R407C”, Energy, 30 (5), 621-636 (2005).
  • Lin, C., Federspiel, C., C., Auslander, D., M.,
  • “Multiple Sensors with Single HVAC System
  • Control”, International Conference For
  • Enhanced Building Operations,Richardson
  • TX, University of California, 1-11, (2002).
  • Rutman, E., “A Global Approach of Indoor
  • Environment in an Air-Conditioned Office
  • Room”, Building and Environment, 40 (1), 29-
  • , (2005).
  • Lute, P. J. and Paassen D. V., “Optimal indoor
  • temperature control with the use of a predictor”,
  • Proceedings of the Third IEEE Conference on
  • Control Applications, 3, 1843-1848 (1994).
  • Wei, K. C., “An Intelligent Automotive Climate
  • Control System”, Intelligent Systems for the
  • st Century, IEEE International Conference
  • on Systems, Man and Cybernetics, 4, 2977-
  • (1995).
  • Wang, N., Zhang, N., Wang, M., “Wireless
  • sensors in agriculture and food industry-Recent
  • development and future perspective”, Computers
  • and Electronics in Agriculture 50, Elseiver, 1-
  • , (2006).
  • Hamdi, M., Lachiver, G., “A Fuzzy Control
  • System Based on the Human sensation of Thermal
  • Comfort”, The 1998 IEEE International
  • Conference on Fuzzy Systems Proceedings, 1,
  • -492 (1998).
  • Subramanyam, N., “Application of desiccant
  • Wheel to control humidity in air-conditioning
  • systems”, Refrigeration and air conditioning
  • Labaratory, Department of Mechanical
  • Engineering Indian Institute of Technology
  • Madras, 2777-2779 (2004).
  • Wu, Chen., “Development of control method and
  • dynamic model for multi-evaporator air
  • conditioners (MEAC)”, Department of Building
  • Services Engineering, The Hong Kong
  • Polytechnic University, 455-459 (2004).
  • Sato, T., “Self-Tuning Two-Degree-of-Freedom
  • PID Controller Reducing the Effect of
  • Disturbances”, 3997-4000 (2002).
  • Microchip, PIC18F452 DataSheet, USA, 2002.
  • LM35 Data Sheet, NationalSemiconductors,
  • USA, 1-6 (1994).
  • Bal, G., “Özel Elektrik Makineleri”, Seçkin
  • Yayınları, Ankara, 99-122 (2004).
  • TSOP1136 Data Sheet, Vishay Semiconductors,
  • Germany, 1-8 (2001).
  • PT2272 Data Sheet, Princeton Technology
  • Corp.,Taiwan,1-8 (1999).
  • Geçtan, C., “Endüstriyel Elektronik ve Uygulama
  • Devreleri” , Yeniyol Matbaası, İzmir, 52-64
  • (2002).