Cem PEŞKERSOY, Duygu RECEN, Hande KEMALOGLU

The effect of composite placement technique on the internal adaptation, gap formation and microshear bond strength

Purpose: This study aimed to compare the efficiency of placement technique on internal adaptation, gap formation and microshear bond strength (µSBS) of bulk-fill composite resin materials. Materials and methods: Standardized class V cavities were prepared for microcomputed tomography (mCT) test and divided into four groups (n=12) as follows: Group SDR: Smart Dentin Replacement system/bulk fill; Group SF2: Sonic-Fill system/bulk fill sonic-activated composite placement system; Group CHU: Herculite-XRV-Ultra composite resin inserted with Compothixo/sonic-vibrated composite resin placement system; Group HIT: Herculite-XRVUltra composite resin applied with incremental technique. Self-etch adhesive (Optibond-XTR) was used for bonding in all groups. After 10000 thermocycling, mCT scans were taken to reveal gap formation at the tooth-restoration interface and universal testing machine was used to test microshear bond strength (µSBS) values (n=10). ANOVA, post-hoc Bonferroni and Tukey HSD tests were used for evaluating the gap formation and µSBS values (p=0.05). Results: SF2 and CHU showed the best adaptability compared with both SDR and HIT. The difference between groups SDR and HIT was statistically significant (p<0.05). µSBS values were found to be the highest for SF2, and the lowest for HIT groups (p>0.05). Conclusions: Bulk-fill composite resins placed either with sonic-activated or sonic-vibrated instrument demonstrated better adaptability, less gap formation and higher bond strength than both the bulk-fill flowable composite and conventional incremental techniques.

Keywords:

bulk-fill composite, microcomputed tomography gap formation, bond strength, sonic instrumentation,

