Nihan GÖNÜLOL, Lena ALMASİFAR, Özge Gizem CABADAĞ, Tuğba MİSİLLİ, Elif KALYONCUOĞLU

Shear Bond Strength of Aged Composite Restorations Repaired with a Universal Injectable Composite

Objective: The purpose of this study was to analyze the shear bond strength of a universal injectable composite used in the repair of aged composites.Methods: A total of 100 disk-shaped specimens (8 mm×2 mm) were produced using five different composites (n=20) (Gradia Direct Posterior, Tetric N Ceram BulkFill, Filtek Z250, SonicFill and Filtek BulkFill Posterior). Specimens were polymerized using an LED light curing unit for 20 s and stored at 37ºC in distilled water for 3 weeks. Specimens were subdivided into two groups per composite for repair using either the same composite used for the specimen or G-aenial Universal Flo. Following acid-etching and silane application, a universal adhesive (G-Premio BOND) was applied and light-cured. The repair materials were placed on the bonded surfaces of the specimens and polymerized in silicone molds (2 mm×2 mm). After thermocycling to simulate aging, shear bond strength (SBS) was tested using a universal testing machine at a crosshead speed of 1 mm/min. Failure modes were examined using a stereomicroscope at ×40 magnification.Results: No statistically significant differences were found among the tested composites repaired with their own substrates. How-ever, the SBS SonicFill and Filtek Bulk Fill Posterior groups had significantly lower bond strengths when repaired with G-aenial Universal Flo in comparison to repairs made with their own substrates (p

