Color Stability of Flowable Composites in Different Viscosities

Objective: This in vitro study was aimed to evaluate the color stability of resin-based composite materials in different viscosities immersed in various colorant solutions.

Keywords:

Discoloration, repolishing, flowable composite viscosity, color stability,

PDF

___

1. Korkut B, Yanıkoğlu F, Günday M. Direct composite laminate veneers: three case reports. J Dent Res Dent Clin Dent Prospects 2013; 7(2):105-111.
2. Güler AU, Duran I, Yücel AÇ, Ozkan P. Effects of air-polishing powders on color stability of composite resins. J Appl Oral Sci 2011; 19: 505-510.
3. Gaengler P, Hoyer I, Montag R, Gaebler P. Micromorphological evaluation of posterior composite restorations - A 10 year report. J Oral Rehabil 2004; 31: 991-1000.
4. Lazzetti G, Burgess JO, Gardiner D, Ripps A. Color stability of fluoride-containing restorative materials. Oper Dent 2000; 25: 520-525.
5. Sarac D, Sarac YS, Kulunk S, Ural C, Kulunk T. The effect of polishing techniques on the surface roughness and color change of composite resins. J Prosthet Dent 2006; 96: 33-40.
6. Rajkumar K, Kumar S, Mahalaxmi S, Ragavi P, Mageshwaran TA. Colour stability of resin composites after emersing in coffee of different temperature - an in vitrostudy. SRM J Dent Sci 2011; 2: 91-95.
7. Janus J, Fauxpoint G, Arntz Y, Pelletier H, Etienne O. Surface roughness and morphology of three nanocomposites after two different polishing treatments by a multitechnique approach. Dent Mater 2010; 26: 416-425.
8. Kocaağaoğlu H, Aslan T, Gürbulak A, Albayrak H, Taşdemir Z, Gumus H. Efficacy of polishing kits on the surface roughness and color stability of different composite resins. Niger J Clin Pract 2017; 20(5): 557-565.
9. Moraes RR., Goncalves LDS, Lancellotti AC, et al. Nanohybrid resin composites: nanofiller loaded materials or traditional microhybrid resins?. Oper Dent 2009; 34(5): 551-557.
10. Vichi A, Ferrari M, Davidson CL. Color and opacity variations in three different resin-based composite products after water aging. Dent Mater., 2004; 20: 530–534.
11. Mitra SB, Wu D, Holmes BN. An application of nanotechnology in advanced dental materials. J Am Dent Assoc 2003; 134: 1382–1390.
12. Plotino G, Buono L, Grande NM, Pameijer CH, Somma F. Nonvital tooth bleaching: a review of the literature and clinical procedures. J Endod 2008; 34: 394-407.
13. Berger SB, Palialol ARM, Cavalli V, Giannini M. Surface roughness and staining susceptibility of composite resins after finishing and polishing. J Esthet Restor Dent 2011; 23(1): 34-43.
14. Jefferies SR. The art and science of abrasive finishing and polishing in restorative dentistry. Dent Clin North Am 1998; 42: 613-627.
15. Ölmez A, Kisbet S. Kompozit rezin restorasyonlarda bitirme ve polisaj işlemlerindeki yeni gelişmeler. Acta Odontol Turc 2013; 30(2): 115-122.
16. Barutcugil C , Yildiz M. Intrinsic and extrinsic discoloration of dimethacrylate and silorane based composites. J Dent 2012; 40: 57-63.
17. Ceci M, Viola M, Rattalino D, Beltrami R, Colombo M, Poggio C. Discoloration of different esthetic restorative materials: A spectrophotometric evaluation. Eur J Dent 2017; 11(2): 149-156.
18. O’Brien WJ, Groh CL, Boenke KM. A new, small color difference equation for dental shades. J Dent Res 1990; 9(11): 1762-1764.
19. Douglas RD, Steinhauer TJ, Wee AG. Intraoral determination of the tolerance of dentists for perceptibility and acceptibility of shade mismatch. J Prosthet Dent 2007; 97(4): 200-208.
20. Tuncer S, Demirci M, Tiryaki M, Ünlü N, Uysal Ö. The effect of a modeling resin and thermocycling on the surface hardness, roughness, and color of different resin composites. J Esthet Restor Dent 2013; 25(6): 404-419.
21. Kim BJ, Lee YK. Influence of the shade designation on the color difference between the same shade-designated resin composites by the brand. Dent Mater 2009; 25(9): 1148-1154.
