OPTİK GÖZ SINIRLAYICILARLA ADIM MOTOR KONTROLÜ

Bu çalışmada manyetik malzemelerde herhangi bir sebeple oluşan mekanik çatlakların belirlenebilmesi için, üç boyutta hareket edebilen 3D tarayıcı sistem geliştirilmiştir. Adım motor kontrollü ve optik göz sınırlayıcılı sistemde optik göz sınırlayıcılar hareketli bir platforma yerleştrilmiş ve bu sayede hall sensörün istenen koordinatlara ulaşması sağlanmıştır. Bu makalede 3D tarayıcı sistemde optik göz sınırlayıcılarla adım motor kontrolünün nasıl yapıldığı ayrıntılı olarak tartışılmıştır.

Anahtar Kelimeler:

Tarayıcı sistem, Adım motor, Optik göz

CONTROL OF STEPPER MOTORS WITH OPTICAL SENSORS

In this study, 3D scanner system was constructed to inspection of the cracks on magnetic materials for industrial applications. 3D scanner system was operated by stepper motors in three dimensions. Optical device controlled stepper motors were delivered the hall sensor to the right position around the cracked region. Then surface leakage flux measurements were carried out at particular region to find out cracks in the sample. In this paper, electronic circuit of optical device controled 3D scanner system will be presented.

Keywords:

Scanner system, Stepper motor, Optical sensor,

PDF

___

Ekinci, Ş., Tahribatsız Test : Ultrasonik - Seviye I, Ç.N.A.E.M. Endüstriyel Uygulama Notları, İstanbul, 1990
Cartz, L., Nondestructive Testing : Radiography, Ultrasonic, Liquid Penetrant, Magnetic Particle,Eddy Current, ASM Intl, 1988, ISBN: 0871705176
Silk M. G., Ultrasonic Transducers for Nondestructive Testing, Adem Hilger Ltd., Bristol, 1984.
Hagemaier, D.J., Fundamentals of Eddy Current Testing, ASNT, 92, 1990, ISBN 0-931403-90-1
Bubenik, TA., Nesdroth, J.B., Eiber, RJ., Saffell, B.F., Magnetic flux leakage (MFL) technology for natural gas pipeline inspection., NDT & E International, Volume 31, Issue 5, 379, 1998.
Crouch, A.E., Beissner, R.E., Burkhardt, G.L , Creek, E.A., Grant, T.S., Magnetic flux leakage inspection of gas pipelines., NDT & E International, Volume 30, Issue 1, 31, 1997.
Katragadda, G., Lord, W., Sun, Y.S., Udpa, S., Udpa, L., Alternative magnetic flux leakage modalities for pipeline inspection, IEEE Transactions on Magnetics, Vol. 32, No. 3, 1581–1584, 1996,
Altschuler, E., Pignotti, A., Nonlinear model of flaw detection in steel pipes by magnetic flux leakage, NDT & E International, Vol. 28, Issue 1, 35-40, 1995.
Porter, P.C., Use of magnetic flux leakage (MFL) for the inspection of pipelines and storage tanks, NDT & E International, Vol. 30, Issue 1, 33, 1997.
Göktepe, M., Ege, Y., Bayri, N. and Atalay, S., Non-destructive crack detection using GMI sensor, Phys. Stat. Sol., No:12, 3436-3439, Almanya,2004.
Paulsen, J.A., Jiles, D.C., A magnetic imaging system for evaluation of material onditions using magnetoresistive devices, IEEE Transactions on magnetics, Vol. 39, No. 5, 2003.
Park, G.S., Park, E.S., İmprovement of the sensor system in magnetic flux leakage-type nondestructive testing, IEEE Transactions on magnetics, Vol.38, No. 2, 2002.
Gotoh, Y., and Takahashi, N., Study on problems in dedecting plural cracks by alternating flux leakage testing using 3-D nonlinear eddy current analysis, IEEE Transactions on magnetics, Vol. 39, No. 3, 2003 .
Chady, T., Ekokizono, M., Todaka, T., Tsuchida, Y. And Sikora, R., A family of matrix type sensor for dedection of slight flaws in conducting plates, IEEE Transactions on magnetics, Vol. 35, No. 5, 1999.
Oka, M. and Enokizono, M., A detection of backside crack using rotational magnetic flux sensor with search coils, IEEE Transactions on magnetics, Vol. 32, No. 5, 1996.
Oka, M. and Enokizono, M., Evaluation of a reverse-side defect on stainless steel plates by the residual magnetic field method, IEEE Transactions on magnetics, Vol. 36, No. 5, 2000.
Üstüner, A., İmalat Tekniğinden Kaynaklanan Hatalar, Ankara, 1981
Prokhorenko, P., Migoun, N., Introduction in Theory of Penetrant Testing, Minsk: Science & Technology, Russian, 1988.
Beattie, A.G., Acoustic Emission, Principles and instrumentation, Journal of Acoustic Emission, 1983.