___

• 1. O. Baran, A. Keles, H. Cicek, Y. Totik, and I. Efeoglu: 'The mechanical and tribological properties of Ti Nb, V N films on the Al-2024 alloy', Surf. Coat. Technol., 2017, 332, 312-318.2. J. Stallard, S. Poulat, and D. G. Teer: 'The study of the adhesion of a TiN coating on steel and titanium alloy substrates using a multi-mode scratch tester', Tribol. Int., 2006, 39(2), 159-166.3. A. Bloyce, P. Y. Qi, H. Dong, and T. Bell: 'Surface modification of titanium alloys for combined improvements in corrosion and wear resistance', Surf. Coat. Technol., 1998, 107(2-3), 125-132.4. F. Bidev, O. Baran, E. Arslan, Y. Totik, and I. Efeoglu: 'Adhesion and fatigue properties of Ti/TiB2/MoS2 graded-composite coatings deposited by closed-field unbalanced magnetron sputtering', Surf. Coat. Technol., 2013, 215, 266-271.5. C. Montero-Ocampo, E. A. Ramirez-Ceja, and J. A. Hidalgo-Badillo: 'Effect of codeposition parameters on the hardness and adhesion of TiVN coatings', Ceramics International, 2015, 41(9), 11013-11023.6. B. A. Latella, B. K. Gan, K. E. Daviesb, D. R. McKenzie, and D. G. McCulloch: 'Titanium nitride/vanadium nitride alloy coatings: mechanical properties and adhesion characteristics', Surf. Coat. Technol., 2006, 200(11), 3605-3611.7. A. Keles, H. Cicek, O. Baran, Y. Totik, and I. Efeoglu: 'Determining the critical loads of V and Nb doped ternary TiN-based coatings deposited using CFUBMS on steels', Surf. Coat. Technol., 2017, 332, 168-173.8. I. Grimberg, V. N. Zhitomirsky, R. L. Boxman, S. Goldsmith, and B. Z. Weiss: 'Multicomponent Ti-Zr-N and Ti-Nb-N coatings deposited by vacuum arc', Surf. Coat. Technol., 1998, 108(1-3), 154-159.9. V. Y. Fominski, S. N. Grigoriev, J. P. Celis, R. I. Romanov, and V. B. Oshurko: 'Structure and mechanical properties of W-Se-C/diamond-like carbon and W-Se/diamond-like carbon bi-layer coatings prepared by pulsed laser deposition', Thin Solid Films, 2012, 520(21), 6476-6483.10. Y. Alajlani, F. Placido, D. Gibson, H. O. Chu, S. G. Song, L. Porteous, and S. Moh: 'Nanostructured ZnO films prepared by hydro-thermal chemical deposition and microwave-activated reactive sputtering', Surf. Coat. Technol., 2016, 290, 16-20.11. F. Movassagh-Alanagh, A. Abdollah-Zadeh, M. Aliofkhazraei, and M. Abedi: 'Improving the wear and corrosion resistance of Ti-6Al-4V alloy by deposition of TiSiN nanocomposite coating with pulsed-DC PACVD', Wear, 2017, 390-391, 93-103.12. F. X. Ye and X. Sun: 'Nanoindentation response analysis of TiN-Cu coating deposited by magnetron sputtering', Progress in Natural Science-Materials International, 2018, 28(1), 40-44.13. P. J. Kelly and R. D. Arnell: 'Magnetron sputtering: a review of recent developments and applications', Vacuum, 2000, 56(3), 159-172.14. L. Kara, T. Kucukomeroglu, O. Baran, I. Efeoglu, and K. Yamamoto: 'Microstructure, Mechanical, and Scratch Resistance Properties of TiAlCrNbN-Graded Composite Coating Deposited on AISI H13 Steel Substrate with Pulsed DC Closed Field Unbalanced Magnetron Sputtering Method', Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science, 2014, 45A(4), 2123-2131.15. S. Gangopadhyay, R. Acharya, A. K. Chattopadhyay, and S. Paul: 'Effect of substrate bias voltage on structural and mechanical properties of pulsed DC magnetron sputtered TiN-MoSx composite coatings', Vacuum, 2010, 84(6), 