IMPLEMENTATION OF DYNAMIC ANALYSIS OF SRM WITH MODIFIED POLE GEOMETRY

ISSN: 2619-9831
Başlangıç: 2001
Yayıncı: İstanbul Üniversitesi-Cerrahpaşa

One solution to the high torque ripple problem of the switched reluctance motor is to modify its pole geometry. To show how much this solution is effective, static field analyses are usually contended with. However, dynamic analyses of SRM are to be made to get a real model of SRM. In this study, dynamic analysis of conventional SRM and the modified SRM are made and their performance parameters are compared with each other. The comparison shows an improvement of 23.6 % in torque ripple and 18 % in efficiency which is in agreement with the results of static analysis

Keywords:

Torque Ripple, Switched Reluctance Motor Pole Geometry,

PDF

___

Moallem, M., Ong, C.M., and Unnewehr, L.E.: Effect of Rotor Profiles on the Torque of a Switched Reluctance Motor, IEEE Trans. on Ind. App., Vol. 28, No. 2, 1992, pp 364-369.
Ohdachi, Y., Kawase, Y., Miura, Y., Hayashi, Y.,. Optimum Design of Switched Reluctance Motors using Finite Element Analysis, IEEE Trans. on Magnetics., Vol. 33, No. 2, 1997 pp 2033-2036.
Rochford, C., Kavanagh, R.C., Egan, M.G., and Murphy, J.M.D., Development of Smooth Torque in Switched Reluctance Motors Using Self-Learning Techniques, European Power Electronics, pp 14-19, 1993.
Derdiyok A., Inanc N., Ozbulur, V., Ozoglu Y., Optimal Phase Current Profiling of SRM by Fuzzy Logic Controller to Minimize Torque Ripple, 12th IEEE-ISIC 97 Conf., Istanbul, TURKEY, pp.77-82, 1997.
Yusuf Ozoglu, Muhammed Garip, Erkan Mese, Torque Reluctance Motors by Pole Tip Shapings, 10th International Power Electronics and Motion Control, EPE-PEMC 2002, Cavtat & Dubrovnic, Croatia, September, 9-11 2002. in Switched
Miller, T. J. E., 1993. Switched Reluctance Motors and Their Control. Oxford University Press, Oxford. BIOGRAPHY
Yusuf Ozoglu was born in Urgup, Turkey in 1967. He