22. Zimmerli B, Koch T, Flury S, Lussi A. The Influence of Toothbrushing and Coffee Staining on Different Composite Surface Coatings. Clin Oral Investig 2012; 16(2): 469-479.
23. Celik EU, Aladağ A, Türkün LŞ, Yilmaz G. Color changes of dental resin composites before and after polymerization and storage in water. J Esthet Restor Dent 2011; 23(3): 179-188.
24. Pedroso LB, Barreto LF, Miotti LL, Nicolosoo GF, Durand LB. Effect of a surface sealant on the color stability of composite resins after immersion in staining solution. Gen Dent 2016; 64(2): 22-25.
25. Tekçe N, Pala K, Tuncer S, Demirci M. The effect of surface sealant application and accelerated aging on posterior restorative surfaces: An SEM and AFM study. Dent Mater 2017; 36(2): 182-189.
26. Ragain JC, Jonston WM. Color acceptance of direct dental restorative materials by human observers. Color Res Appl 2000; 25(4): 278-285.
27. Johnston WM, Kao EC. Assessment of appearance match by visual observation and clinical colorimetry. J Dent Res. 1989; 68(5): 819-822.
28. AlShaafi MM. Factors affecting polymerization of resin- based composites: A literature review. Saudi Dent J 2017; 29: 48-58.
29. Ardu S, Braut V, Gutemberg D, Krejci I, Dietschi D, Feilzer AJ. A long-term laboratory test on staining susceptibility of esthetic composite resin materials. Quintessence Int 2010; 41(8): 695-702.
30. Baroudi K, Rodrigues JC. Flowable resin composites: A Systematic review and clinical considerations. J Clin Diagn Res 2015; 9: 18–24.
31. Dietschi D, Campanile G, Holz J, Meyer JM. Comparison of the color stability of ten new-generation composites: An in vitro study. Dent Mater 1994; 10: 353–362.
32. Fontes ST, Fernández MR, de Moura CM, Meireles SS. Color stability of a nanofill composite: Effect of different immersion media. J Appl Oral Sci 2009; 17: 388–391.
33. Szesz A, Parreiras S, Martini E, Reis A, Loguercio A. Effect of flowable composites on the clinical performance of non-carious cervical lesions: A systematic review and meta-analysis. J Dent 2017; 65: 11-21.
34. JI Rosales-Leal, RD Castillo-Salmeron, MA Molino-Serrano, H Gonzalez-Moreira, MA Cabrerizo-Vilchez. Effect of hygroscopic expansion of resin filling on interfacial gap and sealing: a confocal microscopy study, J Adhes Dent 2013; 15: 423-430.
35. Abiodun-Solanke I, Ajayi D, Arigbede A. Nanotechnology and its application in dentistry. Ann Med Health Sci Res 2014; 4: 171–177.
36. Shaalan OO, Abou-Auf E, El Zoghby AF. Clinical evaluation of flowable resin composite versus conventional resin composite in carious and noncarious lesions: Systematic review and meta-analysis. J Conserv Dent 2017; 20(6): 380-385.
37. Sideridou I, Tserki V, Papanastasiou G. Study of water sorption, solubility and modulus of elasticity of light-cured dimethacrylate-based dental resins. Biomater 2003; 24:655–665.
38. Bagheri R, Burrow MF, Tyas M. Influence of food-simulating solutions and surface finish on susceptibility to staining of aesthetic restorative materials. J Dent 2005; 33(5): 389-398.
39. Zajkani E, Abdoh Tabrizi M, Ghasemi A, Torabzade, H, Kharazifard M. Effect of staining solutions and repolishing on composite resin color change. J Islam Dent Assoc 2013; 25(3): 139-146.
40. Llena C, Fernández S, Forner L. Color stability of nanohybrid resin-based composites, ormocers and compomers. Clin Oral Invest 2017; 21(4): 1071-1077.
41. Poggio C, Dagna A, Chiesa M, Colombo M, Scribante A. Surface roughness of flowable resin composites eroded by acidic and alcoholic drinks. J Conserv Dent 2012; 15: 137–140.
42. Villalta P, Lu H, Okte Z, Garcia-Godoy F. Effects of staining and bleaching on color change of dental composite resins. J Prosthet Dent 2006; 95(2): 137-142.
43. Manabe A, Kato Y, Finger WJ, Kanehira M, Komatsu M, Werner J. Discoloration of coating resin exposed to staining solutions in vitro. Dent Mater 2009; 28(3): 338-343.