The investigation of the corrosion rates of the waste batteries at the garbage medium and their effects to the environment

Bu çalışmada Türkiye'de sık kullanılan yirmi farklı türde pil farklı koşullarda korozif ortamda bırakılmıştır. Korozyon hızları önce ağırlık kaybı yöntemine göre belirlenmiş ardından rasgele örneklemeyle seçilen bazı pillerin korozyon hızları elektrokimyasal olarak belirlenmiştir. Son olarak bu örnekler Mamak çöplüğünden alınan çöp-çöp suyunda bekletilmiş ve korozyon hızları ağırlık kaybı yöntemine göre belirlenmiştir. Sonuçlar karşılaştırıldığında, incelenen tüm atık pillerin korozyon hızlarının çöp ortamında yüksek olduğu ve Cd, Ni ve Hg elementlerinin çöp ortamına kavuştuğu görülmüştür. Elde edilen sonuçlara göre atık pillerin insan sağlığı ve çevre üzerinde zararlı bir etkisi olduğu söylenebilir.Bu nedenle bu atiklarin diğer çöplerle karışmamasi için gerekli önlemlerin alınması şarttır.

Atık pillerin çöp ortamında korozyon hızları ve çevreye etkilerinin incelenmesi

In this study, twenty different kinds of batteries which are in frequent use in Turkey have been left in corrosive medium under different conditions. Their corrosion rates have been determined by weight loss method first and then the corrosion ,rates of some batteries, which are selected by random sampling, have been determined electrochemically. Finally, these samples have been left in the garbage - garbage water, taken from the rubbish dump of Mamak and their corrosion rates have been determined by the weight loss method. When the results were compared, it was observed that the corrosion rates of all the examined waste batteries were high in garbage medium and Cd, Ni and Hg components are mixed with the garbage medium. According to the results obtained, we can say that different waste batteries have threatening effect on human health and environment. Therefore, it is imperative that necessary measures taken to be taken to prevent mixing these wastes from with those in the garbage collector.

___

  • 1.MKE (1993). Pil Üretim Teknolojisi Yayınları.
  • 2.Tchobanglaus G. Theises H., Eliassen R., (1977). Solid Wastes in Engineering Principles and Management Issues. 621 Me Graw-Hill Inc.
  • 3.Mansfeld, F. (1976). Advances in Corrosion Science and Electrochemical Techniques for Technology 6, New York, Plenum.
  • 4.Kaesche, H. (1979). "Die Korrosion der Metalle", Springer Verlag.
  • 5.Erbil, M. (1987). Doğa, Tu. Kim D, 11,3 100- 111.
  • 6.Erbil, M. (1988). Chim. Acta Turc. 59 - 70.
  • 7.Uğurlu, A., Evirgen, M. (1994). "Tuzluçayır Eski Deponi Alanı Sızıntı Sulan", Çevre Bilimleri 1, 9 - 14 Aralık.
  • 8.Su Kirliliği Kontrol Yönetmeliği 19919 Sayılı Resmi Gazete (1988). s. 13, 4 Eylül.
  • 9.Topbaş, M.K., Brohi, R., Karaman, M. (1998). "Çevre Kirliliği", Çevre Bakanlığı, s. 77 - 79, Ankara.
  • 10.Samsunlu, A. (1988). "Endüstriyel Kirlenme ve Türkiye'deki Sorunları", 7. Türk-Alman Çevre Mühendisliği Sempozyumu 88, İTÜ, "1. Endüstriyel Kirlenme Sempozyumu", s. 307 - 321, İstanbul.