Suna AVCIOĞLU

32083

FABRICATION OF A NOVEL FeB-B4C COMPOSITE POWDER AND EVALUATING ITS POTENTIAL FOR ENERGY STORAGE APPLICATIONS

The development of energy storage devices is critical for humanity to declare its independence from fossil fuels. Supercapacitors and batteries are rapidly growing technologies. Nevertheless, their current progress is still insufficient to meet global demand. Therefore, advances in new generation and tailored materials for energy storage applications are urgently needed. Herein, for the first time, a novel composite of FeB-B4C powder was synthesized by a one-pot sol-gel technique, and its potential as an active material for electrodes in energy storage devices was investigated. The phase analysis showed that a composite powder containing 91±5% B4C and 9±5% FeB was obtained without unwanted excess phases such as graphite, boron, or iron oxide. Scanning electron microscopy images of the composite powder revealed the formation of elongated boron carbide particles connected with spherical iron boride ones. The size of the boron carbide particles was found to be in the range of 1 to 10 µm, while the iron boride particles were formed in the submicron range. The synthesized composite's electrochemical properties were investigated using a three-electrode set-up. Cyclic voltammetry (CV) and galvanostatic charge/discharge tests (GCD) were employed. The results obtained indicate the pseudocapacitive behavior of the electrodes with a specific capacitance of 8.28 F/g.
Anahtar Kelimeler:

Iron boride, Boron carbide, Composite, Energy storage, Supercapacitor

FABRICATION OF A NOVEL FeB-B4C COMPOSITE POWDER AND EVALUATING ITS POTENTIAL FOR ENERGY STORAGE APPLICATIONS

The development of energy storage devices is critical for humanity to declare its independence from fossil fuels. Supercapacitors and batteries are rapidly growing technologies. Nevertheless, their current progress is still insufficient to meet global demand. Therefore, advances in new generation and tailored materials for energy storage applications are urgently needed. Herein, for the first time, a novel composite of FeB-B4C powder was synthesized by a one-pot sol-gel technique, and its potential as an active material for electrodes in energy storage devices was investigated. The phase analysis showed that a composite powder containing 91±5% B4C and 9±5% FeB was obtained without unwanted excess phases such as graphite, boron, or iron oxide. Scanning electron microscopy images of the composite powder revealed the formation of elongated boron carbide particles connected with spherical iron boride ones. The size of the boron carbide particles was found to be in the range of 1 to 10 µm, while the iron boride particles were formed in the submicron range. The synthesized composite's electrochemical properties were investigated using a three-electrode set-up. Cyclic voltammetry (CV) and galvanostatic charge/discharge tests (GCD) were employed. The results obtained indicate the pseudocapacitive behavior of the electrodes with a specific capacitance of 8.28 F/g.
Keywords:

