BSD TORNALAMADA İŞLEME HATALARI VE DÜZELTME STRATEJİLERİ ÜZERİNE BİR DERLEME ÇALIŞMASI

Bu çalışmada bilgisayar sayısal denetimli (BSD) tornalama işleminde iş parçası çapında ortaya çıkan boyutsal hatalar ve düzeltme stratejilerine ilişkin bir derleme çalışması sunulmuştur. İşleme hatalarının ortaya çıkışında kesme takımları, işleme şartları, tezgah hassasiyeti, iş parçası malzemesi ve geometrisi gibi birçok önemli faktör rol oynamaktadır. Düzeltme stratejileri ise Geometrik-ısıl, Geometrik adaptif kontrol ve Açık modüler olmak üzere üç ana model olarak gelişmiştir. Hata düzeltme çalışmalarının çoğunlukla Geometrik adaptif kontrol teknikleri üzerine yoğunlaştığı ve bu alanda önemli gelişmeler sağlandığı görülmekle birlikte sonuçların uygulanabilirliği halen istenilen düzeyde değildir. Açık modüler kontrol modeli ise kontrol ünitelerinin NT tabanlı işletim sistemli ve açık kontrol devreli olduğu durumlarda çok avantajlıdır. Bu durumda yeni nesil kontrol ünitelerinin açık çevrimli ve güncellenebilir Pc’lerden oluşmasının hata düzeltme çalışmalarında büyük gelişme sağlayacağı açıktır.

Anahtar Kelimeler:

İşleme hatası, BSD, Bilgisayar destekli imalat.

MACHINING ERRORS AND COMPENSATION STRATEGIES IN CNC TURNING: A REVIEW STUDY

In this study, a review of work done on machining errors and compensation strategies in CNC turning is presented. Many important factors like machining conditions and cutting tools, machine tool accuracy, workpiece materials etc. play role on the machining errors. The compensation strategies are arranged as three main model such as Geometric-thermal, Geometric adaptive control and Open modular control. The majority of error compensation studies is focused to Geometric adaptive control techniques. But applicability of these techniques is not at the desired level. The Open modular control model has some advantage in case of control units are open loop and have NT based operation system. Then it is clearly shown the error compensation techniques will be greatly improved if the new generation control units are open loop and updatable PCs.

Keywords:

