Sirer ALBAYRAK, Mustafa ÖZDEMİR, Melike YAĞCI

Risk Analysis in Drill Benches in terms of Occupational Health and Safety

The aim of this study is to examine drill benches, which are frequently used in the machinery manufacturing industry, in terms of occupational health and safety.Using the "Fine-Kinney Risk Analysis" method, the drill bench used in a medium-sized machinery manufacturing factory in Konya was examined. The visuals taken from the drill benches and the data obtained by live observation were graded in the risk assessment tables.When the data obtained are analyzed; 2 of them are in the "Very High Risk" category, where the work should be interrupted and measures should be taken immediately, 4 in the "High Risk" category which should be eliminated by taking them into the short-term action plan. 2 of them are in the "Significant Risk" category, which should be carefully monitored and eliminated by taking them into the annual action plan, 1 of them are "Absolute Risk" category. Total of 9 risks were identified.With the risk analysis, it was concluded that drill benches contain some risks in terms of occupational health and safety.

Keywords:

Occupational health and safety risk, Fine-Kinney, drilling machines,

PDF

___

ANONYMOUS, (2012). Occupational Health and Safety Law No. 6331, www.mevzuat.gov.tr, (Date of access: 16.05.2021).
ANONYMOUS, (2012). T.C. Ministry of National Education Renewable Energy Technologies Drilling and Countersinking in Energy Mechanics, http://www.megep.meb.gov.tr, (Date of access: 16.05.2021).
ANONYMOUS, (2017). Ministry of National Education Professional Development, Occupational Health and Safety, http://megep.meb.gov.tr, (Date of access: 16.05.2021).
ANONYMOUS, (2018). Chamber of Mechanical Engineers Report, Occupational Health and Safety, https://www.mmo.org.tr, (Date of access: 16.05.2021).
AKER. A. (2019). isk Assessment with 5x5 Matrix and Fine-Kinney Method in Occupational Health and Safety and its Application in Metal Sector Sakarya University Institute of Science and Technology, Master Thesis (Printed).
AKPINAR, T. ÇAKMAKKAYA, B.Y. (2014). Risk Assessment Obligation of Employers in Terms of Occupational Health and Safety, Journal of Work and Society, 40 (1):273-304.
ALBAYRAK, S. YEŞILDAL, F. YILDIRIM, C. (2020). SAE 4140 Effects of Cutting Parameters on Noise Level and Surface Roughness in Steel Turning: Optimization of Parameters, Journal of Iğdır University Graduate School of Natural and Applied Sciences, 10(4): 2759-2769.
ÇAPARLAR, C.Ö. DÖNMEZ, A. (2016). What is Scientific Research, How to Do it, Turk JAnaesthesiolReanim, 44(4), 212-218.
EKER, A,. ÖZÇELIK ,T.Ö. (2020). Risk Assessment with 5x5 Matrix and Fine-Kinney Method in Metal Industry, Karaelmas Journal of Occupational Health and Safety, 4(1):65-75.
ERZURUMLUOĞLU, K. KÖKSAL, K.N. GEREK, İ.H. (2016). Performing Risk Analysis Using the Fine-Kinney Method in the Construction Sector, 5th Occupational Health and Safety Symposium, 2015, 137-146.
FINE, W.T. (1971). Mathematical Evaluation for Controlling Hazards, Journal of Safety Research, Dec,Vol.3, No. 41971.
KINNEY, G.F. WIRUTH, A.D. (1976). Practical Risk Analysis for Safety Management, Technical Publication 5865, Naval Weapons Center
ÖZDEMIR, M. (2021). Indoor Sports Hall Risk Analysis in terms of Occupational Health and Safety (Bayburt Example), Anatolia Sport Research, 2(1), 30-45.