Polianilin/Aljinat Malzemesinin Asit Violet 90 Boyar Maddesinin Gideriminde Kullanılması: Kinetik Ve İzoterm Değerlendirmesi
Bu çalışmada Polianilin/Aljinat (PANİ/SA) adsorbent malzemesi Asit Violet 90 (AV 90) boyarmaddesinin adsorpsiyonunda kullanılmıştır. PANİ/SA’nın karakterizasyonu Fourier DönüşümKızılötesi Spektroskopisi (FTIR) ile analiz edilmiştir. pH (2-6), PANİ/SA küre sayısı (10-50 adet)ve AV 90 derişiminin (25-200 mg/L) boyar madde giderimine etkisi incelenmiştir. En yüksekboyar madde giderimi pH 2’de elde edilmiştir. AV 90 adsorpsiyon izotermlerini belirlemek içinLangmuir, Freundlich ve Temkin modelleri kullanılmıştır. Boyar madde derişimi 25-200 mg/Laralığında iken Langmuir modelinden elde edilen maksimum adsorpsiyon kapasitesi (q m ) değeri138,9 mg/g olarak bulunmuştur. Adsorpsiyon kinetiğinin belirlenmesi için Yalancı birinci dereceve ikinci derece kinetik modelleri kullanılmış ve Yalancı ikinci derece kinetik modelin deneyverileri ile daha uyumlu olduğu görülmüştür. Deney sonuçları PANİ/SA adsorbentinin AV 90boyar maddesinin adsorpsiyonu için oldukça iyi bir alternatif olduğunu göstermiştir.
Use of Polyaniline/Alginate Composite Material in the Adsorption of Acid Violet 90 Dye:Kinetics and Isotherm Evaluation
In this study, Polyaniline/Alginate (PANI/SA) material was used to adsorption of Acid Violet 90 (AV 90) dye. The characterization of PANI/SA was analyzed by Fourier transform infrared spectroscopy (FTIR). The effect of pH (2-6), number of PANI/SA beads (10-50 adet) and concentration of AV 90 (25-200 mg/L) on removal of dye were examined. The highest dye removal was obtained at pH 2. Langmuir, Freundlich and Temkin models were used to determine AV 90 adsorption isotherms. The maximum adsorption capacity (q m ) value obtained from the Langmuir model in the range of 25-200 mg/L dye concentrations was found to be 138.9 mg / g. To determine the adsorption kinetics, Pseudo first order and second order kinetic models were used and it was found that the Pseudo second order kinetic model was more compatible with the experimental data. Experimental results have shown that PANI/SA adsorbent is a very good alternative for adsorption of AV 90 dye.
___
- Yang, L., Ma, X., Guo, N., “Sodium alginate/Na+-rectorite composite microspheres: preparation,
characterization, and dye adsorption”, Carbohydrate Polymers, 90, 853-858, 2012.
- Mohammadi, A., Daemi, H., Barikani, M., “Fast removal of malachite green dye using novel
superparamagnetic sodium alginate-coated Fe3O4 nanoparticles”, International Journal of Biological
Macromolecules, 69, 447-455, 2014.
- Laabd, M., Ahsaine, H. A., Jaouhari, A., Bakiz, B., Bazzaoui, M., Ezahri, M., Albourine, A.,
Benlhachemi A., “Congo red removal by PANi/Bi2WO6 nanocomposites: Kinetic, equilibrium and
thermodynamic studies”, Journal of Environmental Chemical Engineering 4, 3096–3105, 2016.
- Patil, M.R., Shrivastava, V.S., “Adsorption removal of carcinogenic acid violet19 dye from
aqueous solution by polyaniline-Fe2O3 magnetic nano-composite”, J.Mater.Environ.Sci. 6 (1), 11-21, 2015.
- Hassani, A., Soltani, R. D. C., Karaca, S., Khataee, A., “Preparation of montmorillonite–alginate
nanobiocomposite for adsorption of a textile dye in aqueous phase: Isotherm, kinetic and experimental
design approaches”, Journal of Industrial and Engineering Chemistry 21, 1197–1207, 2015.
- Sarıoğlu, Ö.F., Keskin, N.O., Çelebioğlu, A., Tekinay, T., Uyar, T., “Bacteria encapsulated
electrospun nanofibrous webs for remediation of methylene blue dye in water”, Colloids and Surfaces B:
Biointerfaces, 152, 245-251, 2017.
