MANYETİK MALZEMELERDEKİ ÇATLAKLARIN FİZİKSEL ÖZELLİKLERİNİN BELİRLENMESİ

Endüstriyel uygulamalarda kullanılan manyetik malzemelerdeki çatlakların fiziksel özelliklerinin belirlenmesi için bir manyetik tahribatsız test sistemi geliştirilmiştir. Araştırılan örnekler frekansı f=1000Hz ve akım değeri I=0.8A olan AC akımla manyetize edilmiştir. Örneklerin çatlak bölgesinin yüzeyi üç boyutta taranmıştır. Tarama esnasında yüzey manyetik kaçak akı sinyalleri Hall etkili algılayıcıyla toplanmıştır. Toplanan veriler çatlağın fiziksel özelliklerinin belirlenmesi için analiz edilmiştir. Bu makalede çatlakların fiziksel özellikleri hakkındaki bulgular ayrıntılı olarak bahsedilecektir.

Anahtar Kelimeler:

Manyetik Tahribatsız Test Sistemi, Çatlak, Manyetik Kaçak Akı

INSPECTION OF CRACKS ON MAGNETIC MATERIALS

A magnetic non-destructive testing system was constructed for the inspection of cracks on magnetic materials for industrial applications. Investigated samples were magnetized by an ac current of f=1000Hz and I=0.8A. The surface of the samples were scanned for three dimensions. During the scanning process, the signal of surface magnetic leakege flux was collected by using a Hall effect sensor. The collected data was analized to obtain feature of the cracks on the sample. In this paper, findings about feature of the cracks will be presented.

Keywords:

Magnetic Non-destructive Testing System, Crack, Magnetic Leakage Flux,

PDF

___

Üstüner, A., İmalat Tekniğinden Kaynaklanan Hatalar, Ankara, 1981.
Ekinci, Ş., Tahribatsız Test, Ultrasonik - Seviye I, Ç.N.A.E.M. Endüstriyel Uygulama Notları, İstanbul, 1990.
Bubenik, T.A., Nesdroth, J.B., Eiber, R.J., Saffell, B.F.,Magnetic flux leakage (MFL) technology for natural gas pipeline inspection, NDT & E International, Volume 31, Issue 5, 379, 1998.
Crouch, A.E., Beissner, R.E., Burkhardt, G.L, Creek, E.A., Grant, T.S., Magnetic flux leakage inspection of gas pipelines, NDT & E International, Volume 30, Issue 1, 31, 1997.
Katragadda, G., Lord, W., Sun, Y.S., Udpa, S., Udpa, L., Alternative magnetic flux leakage modalities for pipeline inspection, IEEE Transactions on Magnetics, Vol. 32, No. 3, 1581–1584, 1996.
Altschuler, E., Pignotti, A., Nonlinear model of flaw detection in steel pipes by magnetic flux leakage, NDT & E International, Volume 28, Issue 1, 35-40, 1995.
Porter, P.C., Use of magnetic flux leakage (MFL) for the inspection of pipelines and storage tanks, NDT & E International, Volume 30, Issue 1, 33, 1997.
Silk M. G., Ultrasonic Transducers for Nondestructive Testing, Adem Hilger Ltd., Bristol, 1984.
Cartz, L., Nondestructive Testing : Radiography, Ultrasonic, Liquid Penetrant, Magnetic Particle,Eddy Current, ASM Intl, 1988.
Prokhorenko, P., Migoun, N., Introduction in Theory of Penetrant Testing, Minsk: Science & Technology, Russian, 1988.
Beattie, A.G., Acoustic Emission, Principles and instrumentation, Journal of Acoustic Emission, 1983.
Hagemaier, D.J., Fundamentals of Eddy Current Testing, ASNT, 92, 1990, ISBN 0-931403-90-1
Göktepe, M., Ege, Y., Bayri, N. and Atalay, S., Non-destructive crack detection using GMI sensor, Phys. Stat. Sol.,12, 3436-3439, Almanya, 2004.
Paulsen, J.A., Jiles, D.C., A magnetic imaging system for evaluation of material onditions using magnetoresistive devices, IEEE Transactions on magnetics, 39, No. 5, 2003.
Park, G.S., Park, E.S., İmprovement of the sensor system in magnetic flux leakage-type nondestructive testing, IEEE Transactions on magnetics, 38, No. 2, 2002.
Gotoh, Y., and Takahashi, N., Study on problems in dedecting plural cracks by alternating flux leakage testing using 3-D nonlinear eddy current analysis, IEEE Transactions on magnetics, 39, No. 3, 2003.
Chady, T., Ekokizono, M., Todaka, T., Tsuchida, Y. And Sikora, R., A family of matrix type sensor for dedection of slight flaws in conducting plates, IEEE Transactions on magnetics, 35, No. 5, 1999.
Oka, M. and Enokizono, M., A detection of backside crack using rotational magnetic flux sensor with search coils, IEEE Transactions on magnetics, 32, No. 5, 1996.
Oka, M. and Enokizono, M., Evaluation of a reverse-side defect on stainless steel plates by the residual magnetic field method, IEEE Transactions on magnetics, 36, No. 5, 2000.