Ahmet KAYABAŞI, Selami BALCI, Berat YILDIZ

ANFIS Based Parameter Estimating of a Two-Phase Interleaved Dual Cascaded DC-DC Boost Converter for Fuel Cell Supplied Electric Vehicles

Fuel cells (FCs), one of the renewable energy sources, have started to be preferred as a power source in electric vehicles in recent years and research studies are continuing on designs in this direction. Although their efficiency is low

PDF

___

[1] W. Choi, PN. Enjeti, JW. Howze, Development of an equivalent circuit model of a fuel cell to evaluate the effects of inverter ripple current, Nineteenth Annual IEEE Applied Power Electronics Conference and Exposition. 1 (2004) 355-361.
[2] JW. Jung, A. Keyhani, Control of a fuel cell-based Z-source converter, IEEE Transactions on Energy Conversion. 22(2) (2007) 467-476.
[3] Z. Zhang, et al., A review and design of power electronics converters for fuel cell hybrid system applications, Energy Procedia. 20 (2012) 301-310.
[4] HJ. Chiu, LW. Lin, A bidirectional DC-DC converter for fuel cell electric vehicle driving system, IEEE Transactions on Power Electronics. 21(4) (2006) 950-958.
[5] A. Shahin, M. Hinaje, J.P. Martin, S. Pierfederici, S. Raël, B. Davat, High Voltage Ratio DC–DC Converter for Fuel-Cell Applications, IEEE Transactions on Industrial Electronics. 57(12) (2010) 3944-3955.
[6] M. Bahrami, J.P. Martin, G. Maranzana, S. Pierfederici, M. Weber, F. Meibody-Tabar, M. Zandi, Design and modeling of an equalizer for fuel cell energy management systems, IEEE Transactions on Power Electronics. DOI 10.1109/TPEL.2019.2899150, (2019).
[7] C. Liu, A. Johnson, JS. Lai, A novel three-phase high-power soft-switched DC/DC converter for low-voltage fuel cell applications, IEEE Transactions on Industry Applications. 41(6) (2005) 1691-1697.
[8] KC. Tseng, JT. Lin, CC. Huang, High step-up converter with three-winding coupled inductor for fuel cell energy source applications, IEEE Transactions on Power Electronics. 30(2) (2004) 574-581.
[9] M. Nymand, MA. Andersen, High-efficiency isolated boost DC-DC converter for high-power low-voltage fuel-cell applications, IEEE Transactions on industrial electronics 57(2) (2010) 505-514.
[10] DM. Bellur, MK. Kazimierczuk, DC-DC converters for electric vehicle applications 2007, Electrical Insulation Conference and Electrical Manufacturing Expo 2007. (2007) IEEE.
[11] CT. Pan, CM. Lai. A high-efficiency high step-up converter with low switch voltage stress for fuel-cell system applications, IEEE Transactions on Industrial Electronics. 57(6) (2009) 1998-2006.
[12] P. Thounthong, B. Davat, Study of a multiphase interleaved step-up converter for fuel cell high power applications, Energy Conversion and Management. 51(4) (2010) 826-832.
[13] T. Takiguchi, K. Furukawa, K. Matsumura, H. Koizumi, Interleaved Soft-Switching Multilevel Boost Converter with Coupled Inductor, 41st Annual Conference of the IEEE Industrial Electronics Society, IECON, Yokohama, Japan. (2015).
[14] S. Balci, N. Altin, H. Komurcugil, Sefa I, Performance Analysis of Interleaved Quadratic Boost Converter with Coupled Inductor for Fuel Cell Applications, 42st Annual Conference of the IEEE Industrial Electronics Society, IECON, Italy. (2016) 3541-3546.
[15] MIRZAEI, Amin, et al. Analysis and design of a high efficiency bidirectional DC–DC converter for battery and ultracapacitor applications. Simulation Modelling Practice and Theory, 2011, 19.7: 1651-1667.
[16] AU. Chávez-Ramírez AU et al., High power fuel cell simulator based on artificial neural network, International Journal of Hydrogen Energy. 35(21) (2010) 12125-12133.
[17] X. Kong, AM. Khambadkone, Modeling of a PEM fuel-cell stack for dynamic and steady-state operation using ANN-based submodels, IEEE Transactions on Industrial Electronics. 56(12) (2009) 4903-4914.
[18] Sabancı K , Balcı S , Aslan M . Estimation of the switching losses in DC-DC boost converters by various machine learning methods. Journal of Energy Systems. 2020; 4(1): 1-11.
[19] Balci, S., Kayabasi, A., Yildiz, B. Estimation of Fuel Cell Parameters with ANFIS. 7th Eur. Conf. Ren. Energy Sys. (2019), Madrid, Spain.
[20] AM. Azmy, I. Erlich, Online optimal management of PEM fuel cells using neural networks, IEEE Transactions on Power Delivery. 20(2) (2005) 1051-1058.
[21] JS. Jang, ANFIS: adaptive-network-based fuzzy inference system. IEEE Transactions on Systems, Man, and Cybernetics. 23(3) (1993) 665-685.
[22] JSR. Jang, Fuzzy modeling using generalized neural networks and the Kalman filter algorithm, In: AAAI Association for the Advancement of Artificial Intelligence. 91 (1991) 762-767.
[23] MT. Güneşer, Artificial intelligence solution to extract the dielectric properties of materials at sub-THz frequencies, IET Science, Measurement & Technology. (2019). DOI:10.1049/iet-smt.2018.5356.
[24] S. Balci, A. Kayabasi, B. Yildiz, ANN-based estimation of the voltage ripple according to the load variation of battery chargers, International Journal of Electronics. (2019). Doi:https://doi.org/10.1080/00207217.2019.1591530.