___

• Ji, S., Yan, F. and Fan, Z., "Development of a high strength Al–Mg2Si–Mg–Zn based alloy for high pressure die casting", Materials Science and Engineering: A, 626, 165-74, 2015.
• Long, A., Thornhill, D., Armstrong, C. and Watson, D., "Predicting die life from die temperature for high pressure dies casting aluminium alloy", Applied Thermal Engineering, 44, 100-107, 2012.
• Surappa, M.K., "Aluminium matrix composites: Challenges and opportunities", Sadhana, 28, 319-334, 2003.
• Diler, E.A. ve İpek, R., "Partikül Takviyeli Kompozitlerde Faktör Etkileşimlerinin Mekanik Özellikler Üzerindeki Etkisi", Mühendis ve Makine, 55, 24-30, 2014.
• Schwankl, M., Rübner, M., Flössel, M., Gebhardt, S., Michaelis, A., Singer, R.F., et al. "Active functionality of piezoceramic modules integrated in aluminum high pressure die castings", Sensors and Actuators A: Physical, 207, 84-90, 2014.
• Li, X., Xiong, S.M., Guo, Z., "On the porosity induced by externally solidified crystals in high-pressure die-cast of AM60B alloy and its effect on crack initiation and propagation", Materials Science and Engineering: A, 633, 35-41, 2015.
• Shi, J., Pries, H., Stammen, E., Dilger, K., "Chemical pretreatment and adhesive bonding properties of high-pressure die cast aluminum alloy: AlSi10MnMg", International Journal of Adhesion and Adhesives, 61, 112-121, 2015.
• Özkan, S., "Alüminyum Matriksli SiC Parçacık Takviyeli Kompozitlerin Mekanik Alaşımlama Yöntemiyle Üretimi ve Kuru Aşınma Davranışlarının İncelenmesi", Yüksek Lisans Tezi, Gazi Universitesi, Fen Bilimleri Enstitüsü,2007.
• Ekici, R., "Alüminyum Esaslı SiC Partikül Takviyeli Metal Matriksli Kompozit Malzemelerin Darbe Davranışlarının İncelenmesi", Yüksek Lisans Tezi, Erciyes Üniversitesi, Fen Bilimleri Enstitüsü, 2004.
• Kaynak, C., Boylu, S., "Effects of SiC particulates on the fatigue behaviour of an Al-alloy matrix composite", Materials & Design, 27, 776-782, 2006.
• Shan, D. and Nayeb-Hasemi, H., "Fatigue-life prediction of SiC aluminum composite using a Weilbull model", NDT&E International, 32, 265-274, 1999.
• Lu, Y.X., Meng, X.M., Lee, C.S., Li, R.K.Y., Huang, C.G., Lai, J.K.L., "Microstructure and mechanical behaviour of a SiC particles reinforced Al–5Cu composite under dynamic loading", Journal of Materials Processing Technology, 94,175-178, 1999.
• Bekheet, N.E., Gadelrab, R.M., Salah, M.F., Abd El-Azim A.N., "The effects of aging on the hardness and fatigue behavior of 2024 Al alloy/SiC composites", Materials & Design, 23,153-159, 2002.
• Dong, S.L., Mao, J.F., Yang, D.Z., Cui, Y.X., Jiang, L.T., "Age-hardening behavior of a SiCw/Al-Li-Cu-Mg-Zr composite", Materials Science and Engineering: A, 327,213-223, 2002.
• Ganesh, V.V., Chawla, N., "Effect of particle orientation anisotropy on the tensile behavior of metal matrix composites: experiments and microstructure-based simulation", Materials Science and Engineering: A, 391, 342-353, 2005.
• Milan, M.T., Bowen, P., "Tensile and fracture toughness properties of SiCp reinforced Al alloys: Effects of particle size, particle volume fraction, and matrix strength", J of Materi Eng and Perform, 13, 775-783, 2004.
• Chawla, N., Jones, J.W., Andres, C., Allison, J.E., "Effect of SiC volume fraction and particle size on the fatigue resistance of a 2080 Al/SiC p composite", Metall and Mat Trans A, 29, 2843-2854, 1998.
• Narayanasamy, R., Ramesh, T., Prabhakar, M., "Effect of particle size of SiC in aluminium matrix on workability and strain hardening behaviour of P/M composite", Materials Science and Engineering: A, 504, 13-23, 2009.
• Hall, J.N., Wayne Jones J., Sachdev, A.K., "Particle size, volume fraction and matrix strength effects on fatigue behavior and particle fracture in 2124 aluminum-SiCp composites", Materials Science and Engineering: A,183, 69-80, 1994.
• Song, M., "Effects of volume fraction of SiC particles on mechanical properties of SiC/Al composites", Transactions of Nonferrous Metals Society of China,19,1400-1404, 2009.
• Liu, Z.Y., Wang, Q.Z., Xiao, B.L., Ma, Z.Y., "Clustering model on the tensile strength of PM processed SiCp/Al composites" Composites Part A: Applied Science and Manufacturing, 41,1686-1692, 2010.
• Slipenyuk, A., Kuprin, V., Milman, Y., Spowart, J.E., Miracle, D.B., "The effect of matrix to reinforcement particle size ratio (PSR) on the microstructure and mechanical properties of a P/M processed AlCuMn/SiCp MMC", Materials Science and Engineering: A, 381, 165-170, 2004.
• Özdin, K., "Alüminyum Esaslı SiC Takviyeli Kompozitlerin Üretimi Ve Aşınma Özelliklerinin Araştırılması", Doktora tezi, Gazi Üniversitesi, Fen Bilimleri Enstitüsü, 2006.