Iron boride, Boron carbide, Composite, Energy storage, Supercapacitor,

PDF

___

  • [1] Zandalinas SI, Fritschi FB, Mittler R. Global Warming, Climate Change, and Environmental Pollution: Recipe for a Multifactorial Stress Combination Disaster. Trends in Plant Science 2021;26(6):588–99.
  • [2] Simons S, Schmitt J, Tom B, Bao H, Pettinato B, Pechulis M. Chapter 10 - Advanced concepts. In: Brun K, Allison T, Dennis R (editors). Thermal, mechanical, and hybrid chemical energy storage systems. London: Academic Press, an imprint of Elsevier; 2021. p. 569–96.
  • [3] Olabi AG, Abbas Q, Al Makky A, Abdelkareem MA. Supercapacitors as next generation energy storage devices: Properties and applications. Energy 2022;248:123617.
  • [4] Sanger A, Kumar A, Kumar A, Jain PK, Mishra YK, Chandra R. Silicon Carbide Nanocauliflowers for Symmetric Supercapacitor Devices. Ind. Eng. Chem. Res. 2016;55(35):9452–8.
  • [5] Liu W, Soneda Y, Kodama M, Yamashita J, Hatori H. Low-temperature preparation and electrochemical capacitance of WC/carbon composites with high specific surface area. Carbon 2007;45(14):2759–67.
  • [6] Halim J, Kota S, Lukatskaya MR, Naguib M, Zhao M-Q, Moon EJ, Pitock J, Nanda J, May SJ, Gogotsi Y, Barsoum MW. Synthesis and Characterization of 2D Molybdenum Carbide (MXene). Adv. Funct. Mater. 2016;26(18):3118–27.
  • [7] Shiota I, Miyamoto Y (editors). Functionally grated materials 1996. Amsterdam: Elsevier; 1997.
  • [8] Avcıoğlu S, Kaya F, Kaya C. Morphological evolution of boron carbide particles: Sol-gel synthesis of nano/micro B4C fibers. Ceramics International 2021;47(19):26651–67.
  • [9] Song S, Yu L, Ruan Y, Sun J, Chen B, Xu W, Zhang J-G. Highly efficient Ru/B4C multifunctional oxygen electrode for rechargeable Li O2 batteries. Journal of Power Sources 2019;413:11–9.
  • [10] Song S, Xu W, Zheng J, Luo L, Engelhard MH, Bowden ME, Liu B, Wang C-M, Zhang J-G. Complete Decomposition of Li2CO3 in Li-O2 Batteries Using Ir/B4C as Noncarbon-Based Oxygen Electrode. Nano Lett 2017;17(3):1417–24.
  • [11] Song N, Gao Z, Zhang Y, Li X. B4C nanoskeleton enabled, flexible lithium-sulfur batteries. Nano Energy 2019;58:30–9.
  • [12] Wang H, Ma C, Yang X, Han T, Tao Z, Song Y, Liu Z, Guo Q, Liu L. Fabrication of boron-doped carbon fibers by the decomposition of B4C and its excellent rate performance as an anode material for lithium-ion batteries. Solid State Sciences 2015;41:36–42.
  • [13] Luo W-B, Chou S-L, Wang J-Z, Liu H-K. A B 4 C nanowire and carbon nanotube composite as a novel bifunctional electrocatalyst for high energy lithium oxygen batteries. J. Mater. Chem. A 2015;3(36):18395–9.
  • [14] Luo L, Chung S-H, Yaghoobnejad Asl H, Manthiram A. Long-Life Lithium-Sulfur Batteries with a Bifunctional Cathode Substrate Configured with Boron Carbide Nanowires. Adv Mater 2018;30(39):e1804149.
  • [15] Chang Y, Sun X, Ma M, Mu C, Li P, Li L, Li M, Nie A, Xiang J, Zhao Z, He J, Wen F, Liu Z, Tian Y. Application of hard ceramic materials B4C in energy storage: Design B4C@C core-shell nanoparticles as electrodes for flexible all-solid-state micro-supercapacitors with ultrahigh cyclability. Nano Energy 2020;75:104947.
  • [16] Avcıoğlu S, Buldu-Akturk M, Erdem E, Kaya F, Kaya C. Boron Carbide as an Electrode Material: Tailoring Particle Morphology to Control Capacitive Behaviour. Materials (Basel) 2023;16(2).
  • [17] Avcıoǧlu C, Avcıoǧlu S, Bekheet MF, Gurlo A. Photocatalytic Overall Water Splitting by SrTiO 3 Progress Report and Design Strategies. ACS Appl. Energy Mater. 2023;6(3):1134–54.
