Metin Aydın, Oğuzhan OCAK, Günsu ÇIRBANLI ALBAŞ

Kalıcı Mıknatıslı Senkron Motorların Dogrudan Sürüslü Beyaz Esya Uygulamalarında Kullanımı

Bu çalısmada dogrudan sürüs (DS) beyaz esya uygulaması için kalıcı veya sürekli mıknatıslı bir motor tasarımı gerçeklestirilmistir. Farklı oluk sayısı-kutup sayısı seçenekleri incelenmis, uygun kombinasyon belirlenmis, verilen tasarım kriterleri dogrultusunda motor elektromanyetik, termal ve yapısal analizleri gerçeklestirilerek motor tasarımı sonlandırılmıs ve motor prototip asamasına getirilmistir.

Anahtar Kelimeler:

Dogrudan Sürüs, Kalıcı Mıknatıslı Motor, PM Motor, Sonlu Elemanlar Analizi

Permanent Magnet Synchronous Motors Used in Direct-Drive Home Appliance Applications

This paper talks about a permanent magnet motor design for direct-drive home appliance applications. Within the study, various slot and pole number combinations are investigated and appropriate combination is found. Motor electromagnetic design, thermal and structural analyses are all completed for given design specifications and the motor prototype work is started.

Keywords:

Direct-Drive, Permanent Magnet Motor, PM Motor, Finite Element,

PDF

___

T. Sebastain and G. R. Slemon, “Operation limits of an inverter-driven permanent magnet motor drives”, IEEE Trans. on Industry App, Vol.23, No.2, 1987, pp.327-333.
T. Sebastian, G. R. Slemon and M. A. Rahman, “Design considerations for variable speed permanent magnet motors”, Proceedings of International Conference on Electrical Machines (ICEM) 1986, pp.1099-1102.
N. Boules, “Prediction of no-load flux density distribution of permanent magnet machines”, IEEE Tran. on Industry App., Vol.21, No.3, 1987, pp.633-643.
A. El-Refaie, “High Speed Operation of Permanent Magnet Machines”, PhD Thesis, Unv. of Wisconsin, 2005.
S. Huang, M. Aydin and T. A. Lipo, “A direct approach to electrical machine performance evaluation: Torque density assessment and sizing optimization”, 15th Int. Conference on Electrical Machine ICEM 2002, Belgium.
S. Huang, J. Luo, F. Leonardi, and T. A. Lipo, “A General Approach to Sizing and Power Density Equations for Comparison of Electrical Machines,” IEEE Transactions on Industry Applications, IEEE Trans. IA- 34, No.1, pp.92-97, 1998.
SPEED Software, PC-BDC 9.04 User's Manual, February 2010.
Flux 2D Application Manual, Cedrat, March 2010.
D. A. Staton, “Thermal computer aided design – Advancing the revolution in compact motors,” in Proc. IEEE IEMDC, Boston, MA, Jun. 2001, pp. 858–863.
Motor-CAD v3.1 software manual, April 2006.