Said NURDİN, Syafiqah A. KHAİRUDDİN, Hajar Athirah M. SUKRİ, Chuah C. WOOİ

6863

Characterization and optimization of palm industry ash waste (PIAW) derived zeolites using central composite cesign (CCD)

Characterization and optimization of palm industry ash waste (PIAW) derived zeolites using central composite cesign (CCD)

The prodigious ashes from power electricity generation plants were devastated as solid waste by palm industries into environment. PIAW, mostly Palm Oil Fuel Ash (POFA) comprising silica and alumina was discarded as non-profit oriented products, thus this work is about PIAW, essentially POFA derived zeolites using ultrasound irradiation. Performance of POFA was characterized, and process optimization was done by employing CCD. Pre-treated POFA as feedstock and formed zeolites were designated and analyzed using X-Ray Fluorescence (X-RF), Scanning Electron Microscopy (SEM) images, Fourier Transform Infrared (FTIR) spectrum and X-Ray Diffraction (XRD) diagram. Alkaline concentration (0.6 M-1.4M), irradiation time (140 min-160 min) and KOH/POFA (1.5:1-2.5:1) were examined as non-constant variables. Otherwise, ultrasonic power (600W), temperature (80°C) and silica alumina ratio were justified as constant and response variables. An optimal synthesized zeolites as ratio of SiO2 and Al2O3 (10.60) was found from surface plot based on quadratic typical at KOH=1 M, KOH/POFA=2 and time=150 min. Presence of A, P, X and irregular shape structures zeolites are commensurable to another resources, mainly fly ash. These findings are also important for waste reduction, recycling and zeolites synthesis from material under economic value.
Keywords:

