Kinetics of Granulated Waste Tyre Pyrolysis via Thermogravimetry and Model-Free Methods

Kinetics of Granulated Waste Tyre Pyrolysis via Thermogravimetry and Model-Free Methods

There has been an increase in global consumption of waste tyres over the years. However only a portion of the total amount of waste tyres can be recycled or reused for other applications. Land-filling has been considered an alternative to address the problem of continued waste tyres accumulation, but huge space is needed for this and the reusable resources are wasted. This therefore has led to environmental and economic problem of disposal of the large mass of waste tyres. Waste tyre pyrolysis, which is the thermal decomposition in absence of oxygen, can be used to recover both energy and material. Thermogravimetric analysis (TGA) is the technique commonly used to evaluate the weight loss kinetics associated with the vaporisation of materials during pyrolysis. The purpose of this study was to establish the kinetics of thermal degradation of waste tyres by TGA and to compare the activation energies (E) obtained using two model-free methods. The experiments were carried out in a nitrogen environment and a temperature range of 20°C to 600°C  at three heating rates. Results show that the pyrolysis process of the tyre crumb occurs in three stages as the various components of the tyre undergo decomposition. A mean activation energy of approximately 232 kJmol-1 was obtained using the two models.

___

  • [1] Y. Su and B. Zhao, "Pyrolysis of waste tire powder and its comparison with Shenhua coal," in Energy and Environment Technology, 2009. ICEET'09. International Conference on, 2009, pp. 262-265.
  • [2] Y. Su and W. Deng, "A thermogravimetric study of waste tire powder," in E-Product E-Service and E-Entertainment (ICEEE), 2010 International Conference on, 2010, pp. 1-4.
  • [3] G. Lopez, R. Aguado, M. Olazar, M. Arabiourrutia, and J. Bilbao, "Kinetics of scrap tyre pyrolysis under vacuum conditions," Waste Management, vol. 29, pp. 2649-2655, 2009.
  • [4] F. A. López, T. A. Centeno, F. J. Alguacil, and B. Lobato, "Distillation of granulated scrap tires in a pilot plant," Journal of Hazardous Materials, vol. 190, pp. 285-292, 2011.
  • [5] I. de Marco Rodriguez, M. F. Laresgoiti, M. A. Cabrero, A. Torres, M. J. Chomón, and B. Caballero, "Pyrolysis of scrap tyres," Fuel Processing Technology, vol. 72, pp. 9-22, 2001.
  • [6] D. Y. C. Leung and C. L. Wang, "Kinetic study of scrap tyre pyrolysis and combustion," Journal of Analytical and Applied Pyrolysis, vol. 45, pp. 153-169, 1998.
  • [7] S. Seidelt, M. Müller-Hagedorn, and H. Bockhorn, "Description of tire pyrolysis by thermal degradation behaviour of main components," Journal of Analytical and Applied Pyrolysis, vol. 75, pp. 11-18, 2006.
  • [8] A. Anca-Couce, A. Berger, and N. Zobel, "How to determine consistent biomass pyrolysis kinetics in a parallel reaction scheme," Fuel, vol. 123, pp. 230-240, 2014.
  • [9] S. Vyazovkin and D. Dollimore, "Linear and nonlinear procedures in isoconversional computations of the activation energy of nonisothermal reactions in solids," Journal of chemical information and computer sciences, vol. 36, pp. 42-45, 1996.
  • [10] É. de Godois Baroni, K. Tannous, Y. J. Rueda-Ordóñez, and L. K. Tinoco-Navarro, "The applicability of isoconversional models in estimating the kinetic parameters of biomass pyrolysis," Journal of Thermal Analysis and Calorimetry, vol. 123, pp. 909-917, 2016.
  • [11] H. L. Friedman, "Kinetics of thermal degradation of char‐forming plastics from thermogravimetry. Application to a phenolic plastic," in Journal of Polymer Science: Polymer Symposia, 1964, pp. 183-195.
  • [12] H. E. Kissinger, "Reaction kinetics in differential thermal analysis," Analytical chemistry, vol. 29, pp. 1702-1706, 1957.
  • [13] T. Akahira and T. Sunose, "Joint convention of four electrical institutes," Res Rep Chiba Inst Technol, vol. 16, pp. 22-31, 1971.
European Journal of Engineering and Natural Sciences-Cover
  • Başlangıç: 2015
  • Yayıncı: CNR Çevre
Sayıdaki Diğer Makaleler

Investigation of Notch Root Strain Behaviors Under Combined Loadings

Toros Arda AKSEN, Emre ESENER, Mehmet FIRAT

Wastewater Treatment by Floating Macrophytes (Salvinia Natans) Under Algerian Semi-Arid Climate

Laabassi AYACHE, Boudehane ASMA

Kinetics of Granulated Waste Tyre Pyrolysis via Thermogravimetry and Model-Free Methods

Peter T. CHEROP, Sammy L. KİAMBİ, Paul MUSONGE

The Investigation and Comparison of Friction Stir Spot Welding and Electrical Resistance Spot Welding of AA2024 Aluminium Alloy Joints

Yahya BOZKURT, Adnan TÜRKER, Gamze SOYTEMİZ, Serdar SALMAN

The Usage of Modified Chitosan for the Removal of Hexavalent Chromium from Waste Water

Nuran DEVECİ AKSOY

Development of Ecological Biodesign Products by Bacterial Biocalcification

Tuğba Keskin Gündoğdu, İrem DENİZ, Alpcan ARİC, Burak Talha YILMAZSOY, Ozge ANDİC CAKİR, Aysegul ERDOGAN, Didem ALTUN, Ayca TOKUC, Burcu Filiz DEMİRCİ, Aylin SENDEMİR, Gulden KOKTURK, Feyzal Ozkaban

An Alternative Method for Long-Term Land Cover Change Detection: A Case Study of Hasanlar Dam

Firat Caglar Yilmaz, Sukran Sahin

Investigation of Heat Transfer from Heated Square Patterned Surfaces in a Rectangular Channel with an Air Jet Impingement

Koray KARABULUT, Dogan Engin ALNAK, Ferhat KOCA

Generation of a Multi-Layered Diffusion Coating on an Interstitial-Free Steel

Fikri Erdem Şeşen, Ömer Serdar Özgen

Determination of The Hip Stem Loosening Using Vibration Method

Talip ÇELİK, Yasin KİSİOGLU