PDF

___

1. Papacchini F, Magni E, Radovic I, Mazzitelli C, Monticellia F, Goracci C, et al. Effect of intermediate agents and pre-heating of repairing resin on composite-repair bonds. Oper Dent 2007; 32: 363-71. [CrossRef ]
2. Baur V, Ilie N. Repair of dental resin-based composites. Clin Oral In-vestig 2013; 17: 601-8. [CrossRef ]
3. Vural UK, Kerimova L, Baltacioglu İH, Kiremitçi A. Bond strength of dental nanocomposites repaired with a bulkfill composite. J Clin Exp Dent 2017; 9: 437-42.
4. Jafarzadeh Kashi TS, Erfan M, Rakhshan V, Aghabaigi N, Tabatabaei FS. An in vitro assessment of the effects of three surface treatments on repair bond strength of aged composites. Oper Dent 2011; 36: 608-17. [CrossRef ]
5. Kiomarsi N, Saburian P, Chiniforush N, Karazifard MJ, Hashemikaman-gar SS. Effect of thermocycling and surface treatment on repair bond strength of composite. J Clin Exp Dent 2017; 9: 945-51. [CrossRef ]
6. Ahmadizenouz G, Esmaeili B, Taghvaei A, Jamali Z, Jafari T, Amiri Daneshvar F, et al. Effect of different surface treatments on the shear bond strength of nanofilled composite repairs. J Dent Res Dent Clin Dent Prospects 2016; 10: 9-16. [CrossRef ]
7. Imbery TA, Gray T, DeLatour F, Boxx C, Best AM, Moon P.C. Evaluation of flexural, diametral tensile, and shear bond strength of composite repairs. Oper Dent 2014; 39: 250-60.[CrossRef ]
8. Shibasaki S, Takamizawa T, Nojiri K, Imai A, Tsujimoto A, Endo H, et al. Polymerization behavior and mechanical properties of high-viscosi-ty bulk fill and low shrinkage resin composites. Oper Dent 2017; 42: 177-87. [CrossRef ]
9. Gonçalves F, Campos LMP, Rodrigues-Júnior EC, Costa FV, Marques PA, Francci CE, et al. A comparative study of bulk-fill composites: de-gree of conversion, post-gel shrinkage and cytotoxicity. Braz Oral Res 2018; 32: e17. [CrossRef ]
10. Kitasako Y, Sadr A, Burrow MF, Tagamis J. Thirty-six month clinical evaluation of a highly filled flowable composite for direct posterior restorations. Aust Dent J 2016; 61: 366-73. [CrossRef
]11. G-aenial Universal Flo Brochure-GC America. Available from: http://www.gcamerica.com/products/operatory/G-aenialFlowable/GCA_G-aenial_Bro-iPad.pdf Erişim Tarihi: 19.09.2018.
12. Bonstein T, Garlapo D, Donarummo JJr, Bush PJ. Evaluation of var-ied repair protocols applied to aged composite resin. J Adhes Dent 2005; 7: 41-9.
13. Tezvergil A, Lassila LV, Vallittu PK. Composite composite repair bond strength: effect of different adhesion primers. J Dent 2003; 31: 521-5. [CrossRef ]
14. Saunders WP. Effect of fatigue upon the interfacial bond strength of repaired composite resins. J Dent 1990; 18: 158-62. [CrossRef ]
15. Ayar MK, Guven ME, Burduroglu HD, Erdemir F. Repair of aged bulk‐fill composite with posterior composite: Effect of different surface treatments. J Esthet Restor Dent 2019; 31: 246-52.[CrossRef ]
16. Fornazari IA, Wille I, Meda EM, Brum RT, Souza EM. Effect of sur-face treatment, silane, and universal adhesive on microshear bond strength of nanofilled composite repairs. Oper Dent 2017; 42: 367-74.[CrossRef ]
17. Xie C, Han Y, Zhao XY, Wang ZY, He HM. Microtensile bond strength of one- and two-step self-etching adhesives on sclerotic dentin: the effects of thermocycling. Oper Dent 2010; 35: 547-55. [CrossRef ]
18. Gönülol N, Ertaş E, Yılmaz A, Çankaya S. Effect of thermal aging on microleakage of current flowable composite resins. J Dent Sci 2015; 10: 376-82. [CrossRef ]
19. Yesilyurt C, Kusgoz A, Bayram M, Ulker M. Initial repair bond strength of a nano-filled hybrid resin: effect of surface treatments and bond-ing agents. J Esth Restor Dent 2009; 21: 251-60. [CrossRef ]
20. Fornazari IA, Wille I, Meda EM, Brum RT, Souza EM. Effect of sur-face treatment, silane, and universal adhesive on microshear bond strength of nanofilled composite repairs. Oper Dent 2017; 42: 367-74.[CrossRef ]
21. Versluis A, Tantbirojn D, Douglas WH. Why do shear bond tests pull out dentin? J Dent Res 1997; 76: 1298-307. [CrossRef ]
22. Cho SD, Rajitrangson P, Matis BA, Platt JA. Effect of Er,Cr:YSGG laser, air abrasion, and silane application on repaired shear bond strength of composites. Oper Dent 2013; 38: 1-9. [CrossRef ]
23. Ozcan M, Cura C, Brendeke J. Effect of aging conditions on the repair bond strength of a microhybrid and a nanohybrid resin composite. J Adhes Dent 2010; 12: 451-9.
24. Tsujimoto A, Barkmeier WW, Takamizawa T, Latta MA, Miyazaki M. Depth of cure, flexural properties and volumetric shrinkage of low and high viscosity bulk-fill giomers and resin composites. Dent Ma-ter J 2017; 36: 205-13.[CrossRef ]
25. Gamarra VSS, Borges GA, Júnior LHB, Spohr AM. Marginal adaptation and microleakage of a bulk-fill composite resin photopolymerized with different techniques. Odontology. 2018; 106: 56-63. [CrossRef ]
26. Van Ende A, De Munck J, Lise DP, Van Meerbeek B. Bulk-fill compos-ites: a review of the current literature. J Adhes Dent 2017; 19: 95-109.
27. Roulet JF, Degrange M. Composite resin restorations on posterior teeth, in Adhesion: The Silent Revolution in Dentistry. Chicago Quin-tessence, 2000, p. 253.
28. Sarkar NK. Internal corrosion in dental composite wear. J Biomed Mater Res 2000; 53: 371-80.[CrossRef ]
29. Sideridou T, Achilias DS, Kyrikou E. Thermal expansion characteris-tics of light-cured dental resins and resin composites. Biomaterials 2004; 25: 3087-97. [CrossRef ]
30. Tezvergil A, Lassila LV, Vallittu PK. Composite-composite repair bond strength: effect of different adhesion primers. J Dent 2003; 31: 521-5. [CrossRef ]
31. Brosh T, Bichacho N, Blutstein R. Effect of combinations of surface treatments and bonding agents on the bond strength of repaired composites. J Prosthet Dent 1997; 77: 122-6.[CrossRef ]