Compensation of Errors in Multi-Channel Analog-to-Digital Convertors at Signal Processing of Multidimensional Arrays
Compensation of Errors in Multi-Channel Analog-to-Digital Convertors at Signal Processing of Multidimensional Arrays
Sources of the errors and compensating methods at multi-channel analogto-digital
convertor (ADC), in which an output signal is a many-dimensional array or
set of the one-dimensional arrays, are considered. The source of the error in the common
sample-and-hold (SH) circuit of the modern ADC for several channels is analyzed. Methods
of errors compensation in time and frequency domains for the algorithm of geometrical
coordinates of a signal source determining are analyzed.
___
- [1] TMS320x280x, 2801x, 2804x DSP Analog-to-Digital Converter (ADC) Reference Guide, Texas Instruments, Literature Number: SPRU716D, November 2004-Revised April 2010, http://www.ti.com/lit/ug/spru716d/spru716d.pdf. Online; accessed 08-May-2012.
- [2] Yu. Alyeksyeyenkov, Calculation of signal sources coordinates in 2D and 3D space, C¸ ankaya University Journal of Arts and Sciences 9 (2008), 7–15.
- [3] V. Didenko, A. Minin and A. Movchan, Polynomial and piece-wise linear approximation of smart transducer errors, Measurement 31 (2002), 61–69.
- [4] A. V. Oppenheim, A. S. Willsky and S. H. Nawab, Signals and Systems, Prentice Hall 1997.