Quadratic model Ultrasound irradiation, Alkaline, Solid waste, Silica,

PDF

___

  • [1]. A. Kongnoo, S. Tontisirin, P. Worathanakul, and C. Phalakornkule, “Surface characteristics and CO2 adsorption capacities of acid- activated zeolite 13X prepared from palm oil mill fly ash”, Fuel, 193, 385–394, 2017.
  • [2]. Z. Y. Lai and S. M. Goh, “Mechanical strength of binary oil palm kernel shell and HZSM-5 zeolite fuel pellets”, Fuel, 150, 378–385, 2015.
  • [3]. N. H. A. S. Lim, M. A. Ismail, H. S. Lee, M. W. Hussin, A. R. M. Sam, and M. Samadi, “The effects of high volume nano palm oil fuel ash on microstructure properties and hydration temperature of mortar”, Construction and Building Materials, 93, 29–34, 2015.
  • [4]. M. M. U. Islam, K. H. Mo, U. J. Alengaram, and M. Z. Jumaat, “Mechanical and fresh properties of sustainable oil palm shell lightweight concrete incorporating palm oil fuel ash”, Journal of Cleaner Production, 115, 307–314, 2015.
  • [5]. M. Safiuddin, M. Abdus Salam, and M. Z. Jumaat, “Utilization of Palm Oil Fuel Ash in Concrete: A Review”, Journal of Civil Engineering and Management, 17(2), 234–247, 2011.
  • [6]. M. E. Rahman, A. L. Boon, A. S. Muntohar, M. N. H. Tanim, and V. Pakrashi, “Performance of masonry blocks incorporating Palm Oil Fuel Ash”, Journal of Cleaner Production, 78, 195–201, 2014.
  • [7]. C. Acquah, L. S. Yon, Z. Tuah, N. L. Ngee, and M. K. Danquah, “Synthesis and performance analysis of oil palm ash (OPA) based adsorbent as a palm oil bleaching material”, Journal of Cleaner Production, 139, 1098–1104, 2016.
  • [8]. Z. X. Ooi, H. Ismail, and A. Abu Bakar, “Characterization of oil palm ash (OPA) and thermal properties of OPA-filled natural rubber compounds”, Journal of Elastomers and Plastics, 47(1), 13–27, 2015.
  • [9]. A. Á. B Maia, R. F. Neves, Rô. S. Angélica, and H. Pöllmann, “Synthesis, optimisation and characterisation of the zeolite NaA using kaolin waste from the Amazon Region: Production of zeolites KA, MgA and CaA”, Applied Clay Science, 108, 55–60, 2015.
  • [10]. L. Deng, Q. Xu, and H. Wu, “ Science Direct Synthesis of zeolite-like material by hydrothermal and fusion methods using municipal solid waste fly ash”, Procedia Environmental Sciences, 31, 662–667, 2016.
  • [11]. N. Al-Jammal, Z. Al-Hamamre, and M. Alnaief, “Manufacturing of zeolites based catalyst from zeolites tuft for biodiesel production from waste sunflower oil”, Renewable Energy, 93, 449–459, 2016.
  • [12]. G. Watanabe, Y. Nakasaka, T. Taniguchi, T. Yoshikawa, T. Tago and T. Masuda, “Kinetic studies on high-pressure methylation of 2-methylnaphthalene over MTW-type zeolites with different crystal sizes”, Chemical Engineering Journal, 312, 288–295, 2017.
  • [13]. J. C. Kim, M. Choi, H. J. Song, J. E. Park, J. H. Yoon, K. S. Park, and D. W. Kim, “Synthesis of uniform-sized zeolite from windshield waste”, Materials Chemistry and Physics, 166, 20–25, 2015.
  • [14]. P. Roy and N. Das, “Ultrasonic assisted synthesis of Bikitaite zeolites: A potential material for hydrogen storage application”, Ultrasonics Sonochemistry, 36, 466–473, 2017.
  • [15]. J. Behin, H. Kazemian, and S. Rohani, “Sonochemical synthesis of zeolite NaP from clinoptilolite”, Ultrasonics Sonochemistry, 28, 400–408, 2015.
  • [16]. N. E. Gordina, V. Y. Prokof’Ev, Y. N. Kul’Pina, N. V. Petuhova, S. I. Gazahova and O. E. Hmylova, “Effect of ultrasound on the synthesis of low-modulus zeolites from a metakaolin”, Ultrasonics Sonochemistry, 33, 210–219, 2016.
  • [17]. B. Sadukhan, N. K. Montal, and S. Chattoraj, “Optimization using central composite design and desirably function for sorption of methylene blue from aqueous solution onto Lemna major”, Karbala International Journal of Modern Science, 2(3), 145-155, 2016.
  • [18]. N. F. Ramandi, A. Ghassempous, N. M. Najafi, and E. Gashemi, “Optimization of ultrasonic assisted extraction of fatty acids from Borago officinalis L. flower by central composite design”, Arabian Journal of Chemistry, 10(1), S23-S57, 2017.
  • [19]. M. A. Salih, A. A. A. Ali, and N. Farzadnia, “Characterization of mechanical and microstructural properties of palm oil fuel ash geopolymer cement paste”, Construction and Building Materials, 65, 592–603, 2014.
  • [20]. A. S. A. Aziz, L. A. Manaf, H. C. Man, and N. S. Kumar, “Kinetic modeling and isotherm studies for copper (ii) adsorption onto Palm Oil Boiler Mill Fly Ash (POFA) as a natural low-cost adsorbents”, Bioresources, 9(1), 336–356, 2014.
  • [21]. N. M. Musyoka, L. F. Petrik, E. Hums, H. Baser, and W. Schwieger, “In situ ultrasonic diagnostic of zeolite X crystallization with novel (hierarchical)”, Ultrasonics, 54(2), 537–543, 2014.
  • [22]. M. P. Moisés, C. T. P., Da Silva, J. G. Meneguin, E. M. Girotto, and E. Radovanovic, “Synthesis of zeolite NaA from sugarcane bagasse ash”, Materials Letters, 108, 243–246, 2013.
  • [23]. M. Gougazeh and J. C. Buhl, “Synthesis and characterization of zeolite A by hydrothermal transformation of natural Jordanian kaolin”, Journal of the Association of Arab Universities for Basic and Applied Sciences, 15(1), 35–42, 2014.
  • [24]. C. Santasnachok, W. Kurniawan, and H. Hinode, “The use of synthesized zeolites from power plant rice husk ash obtained from Thailand as adsorbent for cadmium contamination removal from zinc mining’’, Journal of Environmental Chemical Engineering, 3(3), 2115–2126, 2015.
  • [25]. S. S. Bukhari, J. Behin, H. Kazemian, and S. Rohani, “Conversion of coal fly ash to zeolite utilizing microwave and ultrasound energies: A review”, Fuel, 140, 250–266, 2015.
  • [26]. S. N. Azizi and N. Asemi, “The effect of ultrasonic and microwave-assisted aging on the synthesis of zeolite P from Iranian perlite using box-behnken experimental design”, Chemical Engineering Communications, 201(7), 909–925, 2014.
  • [27]. S. Bohra, D. Kundu, and M. K. Naskar , “One-pot synthesis of NaA and NaP zeolite powders using agro-waste material and other low cost organic-free precursors”, Ceramics International, 40(1), 1229–1234, 2014.
  • [28]. T. V. Ojumu, P. W. Du Plessis, and L. F. Petrik , “Synthesis of zeolite A from coal fly ash using ultrasonic treatment - A replacement for fusion step”, Ultrasonics Sonochemistry, 31, 342–349, 2016.
  • [29]. T. Aldahri, J. Behin, H. Kazemian, and S. Rohani, “Synthesis of zeolite Na-P from coal fly ash by thermo-sonochemical treatment”, Fuel, 182, 494–501, 2016.
  • [30]. N. Sapawe, A. A. Jalil, S. Triwahyono, M. I. A. Shah, R. Jusoh, N. F. M. Salleh, B. H. Hameed, and A. H. Karim, “Cost-effective microwave rapid synthesis of zeolite NaA for removal of methylene blue”, Chemical Engineering Journal, 229, 388-398, 2013.
  • [31]. E. A. Mohamed, A. Q. Selim, M. K. Seliem, and M. R. Abukhadra, “Modeling and optimizations of phosphate removal from aqueous solutions using synthetic zeolite NaA”, Journal of Materials Science and Chemical Engineering, 3, 15-29, 2015.
Environmental Research and Technology-Cover
  • Yayın Aralığı: Yılda 4 Sayı
  • Başlangıç: 2018
  • Yayıncı: Yıldız Teknik Üniversitesi
Arşiv
Sayıdaki Diğer Makaleler

Characterization and optimization of palm industry ash waste (PIAW) derived zeolites using central composite cesign (CCD)

Said NURDİN, Syafiqah A. KHAİRUDDİN, Hajar Athirah M. SUKRİ, Chuah C. WOOİ