___

• M. Higashimura, Current-mode all pass filter using FTFN with grounded capacitor, Electron Lett 27 (1991), pp. 1182–1183.
• M. Higashimura, Realization of current-mode transfer function using four terminal floating nullor, Electron Lett 27 (1991), pp. 170–171.
• B. Chipipop and W. Surakampontorn, Realization of current-mode FTFN-based inverse filter, Electron Lett (1999), pp. 690–691.
• U. Cam and H. Kuntman, A new CMOS realization of a four terminal floating nullor (FTFN), Int J Electron (2000), pp. 809–817.
• O. Cicekoglu, Current-mode biquad with a minimum number of passive elements, IEEE Trans Circuits System II Analog Digital Signal Process 48 (2001), pp. 221–
• F.A. Arie, Comments on current-mode biquad with a minimum number of passive elements, IEEE Trans Circuits System II Analog Digital Signal Process 49 (2002), p. 783.
• N.A. Shah and M.A. Malik, A novel FTFN based universal cascadable current-mode biquad filter, Frequenz 57 (2003), pp. 166–167.
• M.T. Abulma’atti and H.A. Al-Zaher, Universal two- input two-output current-mode active biquad using FTFNs, Int J Electron 86 (1999), pp. 181–188.
• S.I. Liu, Cascadable current-mode filters using single FTFN, Electron Lett 31 (1995), pp. 1965–1966.
• M.T. Abulma’atti, Cascadable current-mode filters using single FTFN, Electron Lett 32 (1996), pp. 1457–
• S.I. Liu and C.-S.I.I. Hwang, Realization of current- mode filters using single FTFN, Int J Electron 82 (1997), pp. 499–502.
• U. Cam, O. Cicekoglu and H. Kuntman, Current- mode single-input three output SITO universal filter employing FTFNs and reduced number of passive components, Frequenz 54 (2000), pp. 94–96.
• O. Cicekoglu and H. Kuntman, A new four terminal floating nullor based single-input three-output current- mode multifunction filter, Microelectron J 30 (1999), pp. –118.
• S.I. Liu and C.Y. Yang, High-input impedance filters using FTFNs, Int J Electron 84 (1998), pp. 595–
• S.I. Liu and J.L. Lee, Insensitive current/voltage- mode filters using FTFNs, Electron Lett 32 (1996), pp. –1080. ,
• U. Cam, O. Cicekoglu, M. Gulsoy and H. Kuntman, New voltage and current mode first order allpass filters using single FTFN, Frequenz 54 (2000), pp. 177–179.
• O. Cicekoglu, S. Ozcan and H. Kuntman, Insensitive multifunction filter implemented with current conveyors and only grounded passive elements, Frequenz 53 (1999), pp. 158–160.
• M. Higashimura and Y. Fukui, Realization of all- pass and notch filters using a single current conveyor, Int J Electron 65 (1988), pp. 823–828.
• A. Fabre, F. Dayoub, L. Duruisseau and M. Kamou, High-input impedance insensitive second-order using filters implemented from current conveyors, IEEE Trans CAS-I, Fund Theories Appl 41 (1994), pp. 918–921.
• J.W. Horng, Inverting and/or non-inverting biquad circuit using second-generation current conveyors, Int J Electron 86 (1999), pp. 297–303.
• A.M. Soliman, New inverting-non-inverting bandpass and lowpass biquad circuit using current conveyors, Int J Electron 81 (1996), pp. 577–583.
• J.W. Horng, Voltage-mode universal biquadratic filter with one input and five outputs using OTAs, Int J Electron 89 (2002), pp. 729–737.
• C.T. Lee and H.Y. Wang, Minimum realization for FTFN-based SRCO, Electron Lett 37 (2001), pp. 1207–
• Norwood MA. Analog devices, 1990