Machining error, BSD, Computer aided manufacturing,

PDF

___

Topal E.S., BSD Tornalamada Kesme Kuvveti Esaslı İşleme Hatasının İncelenmesi ve Bilgisayar Desteğiyle Düzeltilmesi, Doktora Tezi, Erciyes Üniversitesi Fen Bilimleri Enstitüsü, Kayseri, 2003
Ramesh, R., Mannan M.A., Poo, A.N., Error Compensation in machine Tools- a review Part I: Geometric, cutting Force Induced and Fixture-Dependent Errors, Int. Journal of Machine Tools & Manufacfacture, 40, 1235-1256, 2000
Chun, F., Radial Error Feedback Geometric Adaptive Control for Bar Turning in CNC Turning Centers, PhD Thesis, The Florida State University, Florida, 2000
Liu, Z.Q., Venuvinod, P.K., Error Compensation in CNC Turning Solely from Dimensional Measurements Previously Machined Parts, CIRP Annals- Manufacturing Technology, 48, 429-432, 1999
Ramesh, R., Mannan M.A., Poo, A.N., Error Compensation in Machine Tools –– a Review: Part II: thermal errors, International Journal of Machine Tools and Manufacture, 40 (9), 1257-1284, 2000
Du, Z. C., Yang, J. G., Yao, Z. Q., Xue, B. Y., Modeling approach of regression orthogonal experiment design for the thermal error compensation of a CNC turning center, Journal of Materials Processing Technology, 129 (1-3), 619-623, 2002
Schmitz, T., Ziegert, J., Dynamic Evaluation of Spatial CNC Contouring Accuracy, Precision Engineering, Volume 24, (2), 99-118, 2000
Jywe, W., Liu, C., Verification and Evaluation Method For Volumetric and Positional Errors of CNC Machine Tools, International Journal of Machine Tools And Manufacture, Volume 40, Issue (13), 1899-1911, 2000
Ni, J., CNC Machine Accuracy Enhancement Through Real-time error Compansation, ASME Transactions Journal of Manufacturing Science and Engineering, 119, 717-724, 1997
Chungchoo, C., Saini, D.,On-Line Tool Wear Estimation in CNC Turning Operations Using Fuzzy Neural Network Model, International Journal of Machine Tools and Manufacture, Volume 42(1), 29-40, 2002
Lechniak, Z., Werner, A., Skalski, K., Kedzior, K., Methodology of Off-Line Software Compensation for Errors in The Machining Process on The CNC Machine Tool, Journal of Materials Processing Technology, 76, (1-3), 42-48, 1998
Schmitz, T., Ziegert, J., Examination of surface location error due to phasing of cutter vibrations, Precision Engineering, Volume 23, (2), 51-62, 1999
Yang, S., Yuan, J., Ni, J., Real-time Cutting Force Induced Error Compensation on a Turning Center, International Journal of Machine Tools & Manufacture, 37 (11), 1597–1610, 1997
Baron, L., Mayer, J. R. R., Cloutier, G., Phan, A.V., Finite Element and Experimental Studies of Diameter Errors in Cantilever Bar Turning, unpublished, Monreal, Canada, 2003
Ni, J., Wu, S. M., An On-line Measurement Technique for Machine Volumetric Error Compensation, ASME Transactions Journal of Engineering for Industry 115, 85-92, 1993
Mou, J., Liu, C. R., An Adaptive Metodology for Machine Tool Error Correction, ASME Transactions Journal of Engineering for Industry, 117 389-399, 1995
Veldhuis, S. G., Elbestawi, M. A., Modeling and Compensation for Five Axis Machine Tool Errors, ASME Manufacturing Science and Engineering, PED-Vol 68-2 827-839, 1994
Srinivasa, N., Ziegert, J.C., Prediction of Thermally Induced Time-Variant Machine Tool Error Maps Using a Fuzzy Artmap Neural Network, ASME Transactions Journal of Manufacturing Science and Engineering, 119, 626-630, 1997
Hatamura, Y., Nagao, T., Mitsuishi, M., Kato, K., Taguchi, S., Okumura, T., Nakagawa, G., Sugishita, H., Development ofan Intelligent Machining Centre Incorporating Active Compensation for Thermal Distortion, Annals of CIRP 42/1, 549-552, 1993
Segonds, S., Lagarrigue, P., Redonnet, J. M., Rubio, W., Compensation for Machining Defects Due to Spindle Dilatation, International Journal of Machine Tools & Manufacture, 41, 1439–1454, 2001
Szafarczyk, M., Misiewski, M., Automatic measurement and correction of workpiece diameter on NC centre lathe, Annals of CIRP 32/1, 305-308, 1983
Fan, K. C., Chao, Y. H., In-process Dimensional Control of the Workpiece During Turning, Precision Engineering, 13 (1) , 1991
Phan, A.V., Cloutier, G., Mayer, J. R. R., Finite-element model with closed-form solutions to workpiece deflections in turning, International Journal of Production Research, 37, (17), 4039-4051, 1999
Cloutier, G., Mayer, J. R. R., Phan, A.V., Singularity Function Representation in Obtaining Closed-Form Solutions to Workpiece Deflections in Turning Multi-Diameter Bars, Computer Modeling And Simulation in Engineering 4, 133-137, 1999
Phan, A.V., Cloutier, G., Mayer, J. R. R., A Finite-element model for Predicting Tapered Workpiece Deflections İn Turning, Computer Modeling And Simulation in Engineering 4 (2), 138-142, 1999
Mayer, J. R. R., Phan, A.V., Cloutier, G., Prediction of Diameter Errors in Bar Turning: a Computationally effective Model, Applied Mathematical Modeling, 24 943-956, 2000
Qiang, L. Z., Finite Difference Calculations of the Deformations of Multi-diameter Workpieces During Turning, Jurnal of Material Processing Technology, 98, 310-316, 2000
Palla, N., Khirishnaswami, P., Lei, S., Xin, X., An Amprical Study of Diametral Variations in Turning, Kansas State University, Manhattan, USA
Taylor, C.M., Yager, T. J., Caille, R. P., Walker, S. R., Open Modular Architecture Controls At GM Powertrain, GM Powertrain Group Manufacturing Engineering Controls Council, http://www.omac.org/Techdocs/ Open_at_GMPTG.pdf, 2003
Frampton, N., Tsao, J., Yen, J., Hard Real-time Extensions of Windows NT© Evaluation Report, http://www.omac.org/Techdocs/ntrtrpt2.pdf, 2003
Chrysler, Ford G. M., Requirements of Open, Modular Architecture Controllers for Applications in the Automotive Industry, Version 1.1, http://www.omac.org/Techdocs/omacv11.htm, 1994