___

• Harmancıoğlu, M., Deri Kimyası, Ege Üniversitesi Ziraat Fakültesi Ofset, 1998, p.280.
• Harmancıoğlu, M., Ham Deri Yapısı Bileşimi Özellikleri, Özen Ofset, 1993, p. 1-2.
• Toptaş, A., Deri Teknolojisi. İ.Ü. Teknik Bilimler Meslek Yüksekokulu, Dericilik Programı, Sade Ofset Matbaacılık, 1993, p.230-232.
• Kral, N.A. and Trivelpiece, A. W., "Princıples ofplasma physics”, McGraw Hill book Company, New York, 2005, p.494.
• Kang, J. Y. and Sarmadi, M., “Plasma Treatment of TextilesSynthetic Polymer—Based Textiles”, AATCC Review, 2001, p.29-33.
• Karahan, H. A., “Atmosferik Plazma Kullanılarak Doğal Lif/erinin Yüzeysel Özelliklerinin Değiştirilmesi Üzerine Bir Araştırma", Yüksek Lisans Tezi, Ege Üniversitesi Fen Bilimleri Enstitüsü, 2007.
• Akan, T., “Maddenin 4. Hali Plazma ve Temel Özellikleri”, Elektronik Çağdaş Fizik Dergisi, 4, 2005, s.1-3.
• Thompson, W.B., “An Introduction to Plasma Physics, AddisonWesley Series in Advanced Physics”, Addison-Wesley Publishing Inc., 1962.
• Young, K.M., Iter E. and Naka J., "Measurement of plasma parameters”, ITER Physics Expert Group on Diagnostics and ITER Physics Basis Editors Nucl. Fusion, 39, 1999, p.2541.
• 10“ Anonim, www.uzaktanegitimplatformu.com, erişim tarihi: 12.07.2012.
• Wikipedia, “Plasma Physics”, http.'//en.wikipedia.org/wiki Plasma_physics, erişim tarihi: 17.07.2012
• Sturrock, Peter A., “Plasma Physics: An Introduction to the Theory of Astrophysical, Geophysical Laboratory Plasmas”, Cambridge University Press., 1994, p. 231.
• Kunkel, W. B., “Plasma physics in theory and application", McGraw-Hill book company, New York, 1966, p.494.
• Ko, T.S., Yang, S., Hsu, H. C., Chu, C.P., Lin, H.F., Liao, S.C., Lu, T.C., Kuo, H. C., Hsieh, W.F. and Wang, S.C., “ZnO nanopowders fabricated by dc thermal plasma synthesis ", Materials Science and Engineering, 134, 2006, p.54-58.
• Nasser, E., “Fundamentals of gaseous ionization and plasma electronics”, Wiley interscience, 1971, p.456.
• Erra, P., Molina, R., Jocic, D., Julia, M. R., Cuesta, A., Tascon, J. M. D., “Shrinkage Properties of Wool Treated with Low Temperature Plasma and Chitosan Biopolymer”, Textile Research Journal, Vol. 69, No.11, 1993, p.811-815.
• Diener electronic, “Plasma Surface Technology Technical Data Sheet”, www.dienerelectronic.de erişim tarihi: 01.01.2011.
• Dai, X.J. and viz Mr. L., “Study of Atmospheric and Low Pressure Plasma Modification on the Surface Properties of Synthetic and Natural Fibres", An Odyssey in Fibers and Space, Textile Institute 81 st World Conference Melbourne, Australia April., 2001.
• Nehra, S., Bhaumik, C.L., Mittal, M.L., Gulrajani, H.K. and Dwivedi K., “Atmospheric Pressure Non-thennal Plasma Source and Its Application in Textile Processing”, Melliand International, 11, 2005, p.60-61.
• Flügge, S., Handbuch der Physik/Encyclopedia of Physics band/volume XXI Electron-emission Gas discharges !. Springer— Verlag. First chapter of the article Secondary effects by P.F. Little, 1956.
• Bogaerts, A., “Mathematical modeling of direct current glow discharge in argon ”, Unıversıteıt Antwerpen, Unıversıtaıre Instellıng Antwerpen, 1996.
