Mahir Doğan, Keriman Şanlı, Gizem Güler, Yusuf Över

The Production and Characterization of Aluminum Barrier Laminate Tubes and Comparison of Mechanical Properties with Reference Material

This study investigates the characterization of aluminum barrier laminate tubes and how mechanical properties change by difference of polymeric raw materials. In this study, four different prototypes have been produced and compared with themselves plus two different references. References have been obtained from the market with taking into consideration of the most common ones. After the examination of cross section images, it has observed that the main difference of produced prototypes from reference sample is layer distribution. Main layers are thicker in prototypes than reference samples. Prototypes have been produced by different formula and in some cases, different raw materials. Characterization measurements were taken by dynamic scattering calorimetric thermograms. For comparison of mechanical properties, young modulus values were obtained by using tensile meter for measurements of 250μm thickness 25mm wide, 50mm length foil samples. Aim of this study is the discovering possible ways of reaching 600-700 N/mm2 in young modulus value by different formula like reference samples.

PDF

___

1. Horodytska , O, Valdes, F, Fullana, A. 2018. Plastic Flexible films waste management- A state of review. Waste Management; 77: 413-425.
2. Geyer, R, Jambeck, J, Law, K. 2017. Production, use and fate of all plastics ever made. Science Advances; 3: 1-5.
3. A Brief History of Packaging; University of Florida Cooperative Extension Service, Institute of Food and Agricultural Sciences, EDIS, 2002; pp 1.
4. Laminate Tubes. Laminated-tubes.com/laminate-tubes (accessed at 26.01.2021).
5. Maurice, T, Suter, J, Miskevich, R. (2013). Laminated Material Suitable for Forming Containers. US 8,377,532 B2. United States Patent.
6. Bhattacharya, S, Banerjee, M. (2014). Aluminum Barrier Laminate. US 2014/0186561 A1. United States Patent.
7. Zuscik, E. (1985). Laminate for Making Tubes. 4,539,259. United States Patent.
8. Laminate Tubes. Timsors.com.mk/en/products/aluminum-and-pvc-packaging-for-pharmaceutical-industry/laminate-tubes.html (accessed at 26.01.2021).
9. Feng, J, Li, Z, Olah, A, Baer, E. 2018. High oxygen barrier multilayer EVOH/LDPEfilm/foam. Journal of Applied Polymer Science; 135: 46425.
10. Tube Packaging: How to print on lami tube material. blog.mps4u.com/tube-packaging-how-to-print-on-lami-tube-material (accessed at 27.01.2021).
11. Fonseca, C, Harrison, I. 1997. An investigation oof co-crystallization in LDPE/HDPE blends using DSC and TREF. Thermochimica Acta; 313: 37-41.
12. Aydemir, B, Elmas, B, Ayan, E. 4th International Mediterranean Science and Engineering Congress (IMSEC 2019), Alanya, Antalya, Turkey, 2019, 597-603.
13]. Abbas‐ Abadi, Mehrdad Seifali, Mehdi Nekoomanesh Haghighi, and Hamid Yeganeh. "Effect of the melt flow index and melt flow rate on the thermal degradation kinetics of commercial polyolefins." Journal of applied polymer science 126.5 (2012): 1739-1745.
[14]. Durmus, Ali, Mine B. Alanalp, and Ismail Aydin. "Investigation of morphological, rheological, and mechanical properties of cyclic olefin copolymer/poly (ethylene-co-vinyl acetate) blend films." Journal of Plastic Film & Sheeting 34.2 (2018): 140-159.

Celal Bayar Üniversitesi Fen Bilimleri Dergisi-Cover

ISSN: 1305-130X
Başlangıç: 2005
Yayıncı: Manisa Celal Bayar Üniversitesi Fen Bilimleri Enstitüsü

Arşiv