ÇOK SİLİNDİRLİ BİR MOTORDA EMME VE EGZOZ SİSTEMİ GEOMETRİSİNİN PERFORMANS KARAKTERİSTİKLERİNE ETKİSİ

The performance characteristics of a multicylinder engine can be improved by optimisation of gas exchange process. The aim of optimisation of gas exchange process is determination at the same time of valve timing and geometry of inlet and exhaust systems with inserting turbocharging system if exists. The gas exchange process of a natural gas engine’s series has been optimised within a research project work. The whole engine including inlet and exhaust systems modelled in a engine cycle simulation code where finite difference method is used. Initially, numerical method and engine model used in this work have been verified by experiments. Then, the effects of engine parameters have been investigated for engine performance. In this paper, an V20 cylinder engine has been taken into account for investigation of inlet and exhaust systems on engine performance. Finally, it is shown that the geometry of exhaust system has an important effect on engine performance

Anahtar Kelimeler:

Motor, Egzoz Sistemi, Dolgu Değişim prosesi

THE EFFECT OF GEOMETRIES OF INLET AND EXHAUST SYSTEMS ON THE PERFORMANCE CHARACTERISTICS OF A MULTICYLINDER ENGINE

___

AVL-LİST (1995): “User Manuel for AVL BOOST”, AVL List GmbH, Department for Applied Thermodynamics
BULATY, T.; WİDENHORN, M.; CORBERAN, J.M. (1993): Berechnung der instationären Strömung in verzweigten Auspuffsystemen, “Motortechnische Zeitschrift”, Nr.4/1993
HANNİBAL, W.; LUKAS, F. (1995): Rechnergestützte Auslegung des Audi-Fünfventil- Zylinderkonzeptes, “Motortechnische Zeitschrift”, Sonderdruck 1995, s. 22-29
HEYWOOD, J.B. (1988): Internal Combustion Engine Fundamentals, McGraw-Hill, New York
KESGİN, U. (1996): Rechnerische Methoden zur Ladungswechseloptimierung am Beispiel von Grossgasmotoren, Dissertation der TU Graz
PİSCHİNGER, R.; KRASSNİG, G.; TAUCAR, G.; SAMS, T. (1989): “Thermodynamik der Verbrennungskraftmaschine”, Springer Verlag, Wien
SAMS, T. (1991): Fragen zur praxisbezogenen Motorprozessrechnung, Habilitation TU Graz
SEİFERT, H. (1990): 20 Jahre erfolgreiche Entwicklung des Programmsystems PROMO, “Motortechnische Zeitschrift”, Nr.11/1990
STANSKİ, U.; MELCHER, TH.; BERTHOLD, J.(1985): Rechnergestützte Ladungswechsel- auslegung, “Motortechnische Zeitschrift”, Nr.12/1985
WEHİNGER, D.; REGNER, G. (1992): “Motorprozeßrechensystem:MOSES - 2 Bedie- nungsanleitung”, Institut für VKM und Thd TU Graz, 1992