An Electrodeposition Method of Nickel–Graphene Composite Coatings on Ti–6Al–4V alloy

The main objective of this work has been the deposition of Nickel (Ni)–Graphene nanoplatelets (GNPs) composite coatings onto Ti-6Al-4V alloy plates via a pulse electrodeposition technique from a Watt’s type bath. The characterization of the coatings was done by structural surveys, hardness measurements and wear tests. In this current work, XRD and SEM analysis demonstrated the better grained and compact property of the Ni-GNPs deposits. The surface roughness of the composite coatings was significantly decreased with the addition of GNPs. Furthermore, the incorporation of GNPs into the Ni matrix improved both hardness and wear behaviour of the composite coating compared to the pure Ni coating.

Keywords:

Electrodeposition Titanium, Surface modification,

PDF

___

Algul, H., Tokur, M., Ozcan, S., Uysal, M., Cetinkaya, T., Akbulut, H., Alp, A. (2015). The effect of graphene content and sliding speed on the wear mechanism of nickel–graphene nanocomposites. Applied Surface Science, 359, 340–348.
Baraka, A.M., Hamed, H.A. Shaarawy, H.H. (2002). Electrodeposition of rhodium metal on titanium substrates. Anti Corrosion Methods and Materials, 49 (4), 277-282.
Kumar, K.A., Kalaignan, G.P., Muralidharan, V. S. (2013). Direct and pulse current electrodeposition of Ni–W–TiO2 nanocomposite coatings. Ceramics International, 39 (3), 2827-2834.
Mindivan, F. (2017). Effect of Graphene Nanoplatelets (GNPs) on Tribological and Mechanical Behaviors of Polyamide 6 (PA6). Tribology in Industry, 39 (3), 277-282.
Pohrelyuk, I.M., Sheykin, S.E., Padgurskas, J., Lavrys, S.M.. (2018). Wear resistance of two-phase titanium alloy after deformation-diffusion treatment. Tribology International, 127, 404–411.
Rashad, M., Pan, F., Tang, A., Asif, M. (2014). Effect of Graphene Nanoplatelets addition on mechanical properties of pure aluminum using a semi-powder method. Progress in Natural Science: Materials International, 24, 101–108.
Roodposhti, P.S., Farahbakhsh, N., Sarkar, A., Murty, K.L. (2018). Microstructural approach to equal channel angular processing of commercially pure titanium—A review. Trans. Nonferrous Met. Soc. China 25, 1353−1366.
Uysal, M., Akbulut,H., Tokur,M., Algül,H., Çetinkaya, T. (2016). Structural and sliding wear properties of Ag/Graphene/WC hybrid nanocomposites produced by electroless co-deposition. Journal of Alloys and Compounds, 654, 185-195.
Yu,Q., Zhou,T., Jiang, Y., Yan,X., An, Z., Wang, X., Zhang, D., Ono, T. (2018). Preparation of graphene-enhanced nickel-phosphorus compositefilms by ultrasonic-assisted electroless plating. Applied Surface Science, 435, 617–625.
Zhecheva,A., Sha, W., Malinov, S., Long, A. (2015). Enhancing the microstructure and properties of titanium alloys through nitriding and other surface engineering methods. Surface & Coatings Technology, 200, 2192 – 2207