Kristal Yöneliminin ve Sıcaklığın Cu Nano Telinin Mekanik Özelliklerine Etkisinin Moleküler Dinamik Benzetimi ile İncelenmesi

Bu çalışmada , ve yüksek simetrili kristalografik yönelimleri boyunca Cu nano teline uygulanan tek eksenli gerilme deformasyonunun mekanik özelliklere etkisi Moleküler Dinamik (MD) benzetim yöntemi ile incelendi. Atomlar üzerine etki eden kuvvetler çok cisim etkileşmelerini içeren Gömülmüş Atom Metodu (GAM) potansiyel fonksiyonunun türevinden elde edildi. Farklı kristal yönelimlerine sahip Cu model nano tellerin farklı sıcaklıklar altında zor-zorlanma eğrileri, elastiklik modülü (E), akma zoru değerleri belirlendi. Elde edilen atomik görüntüler ve genel komşu analiz metodu (Common Neighbor Analysis-CNA) kullanılarak uygulanan gerilme sonucu nano tellerde meydana gelen plastik deformasyonun bütün yönelimler için Shockley kısmi dislokasyonların aktif hale geçmesi ve yığılım kusurları sonucu meydana geldiği tespit edildi. Ayrıca ve yönelimleri için akma meydana geldiğinde ikiz yapılarının oluşumu belirlendi. Kristal yönelimlerinin nano telin mekanik özellikleri üzerinde önemli bir etkiye sahip olduğu görüldü.

Anahtar Kelimeler:

Kristal yönelimi, nano tel, mekanik özellikler, moleküler dinamik.

Investigation of the Effect of Crystal Orientation and Temperature on Mechanical Properties of Cu Nanowire by Molecular Dynamics Simulation

In this study, the effect of uniaxial tensile strain applied to Cu nanowire along the , and highly symmetric crystallographic orientations on the mechanical properties was investigated by Molecular Dynamics (MD) simulation method. The forces acting on atoms were obtained from the derivative of the Embedded Atom Method (EAM) potential function, which includes many-body interactions. The Stress-strain curves, Young's modulus (E), yielding strength, and values of Cu model nanowires with different crystal orientations were determined under different temperatures. By using the obtained atomic images and the Common Neighbor Analysis method (CNA), it was determined that the plastic deformation occurred in the nanowires as a result of the stress applied as a result of the activation of Shockley partial dislocations and stacking faults defects for all orientations. In addition, for the and orientations, the formation of twin structures was determined when yielding occurred. It was seen that the crystal orientations have a significant effect on the mechanical properties of the nanowire.

Keywords:

Crystal orientation, nanowire, mechanical properties, molecular dynamic,

PDF

___

Diao, J., Gall, K., Dunn, M.L. 2004. Yield strength asymmetry in metal nanowires, Nano Lett, 4, pp. 1863-1867. doi.org/10.1021/nl0489992
Tosatti, E., Prestipino, S., Kostlmeier, S., Dal Corso, A., Di Tolla, F.D. 2001. String tension and stability of magic tip-suspended nanowires, Science, 291, pp. 288-290. doi: 10.1126/science.291.5502.288
Kondo, Y., Takayanagi, K. 1997. Gold nanobridge stabilized by surface structure, Phys. Rev. Lett. 79 (18),3455-3458. doi.org/10.1103/PhysRevLett.79.3455
Pasquier, A., Unalan, H. E., Kanwal, A., Miller, S., Chhowalla, M. 2005. Conducting and transparent single-wall carbon nanotube electrodes for polymer-fullerene solar cells, Appl. Phys. Lett., 87, 203511. doi.org/10.1063/1.2132065
Lee, K., Wu, Z., Chen, Z., Ren, F., Pearton, S. J., Rinzler, A. G. 2004. Single wall carbon nanotubes for p-type ohmic contacts to GaN light-emitting diode, Nano Lett., 4, 911-914. doi.org/10.1021/nl0496522
Li, J., Hu, L., Wang, L., Zhou, Y., Gruner, G., Marks, T. J. 2006. Organic light-emitting diodes having carbon nanotube anodes, Nano Lett., 6, 2472-2477. doi.org/10.1021/nl061616a
Sainath, G., Choudhary, B.K. 2016. Orientation dependent deformation behaviour of bcc iron nanowires, Computational Materials Science, 111, pp. 406-415. doi.org/10.1016/j.commatsci.2015.09.055
Wen, Y.H., Zhang, Y., Wang, Q., Zheng J.C., Zhu, Z.Z. 2010. Orientation-dependent mechanical properties of Au nanowires, Computational Materials Science, 48, pp. 513-519. doi.org/10.1016/j.commatsci.2010.02.015
Kizuka, T. 1998. Atomistic visualization of deformation in gold, Phys. Rev. B, 57 (18), pp. 11158-11163. doi.org/10.1103/PhysRevB.57.11158
Tschopp, M.A., McDowell, D.L. 2007. Tension-compression asymmetry in homogeneous dislocation nucleation in single crystal copper, Appl. Phys. Lett., 90, 121916. doi.org/10.1063/1.2715137
Tschopp, M.A., McDowell, D.L. 2008. Influence of single crystal orientation on homogeneous dislocation nucleation under uniaxial loading, J. Mech. Phys. Solids, 56, pp. 1806-1830. doi.org/10.1016/j.jmps.2007.11.012
Jing, Y., Meng, Q., Zhao, W. 2009. Molcular Dynamics simulations of the tensile and melting behaviours of silicon nanowires, Physica E, 41, pp. 685-689. doi.org/10.1016/j.physe.2008.11.006
Katakam, K. C., Yedla, N. 2021. Influence of orientation and temperature on the mechanical properties and deformation behavior of nickel nanowire under bending: A large scale molecular dynamics simulation, Materials Today: Proceedings, 39, pp. 1727-1732. doi.org/10.1016/j.matpr.2020.06.302
Jelinek, P., Perez, R., Ortega, J., Flores, F. 2003. First-principles simulations of the stretching and final breaking of Al nanowires: Mechanical properties and electrical conductance, Phys.Rev. B., 68, 085403. doi.org/10.1103/PhysRevB.68.085403
Cai, J., Ye, Y.Y. 1996. Simple analytical embedded-atom-potential model including a long-range force for fcc metals and their alloys, Phys. Rev. B, 54, 8398. doi.org/10.1103/PhysRevB.54.8398
Tolpin, K.A., Bachurin, V.I., Yurasova, V.E. 2012. Features of energy dependence of NiPd sputtering for various ion irradiation angles, Nucl. Instrum. Methods Phys. Res. B, 273, pp. 76-79. doi.org/10.1016/j.nimb.2011.07.043
Hong, Z.H., Fang, T.H.,Hwang,S.F. 2011. Phase transformation of stress-induced zinc oxide nanobelts using molecular dynamics, Computational Materials Science, 50, pp. 1994-1950. doi.org/10.1016/j.commatsci.2011.01.049
Gao, Y., Wang, H., Zhao, J., Sun, C., Wang, F. 2011. Anisotropic and temperature effects on mechanical properties of copper nanowires under tensile loading, Computational Materials Science, 50, pp. 3032-3037. 10.1016/j.commatsci.2011.05.023
Zhang, L., Lu, C., Tieu, A.K. 2018. Nonlinear elastic response of singel crystal Cu under uniaxial loading by molecular dynamics study, Materials Letters, 227, pp. 236-239. doi.org/10.1016/j.matlet.2018.05.094
Sarangi, S.S. 2021. Study on Young’s modulus of metallic nanowires using classical molecular dynamics simulations, Materials Today: Proceeding s, 41, pp. 413-415. doi.org/10.1016/j.matpr.2020.09.800
Xu, W., Kim, W.K. 2019. Molecular dynamics simulation of the uniaxial tensile test of silicon nanowires using the MEAM potential, Mechanics of Materials, 137, 103140. doi.org/10.1016/j.mechmat.2019.103140
Alian, A.R., Ju, Y., Muguid, S.A. 2019. Comprehensive atomistic modeling of copper nanowires-based surface connectors, Materials and Design, 175, 107812. doi.org/10.1016/j.matdes.2019.107812
http://lammps.sandia.gov/.LAMMPS Molecular Dynamics Simulator (Erişim Tarihi:02.04.2021).
Kazanc, S. 2013. The effects on the lattice dynamical properties of the temperature and pressure in random NiPd alloy, Can. J. Phys., 91 (10), pp.833-838. doi:10.1139/cjp-2013-0090
Kazanc, S., Ozgen, S., Adiguzel, O. 2003. Pressure effects on martensitic transformation under quenching process in a molecular dynamics model of NiAl alloy, Physica B, 334(3-4), pp. 375-381. doi:10.1016/S0921-4526(03)00101-7
Foiles, S.M., Baskes, M.I., Daw, M.S. 1986, Embedded-atom-method functions for the fcc metals Cu, Ag, Au, Ni, Pd, Pt, and their alloys, Phys. Rev. B, 33, 7983. doi.org/10.1103/PhysRevB.33.7983
Malins, A., Williams, S.R., Eggers, J., Royall, C.P. 2013. Identification of structure in condensed matter with the topological cluster classification, The Jouurnal of Chemical Physics, 139, 234506. doi.org/10.1063/1.4832897
Stukowski, A. 2012. Structure identification methods for atomistic simulations of crystalline materials, Modelling and Simulation in Materials Science and Engineering, 20, 045021. doi.org/10.1088/0965-0393/20/4/045021
Stukowski, A. 2010. Visualization and analysis of atomistic simulation data with OVITO–the Open Visualization Tool, Modelling and Simulation in Materials Science and Engineering, 18(1), 015012. doi:10.1088/0965-0393/18/1/015012
Wu, H.A. 2006, Molecular dynamics study of the mechanism of metal nanowires at finite temperature, European Journal of Mechanics A/Solids, 25, pp. 370-377. doi.org/10.1016/j.euromechsol.2005.11.008
Sanders, P.G., Eastman, J.A., Weertman J.R. 1997, Elastic and Tensile Behavior of Nanocrystalline Copper and Palladium, Acta Mater., 45(10), pp. 4019-4025. doi:10.1016/S1359-6454(97)00092-X
Wen, Y. H., Zhu, Z. Z., Zhu, R. Z. 2008. Molecular dynamics study of the mechanical behavior of nickel nanowire: Strain rate effects, Computational Materials Science, 41, 553-560. doi.org/10.1016/j.commatsci.2007.05.012
Fang, R., Wang, W., Guo, L., Zhang, K., Zhang, X., Li, H. 2020. Atomic insight into the solidification of Cu melt confined in graphene Nanoslits. Journal of Crystal Growth, 532, 125382. doi.org/10.1016/j.jcrysgro.2019.125382