Anıl RIDVANOĞULLARI, Tayfun ÇETİN, Mehmet AKKAŞ

EXPERIMENTAL INVESTIGATION OF THE MECHANICAL AND MICROSTRUCTURE PROPERTIES OF S49 RAIL STEEL

ISSN: 2536-5010
Yayın Aralığı: Yılda 2 Sayı
Başlangıç: 2011
Yayıncı: Hibetullah KILIÇ

This study was carried out to determine the microstructure and mechanical properties of S49 rail steel. For this purpose, firstly, three samples of S49 rail steel material were prepared by cutting by wire erosion method for three point bending test. Microstructural analyzes of S49 rail steel were examined by scanning electron microscopy (SEM). Energy dispersion spectrometer (EDS) analysis was performed to determine the chemical composition of the S49 rail steel material. Hardness test and three point bending test were performed to determine the mechanical properties of the samples. SEM and EDS analyzes of fractured surfaces were performed from the broken samples after the three point bending test.

Keywords:

S49 rail steel, Mechanical properties, Three point bending,

PDF

___

Referans1: Vural, D., Gencer, C. and Karadoğan, D. (2014). Ulaştırma uygulamalarına yönelik çok modlu model önerisi. Savunma Bilimleri Dergisi, 13(1), pp. 75-105.
Referans2: Çetin, T. and Akkaş, M. (2020). Effect of WC Reinforced on Microstructure and Mechanical Properties of CuAlMn Alloys Produced by Hot Pressing Method. European Journal of Technique, 10(1), pp. 173-183.