___

• [1] Yang, S., Zhang, J., Lian, J., Lei, Y., Welding of aluminum alloy to zinc coated steel by cold metal transfer, Material and Design, 49 (2013) 602-612. [2] Moreira, P.M.G.P., Jesus, A.M.P., Ribeiro, A.S., Castro, P.M.S.T., Fatigue crack growth in friction stir welds of 6082-T6 and 6061-T6 aluminium alloys: A comparison, Theoretical and Applied Fracture Mechanic, 50 (2008) 81-91. [3] Feng, J., Zhang, H., He, P., The CMT short-circuiting metal transfer process and its use in thin aluminium sheets welding, Materials and Design, 30 (2009) 1850-1852. [4] Ahmad, R., Bakar, M.A., Effect of a post-weld heat treatment on the mechanical and microstructure properties of AA6061 joints welded by the gas metal arc welding cold metal transfer method, Materials and Design, 32 (2011) 5120-5126. [5] Shang, J., Wang, K., Zhou, Q., Zhang, D., Huang, J., Li, G., Microstructure characteristics and mechanical properties of cold metal transfer welding, Mg/Al dissimilar metals, Materials and Design, 34 (2012) 559-565. [6] Cao, R., Wen, B.F., Chen, J.H., Wang, P.C., Cold metal transfer joining of magnesium AZ31B-to-aluminum A6061-T6, Materials Science and Engineering A, 560 (2013) 256-266. [7] Rykala, J., Pfeifer, T., Robotised CMT welding of 6xxx series aluminium alloys, Biuletyn Instytutu Spawalnictwa, No. 6, (2013). [8] Gungor, B., Kaluc, E., Taban, E., Şık, A., Mechanical and microstructural properties of robotic cold metal transfer (CMT) welded 5083-H111 and 6082-T651 aluminum alloys, Materials and Design, 54 (2014) 207-211. [9] Kumar, R., Dilthey, U., Dwivedi, D.K., Ghosh, P.K., Thin sheet welding of Al 6082 alloy by AC pulse-GMA and AC wave pulse-GMA welding, Materials and Design, 30 (2009) 306-313. [10] Lorenzin, G., Rutili, G., The innovative use of low heat input in welding: experiences on ‘cladding’ and brazing using the CMT proces, Welding International, 23:8, (2009) 622-632. [11] Zhang, H.T., Feng, J.C., He, P., Zhang, B.B., Chen, J.M., Wang, L., The arc characteristics and metal transfer behaviour of cold metal transfer and its use in joining aluminium to zinc-coated steel, Materials Science and Engineering A, 499 (2009) 111-113. [12] Meco, S., Pardal, G., Eder, A., Quintino, L., Software development for prediction of the weld bead in CMT and pulsed-MAG processes, Int J Adv Manuf Technol, 64 (2013) 171-178. [13] Zhang, H.T., Feng, J.C., He, P., Hackl, H., Interfacial microstructure and mechanical properties of aluminium-zinc-coated steel joints made by a modified metal inert gas welding-brazing process, Materials Characterization, 58 (2007) 588-592. [14] Cao, R., Huand, Q., Chen, J.H., Wang, P.C., Cold metal transfer spor plug welding of AA6061-T6-to-galvanized steel for automotive applications, Journal of Alloys and Compounds, 585 (2014) 622-632. [15] Pickin, C.G., Williams, S.W., Lunt, M., Characrterisation of the cold metal transfer (CMT) process and its application for low dilution cladding, Journal of Materials Processing Technology, 211 (2011) 496-502. [16] Ehab, A., Danaf, E., El-Rayes, M.M., Microstructure and mechanical properties of friction stir welded 6082 AA in as welded and post weld heat treated conditions, Materials and Design, 46 (2013) 561-572. [17] Scialpi, A., De Filippis, L.A.C., Cavaliere, P., Influence of shoulder geometry on microstructure and mechanical properties of friction stir welded 6082 aluminium alloy, Materials and Design, 28 (2007) 1124-1129.