FAST SPEED RESPONSE FIELD-ORIENTATION CONTROL OF INDUCTION MOTOR DRIVE WITH ADAPTIVE NEURAL INTEGRATOR

Keywords:

Field-orientation control, neural integrator and induction motor,

PDF

___

F.Blaschke, ‘The Principle of Field Orientation as Applied to the New Trans vector Closed Loop Control System for Rotating Field Machines’’, Siemens Review, vol. 34, pp. 217-220, 1972.
K. Hasse, ‘Zum dynamischen Verahalten der Asynchronmaschine bei Betrrieb mit variabler Staenderfrequenz und Staenderspannung” (“On the Dynamic Behavior of Induction Machines driven by Variable Frequency and Voltage Source”), ETZ-A, Bd 89 H.4, pp. 77-81, 1968.
A Nabae, K. Otsuka, H. Uchino, & R. Kurosawa, “An Approach to flux Control of Induction Motor Operated with Variable Frequency Power Supply”, IEEE Trans, Ind. Appl. vol. IA-16,pp.342-350, 1980.
Bashudeb Chandra Ghosh “Parameter Adaptive Vector Controller for CSI-fed Induction Motor Drive and Generalized Approaches for Simulation of CSI-IM System” P.hd. Thesis Department of Electrical Engineering, IIT, Kharagpur, July, 1992.
R. S. Cabera and J. Morales, “Some results about the Control and Observation of Induction Motors,” in Proc. IEEE American Control Conf. vol. 3, pp. 1633-1637, 1995.
Jun Hu and Bin Wu, “ New Integration Algorithms for Estimating Motor Flux over a Wide Speed Range.” IEEE Trans. On Power Electron., vol. 13, No. 5, pp. 969- 977, September 1998.
Maurizio Cirrincione, Marcello Pucci, Giamsalvo Cirrincione, and Gerard-Andre Capolino “ A new adaptive Integration Methodology for Estimating Flux in Induction Machine Drives.” IEEE Trans. Om Power Electronic. Vol. 19, no. 1, pp 25- 33, January 2004.
Habib-ur Rehman, “ Elimination of the Stator Resistance Sensitivity and Voltage Sensor Requirement Problems for DFO Control of an Induction Machine.” IEEE Trans. on Industrial Electron., vol. 52, no. 1,pp.263- 269, February 2005.
Young Ahn Kwon, and Sung Hwan Kim, “ A New Scheme for Speed-Sensorless Control of Induction Motor.” IEEE Trans. on Industrial Electron., vol. 51, no. 3, pp.545-550, June 2004.
Haithem Abu-Rub, Jaroslaw Guzinski, Zbigniew Krzeminski, and Hamid A. Toliyat, “ Advanced Control of Induction Motor Based on Load Angle Estimation.” IEEE Trans. on Industrial Electron., vol. 51, no. 1, pp.5-13, February, 2004.
Cristian Lascu and Andrzej M. Trzynadlowski, “ Combining the Principle of Sliding Mode, Direct Torque Control, and Space-Vector Modulation in a High- Performance Sensorless AC Drive.” IEEE Trans. on Industry Applications, vol. 40,No. 1, pp. 170-177, January 2004.