Metal iş kolunda bir işletme için iş değerleme sisteminin geliştirilmesi
Bu çalışmada, metal sanayinde mavi yakalı işlerin değerlendirilmesinde kullanılan MESS "Metal Sanayi İş Gruplandırma Sistemi"nin, faktörler, derece tanımları ve ağırlıkları (puanlan) yönüyle geliştirilmesi ve soba üretimi yapan bir işletmede, işlerin her iki sistem ile değerlendirilmesi amaçlanmıştır. MESS iş değerleme sistemi 1981 yılında hazırlanmış ve 1996 yılında güncellenmiştir. Bu sistemde eksik veya yetersiz görülen "öğrenim", "iş bilgisi", "işe konsantrasyon", "üretim akış sorumluluğu" ile ustabaşılık işlerini değerlendirmek amacıyla "idari sorumluluk" faktörleri tanımlanmış, teknoloji ve iş koşullarındaki değişimler dikkate alınarak diğer faktörlerin derece tanımları güncellenmiştir. İşletmedeki yöneticilere uygulanan anket ile faktörlerin ağırlıkları belirlenmiştir. Tanımlanmış 96 iş için anket ve görüşme iş analiz yöntemleri uygulanarak, MESS ve geliştirilmiş sistem için işler değerlendirilmiş ve önemli sonuçlar yorumlanmıştır.
The purpose of this study is to develop "Metal Industry Job Grading System - MUGS" used to evaluate blue-collar jobs in terms of factors, their weights and level definitions and also the evaluation of all the blue-collar jobs in a medium-sized stove manufacturer by using the MUGS and the revised system. It was prepared in 1981, and expanded in 1996. In this system, "Education", Knowledge", "Concentration", "Job Flow" and also "HRM Responsibility" which is required to assess the supervisors are added to MUGS. Taking into consideration with the developments in technology and working environmental conditions, the level definitions of the other factors are revised. The weights of all the factors are determined by using questionnaires answered by the managers in the company. 96 blue-collar jobs identified are evaluated according to both the MUGS and the revised system by applying the questionnaire and interview job analysis methods, and some essential results are discussed.
___
- 1. Adil G.K., Rajamani D., Strong D., (1996), Cell formation considering alternate routeings, International Journal of Production Research, 34(5), 1361-1380.
- 2. Altıparmak F., Dengiz B., (1998), Genetik Algoritmalar, Gazi Üniversitesi Fen Bilimleri Enstitüsü Dergisi, 11(3), 523-541.
- 3. Anagun A.S. ve Saraç T., (2006), Optimization of performance of genetic algorithm for 0-1 knapsack problems using Taguchi method, Lecture Notes of Computer Science, 3982, 678-687.
- 4. Askin R., Standridge C.R., (1993), Modeling and Analysis of Manufacturing Systems, John Wiley&Sons, U.S.A.
- 5. Chan, F.T.S., Lau, K.W. and Chan, P.L.Y., (2004), A holistic approach to manufacturing cell formation: incorporation of machine flexibility and machine aggregation, Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture, 218(10), 1279-1296.
- 6. Dengiz B., Altıparmak F., (1998), Genetik Algoritmalara Genel Bir Giriş, Endüstri Mühendisliği Dergisi, 9(3), 3-14.
- 7. Durmuşoğlu, M.B., Kulak, O. ve Balcı, H.H., (2003), Türkiye’de hücresel üretim uygulamalarının analizi ve değerlendirilmesi, Endüstri Mühendisliği Dergisi, 14(2), 2-20.
- 8. Goldberg, D.E., (1989), Genetic Algorithms in Search, Optimization, and Machine Learning, Addison-Wesley, USA.
- 9. Gonçalves, J.F. and Resende, M.G.C., (2004), An evolutionary algorithm for manufacturing cell formation, Computers & Industrial Engineering, 47, 247-273.
- 10. Grefenstette, J. (1986), Optimization of control parameters for genetic algorithims, IEEE Transactions on Systems, Man, and Cybernetics, 16, 122-128.
- 11. Holland, J., (1975), Adaptation in natural and artificial systems, University of Michigan Press, Ann Arbor.
- 12. Hwang, H. and Ree, P. (1996), Routes selection for the cell formation problem with alternative part process plans, Computers & Industrial Engineering, 30(3), 423-431.
- 13. İşlier A.A., (1995), İmalat Problemlerinde Genetik Algoritmalar, Otomasyon Dergisi, Ocak, 94-98.
- 14. İşlier A.A., (1996), Hücresel Üretim Sistemi Tasarımı İçin Sezgisel Bir Yaklaşım, Endüstri Mühendisliği Dergisi, 7, 3-13.
- 15. İşlier A.A., (1997), Tesis Planlaması, Osmangazi Üniversitesi, Endüstri Mühendisliği Bölümü, Eskişehir.
- 16. İşlier A.A., (2001), Üretim Hücrelerinin Bir Genetik Algoritma Kullanılarak Oluşturulması, Anadolu Üniversitesi Bilim ve Teknoloji Dergisi, 2(1), 137-157.
- 17. Joines, J.A., Culbreth, C.T. and King, R.E., (1996), Manufacturing cell design: an integer programming model employing genetic algorithms, IIE Transactions, 28(1), 69–85.
- 18. Kasilingam R.G. and Lashkari R.S. (1991), Cell formation in the presence of alternate process plans in flexible manufacturing system, Production Planning and Control, 2(2), 135-141.
- 19. King, J.R. and Nakornchai, V., (1982), Machine component group formation in group technology: review and extensions, International Journal of Production Research, 20(2), 117-133.
- 20. Kumar, K.R. and Chandrasekharan, M.P. (1990), Grouping efficacy: A quantitative criterion for goodness of block diagonal forms of binary matrices in group technology, European Journal of Operations Research, 24, 387-397.
- 21. Kusiak, A. (1987), The generalized group technology concept, International Journal of Production Research, 25, 561-569.
- 22. Lozano S., Guerrero F., Eguia I., Onieva L., (1999), Cell design and loading in the presence of alternative routing, International Journal of Production Research, 37(14), 3289-3304.
- 23. Moon Y.B. and Chi S.C. (1992), Generalized part-family formation using neural network techniques, Journal of Manufacturing Systems, 11, 149-160.
- 24. Nagi, R., Harhalakis, G. and Proth, J.M., (1990), Multiple routings and capacity considerations in group technology applications, International Journal of Production Research, 28(12), 2243–2257.
- 25. Sankaran S. and Kasilingam R. (1990), An integrated approach to cell formation and part routing in group technology manufacturing system, Engineering Optimization, 16, 235-245.
- 26. Sarker B.R. and Li K. (1997), Simultaneous route selection and cell formation: A mixed-integer programming time-cost model, İntegrated Manufacturing Systems, 8, 374-377.
- 27. Sofianopoulou S., (1999), Manufacturing cells design with alternative process plans and/or replicate machines, International Journal of Production Research, 37(3), 707-720.
- 28. Won, Y. and Kim, S. (1997), Multiple criteria clustering algorithm for solving the group technology problem with multiple process routings, Computers & Industrial Engineering, 32(1), 207-220.
- 29. Zhao C., Zhiming W., (2000), A genetic algorithm for manufacturing cell formation with multiple routes and multiple objectives., International Journal of Production Research, 38(2), 385-395.
- ISSN: 1300-3410
- Yayın Aralığı: Yılda 3 Sayı
- Başlangıç: 1989
- Yayıncı: TMMOB MAKİNA MÜHENDİSLERİ ODASI