  • [18] Avcıoğlu C, Avcıoğlu S, Bekheet MF, Gurlo A. Solar hydrogen generation using niobium-based photocatalysts: design strategies, progress, and challenges. Materials Today Energy 2022;24:100936.
  • [19] Wang D, Song Y, Zhang H, Yan X, Guo J. Recent advances in transition metal borides for electrocatalytic oxygen evolution reaction. Journal of Electroanalytical Chemistry 2020;861:113953.
  • [20] Yang HX, Wang YD, Ai XP, Cha CS. Metal Borides: Competitive High Capacity Anode Materials for Aqueous Primary Batteries. Electrochem. Solid-State Lett. 2004;7(7):A212.
  • [21] Zhang L, Chai S-S, Zhang W-B, Guo S-B, Han X-W, Guo Y-W, Bao X, Ma X-J. Cobalt boride on clay minerals for electrochemical capacitance. Applied Clay Science 2022;218:106416.
  • [22] Li J, Lin H, Chen Y, Su Q, Huang Q. The effect of iron oxide on the formation of boron nitride nanotubes. Chemical Engineering Journal 2011;174(2-3):687–92.
  • [23] Kriegesmann J. 2.04 - Processing of Silicon Carbide-Based Ceramics. In: Sarin VK, Mari D, Llanes L, Nebel CE (editors). Comprehensive hard materials. Amsterdam, Waltham: Elsevier; 2014. p. 89–175.
  • [24] Avcıoğlu S, Buldu M, Kaya F, Kaya C. Chapter 20 - Synthesis of nuclear-grade nano-sized boron carbide powders and its application in LDPE matrix composites for neutron shielding. In: Low I-M, Dong Y (editors). Composite materials: Manufacturing, properties, and applications. Amsterdam, Netherlands: Cambridge, MA; Elsevier; 2021. p. 543–79.
  • [25] Avcıoğlu S, Buldu M, Kaya F, Üstündağ CB, Kam E, Menceloğlu YZ, Kaptan HY, Kaya C. Processing and properties of boron carbide (B4C) reinforced LDPE composites for radiation shielding. Ceramics International 2020;46(1):343–52.
  • [26] Avcioglu S, Kaya F, Kaya C. Effect of elemental nano boron on the transformation and morphology of boron carbide (B4C) powders synthesized from polymeric precursors. Ceramics International 2020;46(11):17938–50.
  • [27] Ramachandran R, Xuan W, Zhao C, Leng X, Sun D, Luo D, Wang F. Enhanced electrochemical properties of cerium metal-organic framework based composite electrodes for high-performance supercapacitor application. RSC Adv 2018;8(7):3462–9.
  • [28] Hadji F, Omari M, Mebarki M, Gabouze N, Layadi A. Zinc doping effect on the structural and electrochemical properties of LaCoO3 perovskite as a material for hybrid supercapacitor electrodes. Journal of Alloys and Compounds 2023;942:169047.
  • [29] Yavuz A, Ozdemir N, Erdogan PY, Zengin H, Zengin G, Bedir M. Nickel-based materials electrodeposited from a deep eutectic solvent on steel for energy storage devices. Appl. Phys. A 2019;125(8):1–10.
Eskişehir Technical University Journal of Science and Technology A - Applied Sciences and Engineering-Cover
  • ISSN: 2667-4211
  • Yayın Aralığı: Yılda 4 Sayı
  • Başlangıç: 2000
  • Yayıncı: Eskişehir Teknik Üniversitesi
Arşiv
Sayıdaki Diğer Makaleler

THE USE OF COX REGRESSION MODEL IN THE SURVIVAL ANALYSIS FOR LEUKEMIA PATIENTS IN THE REPUBLIC OF YEMEN

Elıas Abdullah AL-SAMAI, Sevil ŞENTÜRK

Q-HOMOTOPY SHEHU ANALYSIS TRANSFORM METHOD OF TIME-FRACTIONAL COUPLED BURGERS EQUATIONS

Umut BEKTAŞ, Halil ANAÇ

FABRICATION OF A NOVEL FeB-B4C COMPOSITE POWDER AND EVALUATING ITS POTENTIAL FOR ENERGY STORAGE APPLICATIONS

Suna AVCIOĞLU

ENHANCEMENT OF HEAT TRANSFER WITH VISCOUS DISSIPATION IMPACT ON FLUID FLOW PAST A MOVING WEDGE IN A PERMEABLE DOMAIN

Uchenna UKA, Innocent EMEZIEM, Semiu AYİNDE, Charles ADENIKA, Kelvin AGBO