Surface characterization of commercial chitosan with SEM and BET techniques

Chitosan, a natural polymer, has recently been the focus of attention of researchers due to its superior properties such as biocompatible, biodegradable, renewable, and low toxicity. Especially in the fields of chemistry and health sciences, its use as a wound dressing material, adsorbent, resin, drug carrier system, and food packaging is being researched. This study, it is aimed to contribute to the areas where chitosan is used as adsorbent, resin, and wound dressing material by making surface characterization. According to the data obtained from the study, it was determined that chitosan was a non-porous polymer with a membranous surface. In addition, it was determined that there may be calcium particles as a surface impurity on the surface of commercial chitosan samples.

Keywords:

Chitosan, SEM and BET techniques, Morphological analysis,

PDF

___

[1] Pillai CKS, Paul W, Sharma, CP. “Chitin and chitosan polymers: Chemistry, solubility and fiber formation”. Progress in Polymer Science, 34, 641–678, 2009.
[2] Sağ Y. “Investigation of the biosorption of heavy metal ions on chitin and chitosan”. TÜBİTAK Report, Project Number: 199Y095, 2001.
[3] Elibol M. “Production of chitin, chitosan, and derivatives from shellfish residues”. TÜBİTAK Report, Project Number: 106M241, 2008.
[4] Latańska I, Rosiak P, Paul P, Sujka W, Kolesińska B. Modulating the Physicochemical Properties of Chitin and Chitosan as a Method of Obtaining New Biological Properties of Biodegradable Materials. Editors: Berrade M. Chitin and Chitosan - Physicochemical Properties and Industrial Applications, 1-33, Intechopen, 2021.
[5] Jin T, Liu T, Lam E, Moores A. "Chitin and chitosan on the nanoscale". Nanoscale Horizons, 6, 505-542, 2021.
[6] Polat H. “Synthesis, characterization and comparative studies of toxic metal adsorption of chitin and chitosan biosorbents from pink shrimp (Parapenaeus Iongirostris) shell waste”. TÜBİTAK Report, Project Number: 106T111, 2008.
[7] Sonia TA. Sharma CP. Chitosan and Derivatives for Drug Delivery Perspectives. Editors: Jayakumar R, Prabaharan M, Muzzarelli A. Chitosan for Biomaterials I, 111-137, Springer Berlin, Heidelberg Advances in Polymer Science, 2011.
[8] Cho YW. Jang J, Park CR, Ko SW. “Prepartion and solubility in acid and water of partially deacetylated chitins”. Biomacromolecules, 1, 609-614, 2000.
[9] Kim YK, Jiang HL, Choi YJ, Park IK, Cho MH, Cho CS. “Polymeric nanoparticle of chitosan derivatives as DNA and siRNA carriers”. Advances in Polymer Science, 243, 1-21, 2011.
[10] Wu WC, Hsiao PY, Huang YC. “Effects of amylose content on starch-chitosan composite film and its application as a wound dressing”. Journal of Polymer Research, 26, 137, 2019.
[11] Kyzas GZ, Bikiaris DN, "Recent modifications of chitosan for adsorption applications: A critical and systematic review". Marine Drugs, 13, 312-337, 2015.
[12] Darder M, Colilla M, Ruiz-Hitzky E. “Biopolymer-clay nanocomposite based on chitosan intercalated in montmorillonite”. Chemistry of Materials, 15, 3774-3780, 2003.
[13] Moussout H, Ahlafi H, Aazza M, Amechrouq A. “Bentonite/chitosan nanocomposite: Preparation, characterization and kinetic study of its thermal degradation”, Thermochimica Acta, 659, 191-202, 2018.