843-850.16. A. D. Pogrebnjak, A. A. Bagdasaryan, V. M. Beresnev, U. S. Nyemchenko, V. I. Ivashchenko, Y. O. Kravchenko, Z. K. Shaimardanov, S. V. Plotnikov, and O. Maksakova: 'The effects of Cr and Si additions and deposition conditions on the structure and properties of the (Zr-Ti-Nb)N coatings', Ceramics International, 2017, 43(1), 771-782.17. L. Sadowski, J. Hola, S. Czarnecki, and D. H. Wang: 'Pull-off adhesion prediction of variable thick overlay to the substrate', Automation in Construction, 2018, 85, 10-23.18. Q. W. Qiu and D. V. Lau: 'A novel approach for near-surface defect detection in FRP-bonded concrete systems using laser reflection and acoustic-laser techniques', Construction and Building Materials, 2017, 141, 553-564.19. J. K. Du, B. R. Tittmann, and H. S. Ju: 'Evaluation of film adhesion to substrates by means of surface acoustic wave dispersion', Thin Solid Films, 2010, 518(20), 5786-5795.20. Y. Fizi, Y. Mebdoua, H. Lahmar, S. Djeraf, and S. Benbahouche: 'Adhesion of FeCrNiBSi-(W-Ti)C wire-arc deposited coatings onto carbon steel substrates determined by indentation measurements and modeling', Surf. Coat. Technol., 2015, 268, 310-316.21. O. S. Heavens: 'Some factors influencing the adhesion of films produced by vacuum evaporation', Journal de Physique et le Radium, , 1950, 11, 355-360.22. S. J. Bull and D. S. Rickerby: 'MULTI-PASS SCRATCH TESTING AS A MODEL FOR ABRASIVE WEAR', Thin Solid Films, 1989, 181, 545-553.23. F. Yildiz and A. Alsaran: 'Multi-pass scratch test behavior of modified layer formed during plasma nitriding', Tribol. Int., 2010, 43(8), 1472-1478.24. J. von Stebut: 'Multi-mode scratch testing - a European standards, measurements and testing study', Surf. Coat. Technol., 2005, 200(1-4), 346-350.25. G. A. Rodriguez-Castro, R. C. Vega-Moron, A. Meneses-Amador, H. W. Jimenez-Diaz, J. A. Andraca-Adame, I. E. Campos-Silva, and M. E. P. Pardave: 'Multi-pass scratch test behavior of AISI 316L borided steel', Surf. Coat. Technol., 2016, 307, 491-499.26. I. Efeoglu and R. D. Arnell: 'Multi-pass sub-critical load testing of titanium nitride coatings', Thin Solid Films, 2000, 377, 346-353.27. K. V. Ezirmik and S. Rouhi: 'Influence of Cu additions on the mechanical and wear properties of NbN coatings', Surf. Coat. Technol., 2014, 260, 179-185.28. J. Musil: 'Hard and superhard nanocomposite coatings', Surf. Coat. Technol., 2000, 125(1-3), 322-330.29. S. Veprek and S. Reiprich: 'A concept for the design of novel superhard coatings', Thin Solid Films, 1995, 268(1-2), 64-71.30. R. Jacobs, J. Meneve, G. Dyson, D. G. Teer, N. M. Jennett, P. Harris, J. von Stebut, C. Comte, P. Feuchter, A. Cavaleiro, H. Ronkainen, K. Holmberg, U. Beck, G. Reiners, and C. D. Ingelbrecht: 'A certified reference material for the scratch test', Surf. Coat. Technol., 2003, 174, 1008-1013.31. G. A. Gogotsi: 'Criteria of ceramics fracture (edge chipping and fracture toughness tests)', Ceramics International, 2013, 39(3), 3293-3300.32. A. C. FischerCripps and B. R. Lawn: 'Stress analysis of contact deformation in quasi-plastic ceramics', Journal of the American Ceramic Society, 1996, 79(10), 2609-2618.33. S. Kataria, N. Kumar, S. Dash, R. Ramaseshan, and A. K. Tyagi: 'Evolution of deformation and friction during multimode scratch test on TiN coated D9 steel', Surf. Coat. Technol., 2010, 205(3), 922-927.