• Bogaerts, A., Neyts, E., Gijbels, R. and Mullen, J.J.A.M., “Gas discharge plasmas and their applications”, Spectrochimica Acta B, 57, 2003, p.609-658.
• Marcus, R.K., "Glow Discharge Spectroscopies”, Kluwer Academic Publishers (Modern Analytical Chemistry), 1993, p. 1-534.
• Kogelschatz, U., “Dielectric-barrier Discharges: Their History, Discharge Physics, and Industrial Applications”, Plasma Chemistıy and Plasma Processing, 23(1),2003, p. 1-46.
• Panousis, E., Clement, F., Loiseau, J-F., Spyrou, N., Held, B., Thomachot, M. and Marlin, L., "An electrical comparative study of two atmospheric pressure dielectric barrier discharge reactors", Plasma Sources Sci. Techno/. 15, 2006, p. 828-839. . Dhali, S.K. and Sardja, l., "Dielectric-barrier discharge for the removal of 802 from flue gas". (Abstract only). IEEE International Conference on Plasma Science, 2007.
• Riccardo, G. and G.S. Vaiana memorial lecture in Proceedinds of Physics of Solar and Stellar Coronae: G.S. Vaiana Memorial Symposium, ed. by J. F. Linsky and S. Serio. Kluwer Academic Publishers-Printed in the Netherlands, 1992, p. 3-19.
• Aschwanden, M.J., “Physics of the Solar Corona. An Introduction". Praxis Publishing Ltd., 2004.
• Shenton, M.J., Stevens G. C., Duan X., Wright N., “ChemicalSurface Modification of Polymers Using Atmospheric Pressure Nonequilibrium Plasmas and Comparisons with Vacuum Plasmas", Journal of Polymer Science: Part A: Polymer Chemistry, Vol. 40, 2002, p.95-109.
• Shenton, M.J., G.,C. Stevens, "Surface Modification of Polymer Surfaces:Atmospheric Plasma Versus Vacuum PIasmaTreatments", J. Phys. D: Appi. Phys., Vol. 34, 2001, p.2761-2768.
• Virk R.K, Ramaswamy G. N, Bourham M., Bures,B. L. “Plasma and Antimicrobial Treatment of Nonwoven Fabrics for Surgical Gowns", Textile Res. J., 2004, p. 120- 124.
• Seventekin, N. ve Özdoğan, E., “Atmosferik Plazma Tekniğinin Sentetik Tekstil Materyallerine Uygulanabilirliğinin Araştırılması ”, TÜBİTAK Projesi, 2008, p. 104.
• Gökalp, S.M., “Plazma Teknolojisinin Deri İşlentisinde Kullanılabilirliğinin Araştırılması”, Ege Üniversitesi Fen Bilimleri Enstitüsü Deri Mühendisliği Ana Bilim Dalı, Yüksek Lisans Tezi, İzmir, 2011.
• Eker, T., "Otomotiv Endüstrisinde Kullanılan Kaporta Sacının Plazma Ark Kaynağı ”, Selçuk Üniversitesi Teknik Bilimler Meslek Yüksek Okulu Teknik-Online Dergi, Cilt 9, Sayı 1, 2010, p. 67-78.
• Anonim, http://www.senkronyuzey.com/trTR/Default.aspx?c=24, erişim tarihi: 01.08.2012.
• Anonim, http://www.plasmatreat.com.tr/ucak_imalati.html, erişim tarihi: 01.08.2012.
• MEGEP, “Plazma TV", Elektrik Elektronik Teknolojisi, Ankara, 2007.
• Soloshenko, l.A., Tsiolko, V. V., Khomich, V.A., Shchedrin, A. I., Ryabtsev, A. V., Bazhenov, V. Yu. and Mikhno, I.L., “Sterilization of Medical Products in Low-Pressure Glow Discharges”, Plasma Physics Reports, Vol. 26, No. 9, 2000, pp. 792-800.
