___

• [1] Eren, Y. Kompozit Yapıların Darbe Etkilerinin İncelenmesi, Yüksek Lisans Tezi, Dumlupınar Üniversitesi Fen Bilimleri Enstitüsü, Kütahya , 2007.[2] Ersoy, M.S. Lif Takviyeli Polimerik Kompozit Malzeme Tasarımı, Yüksek Lisans Tezi, Kahramanmaraş Sütçü İmam Üniversitesi Fen Bilimleri Enstitüsü, Kahramanmaraş, 2005.[3] Rusinek, R. Cutting process of composite materials:An experimental study, International Journal of Non-Linear Mechanics 45, (2010) 458-462.[4]Kalla, D., Sheikh-Ahmad, J., Twomey, J. Prediction of cutting forces in helical end milling fiber reinforced polymers, International Journal of Machine Tools and Manufacture, 50(10), (2010) 882-891.[5] Davim, J.P., Reis, P. Damage and dimensional precision on milling carbon fiber-reinforced plastics using design experiments, Journal of Materials Processing Technology, (2005) 160-167.[6]Akira, H., Naoya, H., Takashi, U., Tatsuaki, F. High-quality machining of CFRP with high helix endmill, Manufacturing Technology , (2014) 89-92 [7] Gaitonde, V. N., Karnik, S. R., Rubio, J. C., Correia, A. E., Abrao, A. M., Davim, J. P. Analysis of parametric influence on delamination in high-speed drilling of carbon fiber reinforced plastic composites, Journal of materials processing technology, 203(1), (2008) 431-438.[8] Shyha, I.S., Aspinwall, D.K., Soo, S.L., Bradley, S. Drill geometry and operating effects when cutting small diameter holes”, C. International Journal of Machine Tools&Manufacture, (2009) 1008-1014.[9] Davim, J.P., Rubio, J.C., Abrao, A.M. A novel approach based on digital ımage analysis to evaluate the delamination factor after drilling composite laminates, Composite Science and Technology, (2007) 1939-1945.[10] Davim, J.P., Reis, P. Drilling carbon fiber reinforced plastics manufactured by autoclave-experimental and statistical study, Materials and Design, (2004) 315-324 [11] Davim, J.P., Reis, P. Study of delamination in drilling carbon fiber reinforced plastics (CFRP) using experiments, Composite Structures, (2003) 481-487 [12] Tsao, C. C., Hocheng, H. Computerized tomography and C- Scan for measuring delamination in the drilling of composite materials using various drills”, International Journal of Machine Tools&Manufacture, (2005) 1282-1287.[13] Chen, W. C. Some experimental investigations in the drilling of carbon fiber reinforced plastic (CFRP) composite laminates, International Journal of Machine Tools&Manufacture, (1997) 1097-1108. [14] Urban, N. A. Analysis of machining quality in edge trimming of carbon fiber reinforced composite”, Doctoral dissertation, Wichita State University, (2005) 21-36.[15] Karpat, Y., Polat, N. Mechanistic force modeling for milling of carbon fiber reinforced polymers with double helix tools”, CIRP Annals - Manufacturing Technology 62, (2013) 95–98.[16] Kurt, A. Talaş kaldırma sırasında oluşan kesme kuvvetleri ve mekanik gerilmelerin deneysel olarak incelenmesi ve matematiksel modellerinin oluşturulması, Doktora Tezi, Gazi Üniversitesi Fen Bilimleri Enstitüsü, Ankara, 2006.[17] Sorrentino, L., Turchetta, S. Milling of Carbon Fiber-Reinforced Plastics: Analysis of Cutting Forces and Surface Roughness, 18th International Conference On Composıte Materials, Korea, 2011.[18] Hill, T., Lewicki, P., Lewicki, P. “Statistics: methods and applications: a comprehensive reference for science, industry, and data mining”, StatSoft, (2006) 21-35.[19] Feito, N., Díaz-Álvarez, J., Díaz-Álvarez, A., Cantero, J. L., López-Puente, J., & Miguelez, H. Influence of Tool Geometry in Drilling”, CFRP. ECCM16 - 16th European Conference On Composite Materials, Seville, Spain, 2014.[20] Çakıroğlu, R. Delik Delme İşlemlerinde Kesme Parametrelerine Bağlı Olarak Oluşan Sıcaklığın Modellenmesi, Yüksek Lisans Tezi, Gazi Üniversitesi Fen Bilimleri Enstitüsü, Ankara, 2011.