Betonarmede Donatı Ve Beton Arasındaki Aderansa Korozyonun Etkisi
Bu çalışmada üç farklı çimento ile 300
ve 375 dozajlarında, katkısız ve % 10 ve 20 oranlarında F tipi uçucu kül (UK)
katkılı beton karışımları hazırlanmış, 28. ve 180. günler için toplam 36 farklı
seri üretim yapılmıştır. Üretilen
ile ilişkisinin olmadığı ve korozyon nedeniyle hasara uğrayan numunelerde aderans dayanımının çok yüksek oranlarda düştüğü görülmüştür.
bu betonların mekanik özelikleri belirlenmiş,
ayrıca beton içine donatıların yerleştirildiği betonarme elemanlar üretilmiş,
bu numunelerde hızlandırılmış korozyon deneyleri yapılmış ve sonrasında aderans
deneyleri yapılarak korozyon nedeniyle beton ile donatı arasındaki aderans değişimleri
belirlenmiştir. Deneyler sonucunda aderans dayanımının beton kalitesi ile ilişkisinin
olmadığı ve korozyon nedeniyle hasara uğrayan numunelerde aderans dayanımının çok
yüksek oranlarda düştüğü görülmüştür.
Effect Of Corrosion On Adherence Between Reinforcement And Concrete For Reinforced Concrete
In this study, concrete mixtures are prepared incorporating three
different types of cement in 300 and 375 kg/m3 dosages and also 10-20 % F type fly
ash (FA) replacement to cement, 36 different series are produced for tests after 28
and 180 days. Mechanical properties of these concrete types are determined.
Besides, reinforced concrete specimens are also produced, accelerated corrosion
test is conducted and after then adherence variations between concrete and
reinforcement due to corrosion are determined by conducting adherence tests. As a
result of tests, it is seen that there is no relation between bond strength and concrete
quality, and bond strength of damaged specimens due to corrosion decrease in high
ratios.
___
- [1] C. Karakoç, “Aderans Mekanik Etkilesim Olayı”, ĐTÜ Mimarlık Fakültesi
Baskı Atölyesi, 1985.
- [2] B. Baradan, H. Yazıcı ve H. Ün, “Betonarme Yapılarda Kalıcılık (Durabilite)”,
Ecem Ofset Matbaacılık, 282s, 2002.
- [3] F. Pruckner and O. E. Gjørv, “Effect of CaCl2 and NaCl additions on concrete
corrosivity”, Cement and Concrete Research, Vol.34, pp. 1209-1217, 2004.
- [4] W. Yeih and J. J. Chang, “A study on the efficiency of electrochemical
realkalisation of carbonated concrete”, Construction and Building Materials,
Vol.19, pp. 516-524, 2005.
- [5] Đ. Türkmen and M. Gavgalı, “Influence of mineral admixture on the some
properties and corrosion of steel embedded in sodium sulfate solution of
concrete”, Materials Letters, Vol.57, pp. 3222-3233, 2003.
- [6] E. Güneyisi, T. Özturan and M. Gesoğlu, “A study on reinforcement corrosion
and related properties of plain and blended cement concretes under different
curing conditions”, Cement and Concrete Composites, Vol.27, pp. 449-461,
2005.
- [7] K. Y. Yeau and E. K. Kim, “An experimental study on corrosion resistance of
concrete with ground granulate blast-furnace slag”, Cement and Concrete
Research, Vol.35, pp. 1391-1399, 2005.
- [8] S. Erdoğdu, I. L. Kondratova and T. W. Bremner, “Determination of chloride
diffusion coefficient of concrete using open-circuit potential measurements”,
Cement and Concrete Research, Vol.34, pp. 603-609, 2004.
- [9] A. Cheng, R. Huang, J. K. Wu, and C. H. Chen, “Influence of GGBS on
durability and corrosion behavior of reinforced concrete”, Materials Chemistry
and Physics, Vol.93, pp. 404-411, 2005.
- [10] A. Cheng, R. Huang, J. K. Wu, and C. H. Chen, “Effect of rebar coating on
corrosion resistance and bond strength of reinforced concrete”, Construction
and Building Materials, Vol.19, pp. 404-412, 2005.
- [11] H. S. Lee, T. Noguchi and F. Tomosawa, “Evaluation of the bond properties
between concrete and reinforcement as a function of the degree of
reinforcement corrosion”, Cement and Concrete Research, Vol.32, pp. 1313-
1318, 2002.
- [12] S. Muralidharan, V. Saraswathy, S. P. Merlin Nima, N. Palaniswamy,
“Evaluation of a composite corrosion inhibiting admixtures and its
performance in portland pozzolana cement”, Materials Chemistry and Physics,
Vol.86, pp. 298-306, 2004.
- [13] N. Yüzer, “Betonarme yapılarda korozyon ölçüm yöntemleri ve hasar tespiti”,
Türkiye Mühendislik Haberleri, Sayı:426, ss. 134-138, 2003.
- [14] N. Girit, “Korozyon inhibitörleri”, Türkiye Mühendislik Haberleri, Sayı: 426,
ss. 139-141, 2003.
- [15] J. M. R. Dotto, A.G. de Abreu, D. C. Dal Molin, I. L. Müller, “Influence of
silica fume addition on concretes physical properties and on corrosion
behaviors of reinforcement bars”, Cement and Concrete Composites, Vol.26,
pp. 31-39, 2004.
- [16] N. Yüzer ve F. Aköz, “Donatı Korozyonunun Hızlandırılmıs Deney Yöntemi
ile Arastırılması”, 5. Ulusal Beton Kongresi, 1-3 Ekim 2003, Đstanbul, ss. 237-
246.
- [17] Đ. B. Topçu, A. R. Boğa, “Uçucu Küllü Betonlarda Donatı Korozyonunun
Hızlandırılmıs Yöntem ile Arastırılması”, 3. Ulusal Yapı Malzemesi Kongresi
ve Sergisi, 15-17 Kasım 2006, ĐTÜ Taskısla 109 No’lu Salon, Đstanbul, ss.132-
143.
- [18] Đ. B. Topçu, “Yapı Malzemesi ve Beton”, Uğur Ofset, Eskisehir, 2006.
- [19] M. M. Al-Zahrani, S. U. Al-Dulaijan, M. Ibrahim, H. Saricimen and F. M.
Sharif, “Effect of waterproofing coatings on steel reinforcement corrosion and
physical properties of concrete”, Cement and Conc. Composite, Vol.24, pp.
127-137, 2002.
- [20] Đ. B. Topçu, A. R. Boğa, “Uçucu Küllü Betonlarda Donatı Korozyonunun
Aderans Dayanımına Etkisi”, ACE 2006, 7th International Congress in Civil
Engineering, October 11-13, 2006, Yıldız Technical University, Đstanbul,
Turkey, Book of Abstracts, p. 455.
- [21] M. H. Özkul, M. Mutlu ve A. R. Sağlam, “Beton ankrajları”, Sika Teknik
Bülten, Sayı: 2001/4, ss. 1-11, 2001.
- [22] R. A. Cook, R. C. Konz, “Factors influencing bond strength of adhesive
anchors”, ACI Structural Journal, Vol.98, No. 1, pp. 76-86, 2001.