• Fridman, G., Peddinghaus, M., Ayan, H., Fridman, A., Balasubramanian, M., Gutsol, A., Brooks, A. and Friedman, G., “Blood Coagulation and Living Tissue Sterilization by Floating-Electrode Dielectric Barrier Discharge in Air", Plasma Chemical Plasma Process, 26, 2006, p.425-442.
• Lee, M.H., Park, B.J., Jin, S.C., Kim, D., Han I., Kim, J., Hyun, S., Chung, K-H. and Park, J-C., “Removal and sterilization of biofilms and planktonic bacteria by microwa ve-induced argon plasma at atmospheric pressure”, New Journal of Physics, 11,115022, 2009, p. 1.
• Joaquin, J. C., Kwan, C., Abramzon, N., Vandervoort, K. and Brel/es-Marino, G., “Is gas-discharge plasma new solution to the old problem of biofilm inactivation ?", Microbiology, USA, 155, 2009, p. 724—732.
• Mok, Y.S., Jo, J-O. and Whitehead, J.C., "Degradation of an azo dye Orange II using gas phase dielectric barrier discharge reactor submerged in water”, Chemical Engineering Journal, 142, 2008, p.56-64.
• Conner, Jesse R. and Hoeffner, Steve L., "The History of Stabilization/Solidification Technology, Critical Reviews in Environmental Science and Technology", 28(4), 1998, p.325- 396.
• Tankut,i., Kayranlı, B. ve Özbay, M., Katı Atık Bertarafından Plazma Isı Teknolojisi, http://ekutuphane.cmo.org.tr/pdf/700.pdf., erişim tarihi: 04.07.2011.
• Yaman, N., Özdoğan, E. ve Seventekin, N., “Atmosferik Plazma İşlemi Kullanılarak Poliamid Kumaş/arın Özelliklerinin Değiştirilmesi Üzerine Bir Araştırma”, Tekstil Teknolojileri Elektronik Dergisi, 3(1), 2009, p. 1-10.
• Kilic, B., Aksit, A.C ve Mutlu, M., “Surface modification and characterization of cotton and polyamide fabrics by plasma polymerization of hexamethyldisilaneand hexamethyldisiloxane International Journal of Clothing Science and Technology", Ankara, 21(2/3), 2009, p. 137-145.
• Long, J-J., Wang, H-W., Lu, T-O., Tang, R—C. and Zhu, Y-W., “Application of Low-Pressure Plasma Pretreatment in Silk Fabric Degumming Process", Plasma Chem Plasma Process, 28, 2008, p. 701-713.
• Lee K. and Pavlath A., "Low Temperature Plasma Treatment of Wool. ll. Effects of Variables on Shrinkage and Yarn Strength”, Journal of Polymer Science Part A:Polymer Chemistry, 12, 1972, p.2087-2090.
• Seul, S.D., Lim, J.M., Ha, SH. and Kim, Y.H., “Adhesion Enhancement of Polyurethane Coated Leather and Polyurethane Foam with Plasma Treatment", Korean J. Chem. Eng., 22(5), 2005, p. 745-749.
• Riccardi, C. and Bella, L.D., "Cold Plasma Treatment (CPT) for New High Quality Water Repellent Leathers, Tecna", Milano, 2004, p. 1-8.
• Osin, Y.N., Makhotkina, L.Y., Abutalipova, L.N., and Abdul/in, I. 8., “SEM and X—ray analysis of surface microstructure of natural leather processed in low temperature plasma", Pergamon, 51(2), 1998, p.221 -225.
• Choi, J.H., Lee, E.S., Baik, H.K., Lee, S-J., Song, K.M., Hwang and M.K., Huh, C.S., “Surface modification of natural leather using low-pressure parallel plate plasma”, Surface and Coatings Technology, 171, 2003, p.257-263.
• Yi, C., Yan, L., Shaohua, C., HJ, F. and Bi, S., "Oxygen Plasma Treated Polyurethane Leather Coating with Enhanced Water Vapour Permeability", Journal Of The Society Of Leather Technologists And Chemists, 94(5), 2010, p.05-211.