PDF

___

Ferracane JL. Resin-based composite performance: are there some things we can't predict? Dental Materials. 2013;29(1):51-8.
Kaisarly D, Gezawi ME. Polymerization shrinkage assessment of dental resin composites: a literature review. Odontology. 2016;104(3):257-70.
Boaro LC, Fróes-Salgado NR, Gajewski VE, Bicalho AA, Valdivia AD, Soares C. Correlation between polymerization stress and interfacial integrity of composites restorations assessed by different in vitro tests. Dental Materials. 2014;30(9):984-92.
Ferracane JL, Mitchem JC. Relationship between composite contraction stress and leakage in Class V cavities. American Journal of Dentistry. 2003;16(4):239-43.
Drummond JL. Degradation, fatigue and failure of resin dental composite materials. Journal of Dental Research. 2008;87(8):710-9.
Kim HJ, Park SH. Measurement of the internal adaptation of resin composites using micro-ct and its correlation with polymerization shrinkage. Operative Dentistry. 2014;39(2):57-70.
Moharam LM, El-Hoshy AZ, Abou-Elenein K. The effect of different insertion techniques on the depth of cure and vickers surface micro-hardness of two bulk-fill resin composite materials. Journal of Clinical and Experimental Dentistry. 2017;9(2):266-71.
Benetti AR, Havndrup-Pedersen C, Honoré D, Pedersen MK, Pallesen U. Bulk-fill resin composites: polymerization contraction, depth of cure, and gap formation. Operative Dentistry. 2015;40(2):190-200.
Leevailoj C, Chaidarun S. Evaluation of Voids in Class II Restorations Restored with Bulk-fill and Conventional Nanohybrid Resin Composite. The Journal of the Dental Association of Thailand. 2018;68:132-43.
Gupta S, Vellanki VK, Shetty VK, Kushwah S, Goyal G, Chandra SM. In vitro evaluation of shear bond strength of nanocomposites to dentin. Journal of Clinical Diagnostic Research. 2015;9(1):9-11.
Agarwal RS, Hiremath H, Agarwal J, Garg A. Evaluation of cervical marginal and internal adaptation using newer bulk fill composites: An in vitro study. Journal of Conservative Dentistry. 2015;18(1):56-61.
Satterthwaite JD, Vogel K, Watts D. Effect of resin-composite filler particle size and shape on shrinkage-strain. Dental Materials. 2009;25:1612-5.
Kavrik, F, Kucukyilmaz, E. The effect of different ratios of nano‐sized hydroxyapatite fillers on the micro‐tensile bond strength of an adhesive resin. Microscopy Research and Technology. 2019;82:538-43.
Bociong K, Szczesio A, Krasowski M, Sokolowski J. The influence of filler amount on selected properties of new experimental resin dental composite. Open Chemistry. 2018;16(1):905-11.
Sagsoz O, Ilday NO, Karatas O, et al. The bond strength of highly filled flowable composites placed in two different configuration factors. Journal of Conservative Dentistry. 2016;19(1):21-5.
Cerda-Rizo ER, de Paula Rodrigues M, Vilela A, Braga S, Oliveira L, Garcia-Silva TC. Bonding interaction and shrinkage stress of low-viscosity bulk fill resin composites with high-viscosity bulk fill or conventional resin composites. Operative Dentistry. 2019;44(6):625-36.
Park SH, Kim HJ. Measurement of the internal adaptation of resin composites using micro-CT and its correlation with polymerization shrinkage. Operative Dentistry. 2014;39(2):57-70.
Sun J, Eidelman N, Gibson SL. 3D mapping of polymerization shrinkage using X-ray micro-computed tomography to predict microleakage. Dental Materials. 2009;25(3):314-20.
Kapoor N, Bahuguna N, Anand S. Influence of composite insertion technique on gap formation. Journal of Conservative Dentistry. 2016;19(1):77-81.
Hany SM, Yousry MM, Naguib EAM. Evaluation of adaptation of resin composite restorations packed using ultrasonic vibration techniques: A systematic review. Indian Journal of Science and Technology. 2016;9(18):1-9.
van Dijken JWV, Pallesen U. A randomized controlled three-year evaluation of “bulk-filled” posterior resin restorations based on stress decreasing resin technology. Dental Materials. 2014;30(9):245-51.
Kusunoki M, Itoh K, Takahashi Y, Hisamitsu H. Contraction gap versus shear bond strength of dentin adhesive in sound and sclerotic dentins. Dental Materials Journal. 2006;25(3):576-83.
Sun J, Fang R, Lin N, Eidelman N, Lin-Gibson S. Nondestructive quantification of leakage at the tooth-composite interface and its correlation with material performance parameters. Biomaterials. 2009;30(27):4457-62.
Sampaio CS, Garcés GA, Kolakarnprasert N, Atria PJ, Giannini M, Hirata R. External marginal gap evaluation of different resin-filling techniques for class II restorations: a micro-ct and sem analysis. Operative Dentistry. 2020;45(4):167-75.
Takemura Y, Hanaoka K, Kawamata R, Sakurai T, Teranaka T. Three-dimensional X-ray micro-computed tomography analysis of polymerization shrinkage vectors in flowable composite. Dental Materials Journal. 2014;33(4):476-83.
Rengo C, Goracci C, Ametrano G, Chieffi N, Spagnuolo G, Rengo S. Marginal leakage of class v composite restorations assessed using microcomputed tomography and scanning electron microscope. Operative Dentistry. 2015;40(4):440-8.
Orłowski M, Tarczydło B, Chałas R. Evaluation of marginal integrity of four bulk-fill dental composite materials: in vitro study. Scientific World Journal. 2015;15:1-8.
Han SH, Lee IB. Effect of vibration on adaptation of dental composites in simulated tooth cavities. Korea-Australian Rheology Journal. 2018;30:241–8.
Vianna-de-Pinho MG, Rego FG, Vidal M, Alonso R, Schneider LF, Cavalcante L. Clinical time required and internal adaptation in cavities restored with bulk-fill composites. The Journal of Contemporary Dental Practice. 2017;18:1107-11.
Penha KS, Souza A, Santos MJ, Júnior L, De Jesus TR. Could sonic delivery of bulk-fill resins improve the bond strength and cure depth in extended size class I cavities?. Journal of Clinical and Experimental Dentistry. 2020; 12: 1131-8.
Sampaio CS, Chiu KJ, Farrokhmanesh E, Janal M, Puppin-Rontani RM, Giannini M, Bonfante EA. Microcomputed tomography evaluation of polymerization shrinkage of class I flowable resin composite restorations. Operative Dentistry. 2017;42(1):16-23.
Furness A, Tadros MY, Looney SW, Rueggeberg FA. Effect of bulk/incremental fill on internal gap formation of bulk-fill composites. Journal of Dentistry. 2014;42(4):439-49.
Swapna MU, Koshy S, Kumar A, Nanjappa N, Benjamin S, Nainan MT. Comparing marginal microleakage of three Bulk Fill composites in Class II cavities using confocal microscope: An in vitro study. Journal of Conservative Dentistry. 2015;18:409-13.
Taneja S, Kumar P, Kumar A. Comparative evaluation of the microtensile bond strength of bulk fill and low shrinkage composite for different depths of Class II cavities with the cervical margin in cementum: An in vitro study. Journal of Conservative Dentistry. 2016;19(6):532-5.
Han SH, Park SH. Comparison of Internal Adaptation in Class II Bulk-fill Composite Restorations Using Micro-CT. Operative Dentistry. 2017;42(2):203-14.
Mehesen R, Amin LE, Montaser M. The influence of bulk and sonic placement techniques on microleakage of class ii cavities restored with different resin composites. Egyptian Dental Journal. 2020;66:1845-53.
Tolidis K, Boutsiouki C, Gerasimou P. Microleakage evaluation between higher viscosity and flowable bulk composite resins. Dental Materials. 2014;30(S1):48-57.
Hirata R, Clozza E, Giannini M, Farrokhmanesh E, Janal M, Tovar N, Bonfante EA, Coelho PG. Shrinkage assessment of low shrinkage composites using micro-computed tomography. Journal of Biomedical Materials Research Part B, Applied Biomaterials. 2015;103(4):798-806.
Penha KS, Souza AF, Dos Santos MJ, Júnior LDS, Tavarez RJ, Firoozmand LM. Could sonic delivery of bulk-fill resins improve the bond strength and cure depth in extended size class I cavities? Journal of Clinical Experimental Dentistry. 2020;12(12):1131-8.
Meric G, Taşar S, Orhan K. Bonding Strategies of Resin Cement to Er, Cr:YSGG Lased Dentin: Micro-CT Evaluation and Microshear Bond Strength Testing. The International Journal of Artificial Organs. 2016;39(2):72-6.
Montagner A, Carvalho MPM, Susin AH. Microshear bonding effectiveness of different dentin regions. Indian Journal of Dental Research. 2015;26(2):131-5.

ISSN: 2630-6158
Yayın Aralığı: Yılda 3 Sayı
Başlangıç: 1967
Yayıncı: İstanbul Üniversitesi

Arşiv