- Kocaer, F.O., Alkan, U., “Boyar madde içeren tekstil atık sularının arıtım alternatifleri” , Uludağ
Üniv. Müh.Mim.Fak.Dergisi, Cilt 7, No 1, 47-55, 2002.
- Jain, R., Gupta, V.K., Sikarwa, S., “Adsorption and desorption studies on hazardous dye Naphthol
Yellow S”, Journal of Hazardous Materials, Cilt 182, 749-756, 2010.
- Gengec, E., “Color removal from anaerobic/aerobic treatment effluent of bakery yeast wastewater
by polyaniline/beidellite composite materials”, Journal of Environmental Chemical Engineering, 3, 2484–
2491, 2015.
- Pandiselvi, K., Thambidurai, S., “Synthesis of porous chitosan–polyaniline/ZnO hybrid composite
and application for removal of reactive orange 16 dye”, Colloids and Surfaces B: Biointerfaces 108, 229–
238, 2013.
- Wang, J., Han, X., Ma, H., Ji, Y., Bi, L., “Adsorptive removal of humic acid from aqueous solution
on polyaniline/attapulgite composite”, Chemical Engineering Journal 173, 171– 177, 2011.
- Salem, M.A., Elsharkawy, R., Hablas, M.F., “Adsorption of Brilliant Green dye by
polyaniline/silver nanocomposite: Kinetic, equilibrium, and thermodynamic studies”, European Polymer
Journal, 75, 577-590, 2016.
- Mu,B., Tang, J., Zhang, L., Wang, A., “Preparation, characterization and application on dye
adsorption of a well-defined two-dimensional superparamagnetic clay/polyaniline/Fe3O4 nanocomposite”,
Applied Clay Science, 132–133, 7-16, 2016.
- Olad, A., Naseri, B., “Preparation, characterization and anticorrosive properties of a novel
polyaniline/clinoptilolite nanocomposite”, Progress in Organic Coatings, 67, 233–238, 2010.
- Jiang, N., Xu, Y., Dai, Y., Lou, W., Dai, L., “Polyaniline nanofibers assembled on alginate
microsphere for Cu2+ and Pb2+ uptake”, Journal of Hazardous Materials,215-216,17-24, 2012.
- Ayazi,Z., Khoshhesab, Z.M., Azhar, F.F., Mohajeri, Z., “Modeling and Optimization of Adsorption
Removal of Reactive Orange 13 on the Alginate–Montmorillonite–Polyaniline Nanocomposite via
Response Surface Methodology”, Journal of the Chinese Chemical Society, 64, 627-639, 2017.
- Zhuang, Y., Yu, F., Chen, J., Ma, J., “Batch and column adsorption of methylene blue by
graphene/alginate nanocomposite: Comparison of single-network and double-network hydrogels”, Journal
of Environmental Chemical Engineering, 4(1), 147-156, 2016.
- Karthik, R., Meenakshi, S., “Removal of Cr(VI) ions by adsorption onto sodiumalginatepolyaniline
nanofibers”, International Journal of Biological Macromolecules, 72, 711–717, 2015.
- Sharma, V., Rekha, P., Mohanty, P., “Nanoporous hypercrosslinked polyaniline: An efficient
adsorbent for the adsorptive removal of cationic and anionic dyes”, Journal of Molecular Liquids, 222,
1091-1100, 2016.
- Lu, T., Xiang, T., Huang, X.L., Li,C., Zhao, W.F., Zhang, Q., Zhao, C.S., “Post-crosslinking
towards stimuli-responsive sodium alginate beads fort he removal of dye and heavy metals”, Carbohydrate
Polymers, 133, 587-595, 2015.
- Kaykıoğlu, G., “Kolemanit ve Üleksit Atığı ile Sulu Çözeltilerden Metilen Mavisi Giderimi:
Kinetik ve İzoterm Değerlendirmesi”, CBÜ Fen Bil. Dergi., 12(3), 499-509, 2016.
- Okur, M., “Tekstil Atık sularındaki Metal Kompleks Boyarmaddelerin Yumurta Kabukları İle
Giderimi”, Journal of the Faculty of Engineering and Architecture of Gazi University, 28 (4), 777-785,
2013.
- Rafiqi, F.A., Majid, K., “Removal of copper from aqueous solution using polyaniline and
polyaniline/ferricyanide composite”, Journal of Environmental Chemical Engineering, 3, 2492-2501,2015.