Hüseyin YÖRÜR, Deniz AYDEMİR, Burhanettin UYSAL

Emprenye Edilmiş Ahşap Malzemenin Yapışma Direncini Etkileyen Faktörler

İnsanlık tarihi boyunca en yaygın hammadde ahsap olmuştur. Sanayinin gelişmesiyle tüketim artmış ve alternatif

Anahtar Kelimeler:

Lamine malzeme, Yapışma direnci, Emprenye, Tutkal

The Factors Affecting on Bonding Strength of Impregnated Wood Material

Wood has used commonly during human history. Its consumption was increased with developing forestindustries and then require of alternative materials raised. As a result of them, laminated materials wereproduced with bonding of low quality wood materials. The materials obtained started to using in a lot of areas.For improving to use at indoor and outdoor of laminated wood materials, Wood materials was impregnated withdifferent materials. After impregnation process, bonding ability of wood materials was increased as woodabsorbed in water in use area. By the way, it is an important status at bonding of wood material with each other.With increasing bonding strength, good materials can be obtained. In the opposite status, it can occur differentfailures. It was well know factors affecting bonding for preventing these failures. In the study, it was investigatedin factors affecting on bonding of wood materials with each other and adhesive.

Keywords:

Laminated materials, Bonding strength, Impregnation, Adhesion,

PDF

___

o Blew, J.O., Davidson, H.L. 1971 Preservative retentions and penetration in the treatment of white fir. Proceedings of American Wood Preservers’ Association. 67: 204–221.
o Bozkurt, A.Y., Göker, Y., Erdin, N. 1993 Emprenye Tekniği, İstanbul Üniversitesi Orman Fakültesi, İ.Ü. Yayın No: 3779, O.F. Yayın No: 425, ISBN 975-404-327-2, İstanbul.
o Cassens, D.L., Johnson, B.R., Feist, W.C., De Groot, R.C. 1995. Selection and use of preservative-treated wood. Publication N. 7299. Madison, WI: Forest Products Society.
o Chung, Y. 1968. Glueability of southern pine early and late wood, Forest Products Journal, Vol. 18, No: 2. USA.
o Duran, V. 2005. Ağaç Malzemede Rendeleme Faktörlerinin Yüzey pürüzlülüğüne etkileri, Bilim Uzmanlığı Tezi, Karaelmas Üniversitesi Fen Bilimleri Enstitüsü, Karabük
o Findlay, W.P.K. 1985. Preservation of Timber In The Tropics, Martinus Nijhoof/DR W. Junk Publishers, ISBN 90-247-3112-7 Dordrecht, Netherlands.
o Franklin Glue Comp. 1989. Adhesive Trouble Shooting, Colombus, USA.
o Göker, Y. ve Bozkurt, Y. 1986. Tabakalı Ağaç Malzeme Teknolojisi, İ.Ü. Orman Fakültesi yayını, İstanbul
o Huş, S. 1977. Ahşap Yapıştırıcılar kitabı, İstanbul Üniversitesi Orman Fakültesi, İstanbul
o Ibach, R.E. 1999. Wood Preservation. In Wood handbook, Forest Products Laboratory. FPL–GTR–113, Madison, WI: U.S. Department of Agriculture, Forest Service, 330-340 p.
o Kaygın, B., 1997 Ahşap Yüzeylerde Kullanılan Opak Boyaların Dayanım Özellikleri, Yüksek Lisans Tezi, Karaelmas Üniversitesi Fen Bilimleri Enstitüsü, Bartın
o Keimel, F.A. 2003. Historical development of adhesives and adhesive bonding. In: Pizzi, A. and Mittal, K.L. (Eds.), Handbook of Adhesive Technology (2nd ed.). Marcel Dekker, New York, chap. 1, pp. 1–12.
o Laks, P. E., Haataja, B.A., Palardy, R.D., Bianchini, R.J. (1988) Evaluation of adhesives for Bonding Borate Treated Flakeboards. Forest Products Journal, 38 (11/12): 23–24.
o Kurt, Ş. 2006. Emprenye Edilmiş Lamine Ağaç Malzemelerin Deniz Ortamında Bazı Teknolojik Özelliklerinin Değişimi, Doktora Tezi, Zonguldak Karaelmas Üniversitesi Fen Bilimleri Enstitüsü, Zonguldak.
o Okçu, O. 2005. Emprenye Edilmiş Lamine Ağaç Malzemelerin Yapışma ve Yanma Özellikleri, Bilim Uzmanlığı Tezi, Karaelmas Üniversitesi Fen Bilimleri Enstitüsü, Karabük
o Örs, Y., Atar, M., Özçifçi, A. 2000. Bonding Strength of Poly (vinyl acetate)-based adhesive in some wood materials treated with impregnation, Journal of Applied Polymer Science, 76, 1472-1479.
o Örs, Y., Atar, M., Keskin, H. 2004. Bonding strength of some adhesives in wood materials impregnated with Imersol-Aqua, International Journal of Adhesion & Adhesives, 24 (2004), pp. 287–294.
o Özalp, M., Korkut, S. 2009. The Effect of Air Dried Conditions on Mechanical and Physical Properties of Laminated and Impregnated Wood. African Journal of Biotechnology, 8 (8): 1695-1702.
o Özçifçi, A. 2005. Ahşap Tutkalları, Basılmamış Ders Notları, Z.K.Ü.Karabük Teknik Eğtitim Fakültesi, Karabük
o Özçifçi, A. 2006. Effects of Boron Compounds on the Bonding Strength of PF & MF adhesives to impregnated wood materials, Journal of Adhesion Science and Technology, 20 (10): 1147-1153.
o Richardson, B.A. 1994. Wood preservation. Spon press, ISBN 0419174907, New York, USA.
o River, B.H. 1994. Fracture of adhesively-bonded wood joints. In: Pizzi, A. and Mittal, K.L. (Eds.), Handbook of Adhesive Technology. Marcel Dekker, New York, chap. 9.
o Rowell, R. 2005. Handbook of Wood Chemistry and Wood Composites. CRC Press, ISBN 0-8493-1588-3, New York, USA.
o Selbo, M.L. 1975. Adhesive Bondıng of Wood, Dep. Agr . Tecnıcal Bulletin No :1512,1-3, 61, Washıngton.
o Skeist, I. and Miron, J. 1990. Introduction to adhesives. In: Skeist, I. (Ed.), Handbook of Adhesives. (3rd) Van Nostrand Reinhold, New York, chap 1.
o Şenay, A. 1996. Lamine Edilmiş Ağaç Malzemenin Teknolojik Özellikleri, Doktora Tezi, İ.Ü. Fen Bilimleri Enstitüsü, İstanbul.
o Uysal, B. ve Kurt, Ş. 2005. Yanmayı Geciktirici Bor İçerikli Emprenye Maddelerinin Ahşap Malzemenin Yapışma Direncine Etkisi, I. Ulusal Bor Çalıştayı Bildiriler Kitabı, sayfa 43, Ankara.
o Uysal, B. 2005. Ağaç Malzeme Ders Notları, , Z.K.Ü.Karabük Teknik Eğtitim Fakültesi, Karabük
o Vick, C. B. 1993. Christiansen AW. Cure of phenol-formaldehyde adhesive in the presence of CCA-treated wood by differential scanning calorymetry. Wood and Fiber Science; 25(1): pp. 77–86.
o Vick, C. B. 1999. Adhesive Bonding of Materials. In Wood handbook, Forest Products Laboratory. FPL–GTR–113, Madison, WI: U.S. Department of Agriculture, Forest Service, 190-210 p.